Combustion Chamber Effects on Burn Rates in a High Swirl Spark Ignition Engine

Experimental measurements of burn rates have been carried out in a single cylinger homogeneous charge engine. Three different combustion chambers were investigated (75 % and 60 % squish bowl-in-piston chambers and a disk chamber) using a cylinder head with a swirl producing intake port and near central spark location. Data were obtained with each combustion chamber as a function of spark timing, EGR, and load at 1500 RPM. The combustion rate is strongly influenced by chamber shape. The 10-90 % burn durations of the 75 % and 60 % squish chambers are respectively about 40 % and 60 % that of the disk chamber. Chamber configuration had less effect on 0-10 % burn duration. The disk had about 25 % longer 0-10 % burn time than the bowl-in-piston chambers. Modifications to the GESIM model enabled good overall agreement between predictions and experimental data, a rather severe test of the model because the coupling of fluid mechanics, combustion and chamber geometry must be properly modeled. An improved basic understanding of the influence of combustion chamber shape on burn rate has been achieved through the interactive use of experimental data and modeling. The results suggest that differences in turbulence intensity and flame area development due to changes in chamber shape are responsible for the observed burn rate differences.