Contact-reactive brazing of CoCrFeMnNi high-entropy alloy to Zr alloys using Cu interlayer

[1]  W. Fu,et al.  Insights into the adsorption and interfacial products improving the wetting of the Ag-Ti/graphite and Cu-Ti/graphite systems: A first-principles calculation , 2023, Surfaces and Interfaces.

[2]  Kenneth C. Liu,et al.  Ni interlayer induced strengthening effect in alumina / alumina joint bonded with Ti / Cu / Ni / Cu / Ti composite foils , 2023, Journal of the European Ceramic Society.

[3]  X. Yang,et al.  Microstructure and Mechanical Properties of Zr‐4 Alloy and 316 Stainless Steel Diffusion Bonding Joint Using Nb/Ni Composite Interlayer , 2023, Advanced Engineering Materials.

[4]  Yuchao Shi,et al.  Experimental investigation and thermodynamic modeling of phase equilibria in the Ag-Ni-Zr ternary system. , 2022, Physical chemistry chemical physics : PCCP.

[5]  G. Wang,et al.  Brazing SiC ceramics and Zr with CoCrFeNiCuSn high entropy alloy , 2022, Ceramics International.

[6]  T. Finstad,et al.  Synthesis, microstructure, and thermoelectric properties of Sb-Based high entropy alloys , 2022, Intermetallics.

[7]  Y. Lv,et al.  Superior cycle life of TiZrFeMnCrV high entropy alloy for hydrogen storage , 2022, Scripta Materialia.

[8]  Y. Zhu,et al.  Growth Kinetics of Second Phase Particles in N36 Zirconium Alloy: Zr-Sn-Nb-Fe , 2022, Journal of Materials Research and Technology.

[9]  P. He,et al.  Vacuum brazing TiAl intermetallics to GH3030 alloy with a multi-component Ti-based filler metal , 2021, Journal of Manufacturing Processes.

[10]  M. Shamanian,et al.  Microstructural and mechanical properties assessment of transient liquid phase bonding of CoCuFeMnNi high entropy alloy , 2021, Transactions of Nonferrous Metals Society of China.

[11]  A. Fattah‐alhosseini,et al.  Surface characterization of bioceramic coatings on Zr and its alloys using plasma electrolytic oxidation (PEO): A review , 2021, Surfaces and Interfaces.

[12]  S. Guo,et al.  Design of corrosion-resistant high-entropy alloys through valence electron concentration and new PHACOMP , 2021 .

[13]  Biaobiao Yang,et al.  Phase equilibria thermodynamics and solidified microstructure in the Ag-Cr-Zr system , 2021 .

[14]  Xiaoguo Song,et al.  Investigation on the microstructure and mechanical properties of CoCrFeNi high-entropy alloy joint bonded with BNi2 interlayer , 2021 .

[15]  Yong Du,et al.  Experimental investigation and thermodynamic assessment of the Mn–Zr system , 2021 .

[16]  Jinglong Li,et al.  Microstructure and mechanical properties of the brazed region in the AlCoCrFeNi high-entropy alloy and FGH98 superalloy joint , 2021 .

[17]  Xiaojing Wang,et al.  Diffusion bonding of copper to titanium using CoCrFeMnNi high-entropy alloy interlayer , 2021 .

[18]  L. Tsay,et al.  Vacuum brazing Zircaloy-2 alloy with a clad 60Ti–25Ni–15Nb filler , 2020 .

[19]  Lin Yuan,et al.  Effects of pure Ti or Zr powder on microstructure and mechanical properties of Ti6Al4V and Ti2AlNb joints brazed with TiZrCuNi , 2020 .

[20]  V. Levitas,et al.  In situ quantitative study of plastic strain-induced phase transformations under high pressure: Example for ultra-pure Zr , 2019, Acta Materialia.

[21]  R. Shiue,et al.  Dissimilar Infrared Brazing of CoCrFe(Mn)Ni Equiatomic High Entropy Alloys and 316 Stainless Steel , 2019, Crystals.

