Nanocomposite Membranes for PEM-FCs: Effect of LDH Introduction on the Physic-Chemical Performance of Various Polymer Matrices
暂无分享,去创建一个
[1] W. Wong,et al. Phosphorylated chitosan/poly(vinyl alcohol) based proton exchange membranes modified with propylammonium nitrate ionic liquid and silica filler for fuel cell applications , 2022, International Journal of Hydrogen Energy.
[2] Muhammad Habib Ur Rehman,et al. Elucidating the Water and Methanol Dynamics in Sulfonated Polyether Ether Ketone Nanocomposite Membranes Bearing Layered Double Hydroxides , 2022, Membranes.
[3] Shengyan Pu,et al. Constructing composite membranes from functionalized metal organic frameworks integrated MXene intended for ultrafast oil/water emulsion separation , 2022, Separation and Purification Technology.
[4] Jianquan Luo,et al. Self-cleaning photocatalytic MXene composite membrane for synergistically enhanced water treatment: Oil/water separation and dyes removal , 2022 .
[5] Dario R. Dekel,et al. Effect of LDH Platelets on the Transport Properties and Carbonation of Anion Exchange Membranes , 2021, Electrochimica Acta.
[6] Qingquan Lin,et al. Ultra-high oil-water separation membrane based on two-dimensional MXene(Ti3C2Tx) by co-incorporation of halloysite nanotubes and polydopamine , 2021 .
[7] W. Wong,et al. Hybrid Composite Membrane of Phosphorylated Chitosan/Poly (Vinyl Alcohol)/Silica as a Proton Exchange Membrane , 2021, Membranes.
[8] P. Okonkwo,et al. Nafion degradation mechanisms in proton exchange membrane fuel cell (PEMFC) system: A review , 2021, International Journal of Hydrogen Energy.
[9] N. Brandon,et al. Designing the next generation of proton-exchange membrane fuel cells , 2021, Nature.
[10] H. Farag,et al. Development novel eco-friendly proton exchange membranes doped with nano sulfated zirconia for direct methanol fuel cells , 2021, Journal of Polymer Research.
[11] Hyoung-Juhn Kim,et al. Nafion-Based Proton-Exchange Membranes Built on Cross-Linked Semi-Interpenetrating Polymer Networks between Poly(acrylic acid) and Poly(vinyl alcohol). , 2021, ACS applied materials & interfaces.
[12] Xiaodong Wang,et al. Multifunctional poly(ionic liquid)s cross-linked polybenzimidazole membrane with excellent long-term stability for high temperature-proton exchange membranes fuel cells , 2021 .
[13] A. Aricò,et al. New Insights into Properties of Methanol Transport in Sulfonated Polysulfone Composite Membranes for Direct Methanol Fuel Cells , 2021, Polymers.
[14] G. Corrente,et al. Anisotropic behavior of mechanically extruded sulfonated polysulfone: Implications for proton exchange membrane fuel cell applications , 2021 .
[15] C. Simari,et al. Polysulfone and organo-modified graphene oxide for new hybrid proton exchange membranes: A green alternative for high-efficiency PEMFCs , 2021, Electrochimica Acta.
[16] C. Simari,et al. Exploring the Structure–Performance Relationship of Sulfonated Polysulfone Proton Exchange Membrane by a Combined Computational and Experimental Approach , 2021, Polymers.
[17] Fred R. Bockmiller,et al. Polymer electrolyte membrane fuel cell and hydrogen station networks for automobiles: Status, technology, and perspectives , 2021 .
[18] A. Tursi,et al. A novel catalytic two-step process for the preparation of rigid polyurethane foams: synthesis, mechanism and computational studies , 2021 .
[19] S. Kundu,et al. A vast exploration of improvising synthetic strategies for enhancing the OER kinetics of LDH structures: a review , 2021 .
[20] P. Aranda,et al. Incorporating of layered double hydroxide/sepiolite to improve the performance of sulfonated poly(ether ether ketone) composite membranes for proton exchange membrane fuel cells , 2020, Journal of Applied Polymer Science.
[21] V. Baglio,et al. Sulfonated polyethersulfone/polyetheretherketone blend as high performing and cost-effective electrolyte membrane for direct methanol fuel cells , 2020 .
[22] C. Simari,et al. Highly-performing and low-cost nanostructured membranes based on Polysulfone and layered doubled hydroxide for high-temperature proton exchange membrane fuel cells , 2020 .
[23] A. Tursi,et al. Totally green cellulose conversion into bio-oil and cellulose citrate using molten citric acid in an open system: synthesis, characterization and computational investigation of reaction mechanisms , 2020, RSC advances.