[22]  Jing-jing Wang,et al.  Investigation on the structures of τ1 and τ2 compounds in the Zr–Fe–Cu system and phase equilibria of the Zr–Nb–Fe–Cu system , 2019, Journal of Nuclear Materials.

[23]  Tianpeng Wang,et al.  Numerical analysis on the residual stress distribution and its influence factor analysis for Si3N4/42CrMo brazed joint , 2019, Simul. Model. Pract. Theory.

[24]  Z. Wang,et al.  The effect of Al content on microstructures and comprehensive properties in AlxCoCrCuFeNi high entropy alloys , 2019, Vacuum.

[25]  Z. W. Yang,et al.  Interfacial microstructure and mechanical properties of TC4/Ti3SiC2 contact-reactive brazed joints using a Cu interlayer , 2018, Ceramics International.

[26]  K. Feng,et al.  Zr–Cu alloy filler metal for brazing SiC ceramic , 2018, RSC advances.

[27]  Jie Zhang,et al.  Microstructure and mechanical properties of the SiC/Zr4 joints brazed with TiZrNiCu filler for nuclear application , 2018, Progress in Natural Science: Materials International.

[28]  Kenta Murakami,et al.  Current status of materials development of nuclear fuel cladding tubes for light water reactors , 2017 .

[29]  Aira Matsugaki,et al.  Novel TiNbTaZrMo high-entropy alloys for metallic biomaterials , 2017 .

[30]  J. Zollinger,et al.  Microstructure evolution of diffusion welded 304L/Zircaloy4 with copper interlayer , 2017 .

[31]  Yong Zhang,et al.  Irradiation Resistance in AlxCoCrFeNi High Entropy Alloys , 2015 .

[32]  Li Li,et al.  Effects of brazing temperature and testing temperature on the microstructure and shear strength of γ-TiAl joints , 2015 .

[33]  Hongsheng Chen,et al.  Effect of Ni interlayer on partial transient liquid phase bonding of Zr–Sn–Nb alloy and 304 stainless steel , 2014 .

[34]  Jung G. Lee,et al.  Brazing characteristics of a Zr–Ti–Cu–Fe eutectic alloy filler metal for Zircaloy-4 , 2013 .

[35]  C. Rhee,et al.  Growth of isothermally-solidified titanium joints using a multi-component Zr–Ti–Cu–Ni–Be amorphous alloy as a brazing filler , 2013 .

[36]  R. Shiue,et al.  Infrared Brazing Zirconium using Two Silver Based Foils , 2013 .

[37]  Steven J. Zinkle,et al.  Materials Challenges in Nuclear Energy , 2013 .

[38]  C. Rhee,et al.  Amorphous sputter coating of a multi-component Zr–Ti–Ni–Cu alloy as a filler for brazing Zircaloy-4 , 2012 .

[39]  Yong Zhang,et al.  Prediction of high-entropy stabilized solid-solution in multi-component alloys , 2012 .

[40]  S. Zhou,et al.  Phase stability for the Cu–Zr system: First-principles, experiments and solution-based modeling , 2010 .

[41]  P. Liaw,et al.  Solid‐Solution Phase Formation Rules for Multi‐component Alloys , 2008 .

[42]  Jai-Young Lee,et al.  Thermal stability and brazing characteristics of Zr–Be binary amorphous filler metals for zirconium alloy , 1998 .

[43]  Huijun Li,et al.  Stable bonding of W and ODS steel fabricated by TLP diffusion technology through inserting a novel composite interlayer Zr/Cu , 2022 .

[44]  Lin Yuan,et al.  Microstructure evolution and mechanical properties of diffusion bonding Al5(TiZrHfNb)95 refractory high entropy alloy to Ti2AlNb alloy , 2021 .

[45]  Jung G. Lee,et al.  Microstructural and mechanical characteristics of zirconium alloy joints brazed by a Zr–Cu–Al-based glassy alloy , 2015 .

[46]  M. Kramer,et al.  In situ observation of thermal expansion of tetragonal C11b phase in Zr2Cu(1−x)Pdx alloys , 2010 .