[24] A. Aricò,et al. Barrier properties of sulfonated polysulfone/layered double hydroxides nanocomposite membrane for direct methanol fuel cell operating at high methanol concentrations , 2020 .
[25] D. Gournis,et al. Titanium Dioxide Grafted on Graphene Oxide: Hybrid Nanofiller for Effective and Low-Cost Proton Exchange Membranes , 2020, Nanomaterials.
[26] W. Daud,et al. Sulfonated graphene oxide as an inorganic filler in promoting the properties of a polybenzimidazole membrane as a high temperature proton exchange membrane , 2020 .
[27] K. Pal,et al. Novel sulfonated poly (ether ether ketone)/rGONR@TiO2 nanohybrid membrane for proton exchange membrane fuel cells , 2020 .
[28] L. Wang,et al. Synthesis and preparation of branched block polybenzimidazole membranes with high proton conductivity and single-cell performance for use in high temperature proton exchange membrane fuel cells , 2020, Journal of Membrane Science.
[29] C. Simari,et al. Transport Properties and Mechanical Features of Sulfonated Polyether Ether Ketone/Organosilica Layered Materials Nanocomposite Membranes for Fuel Cell Applications , 2020, Membranes.
[30] V. Baglio,et al. Advances in hybrid composite membranes engineering for high-performance direct methanol fuel cells by alignment of 2D nanostructures and a dual-layer approach , 2020 .
[31] S. Rowshanzamir,et al. Simultaneous improvement of ionic conductivity and oxidative stability of sulfonated poly(ether ether ketone) nanocomposite proton exchange membrane for fuel cell application , 2020, International Journal of Energy Research.
[32] C. Simari,et al. Nafion-based cation-exchange membranes for direct methanol fuel cells , 2020 .
[33] M. Karimi,et al. Recent approaches to improve Nafion performance for fuel cell applications: A review , 2019, International Journal of Hydrogen Energy.
[34] Y. Gogotsi,et al. Mechanically strong and electrically conductive multilayer MXene nanocomposites. , 2019, Nanoscale.
[35] M. Agostini,et al. A Novel Li+-Nafion-Sulfonated Graphene Oxide Membrane as Single Lithium-Ion Conducting Polymer Electrolyte for Lithium Batteries , 2019, The Journal of Physical Chemistry C.
[36] B. Cheng,et al. Constructing Amino-Functionalized Flower-Like MOFs Nanofibers in Sulfonated Poly(ether sulfone) Proton Exchange Membrane for Simultaneously Enhancing Interface Compatibility and Proton Conduction. , 2019, ACS applied materials & interfaces.
[37] V. Baglio,et al. Toward optimization of a robust low‐cost sulfonated‐polyethersulfone containing layered double hydroxide for PEM fuel cells , 2019, Journal of Applied Polymer Science.
[38] S. Panero,et al. Enhanced safety and galvanostatic performance of high voltage lithium batteries by using ionic liquids , 2019, Electrochimica Acta.
[39] Long Zhao,et al. Facile Preparation of EVOH-Based Amphoteric Ion Exchange Membrane Using Radiation Grafting Technique: A Preliminary Investigation on Its Application for Vanadium Redox Flow Battery , 2019, Polymers.
[40] Ahmad Baroutaji,et al. Comprehensive investigation on hydrogen and fuel cell technology in the aviation and aerospace sectors , 2019, Renewable and Sustainable Energy Reviews.
[41] Wan Ramli Wan Daud,et al. Additives in proton exchange membranes for low- and high-temperature fuel cell applications: A review , 2019, International Journal of Hydrogen Energy.
[42] S. Greenbaum,et al. Graphene oxide and sulfonated-derivative: Proton transport properties and electrochemical behavior of Nafion-based nanocomposites , 2019, Electrochimica Acta.
[43] M. Hamza,et al. Preparation, Microstructure and Morphology of Electrospun Sulfonated Polystyrene Films for Proton Exchange Membrane Hydrogen Fuel Cell , 2019, Energy Procedia.
[44] M. Vinothkannan,et al. Sulfonated poly ether sulfone/heteropoly acid composite membranes as electrolytes for the improved power generation of proton exchange membrane fuel cells , 2018, Composites Part B: Engineering.
[45] A. Abdolmaleki,et al. Metal-organic framework anchored sulfonated poly(ether sulfone) as a high temperature proton exchange membrane for fuel cells , 2018, Journal of Membrane Science.
[46] Yanlin Wang,et al. Fluorine-Containing Branched Sulfonated Polyimide Membrane for Vanadium Redox Flow Battery Applications , 2018, ChemElectroChem.
[47] Jonghee Han,et al. Polybenzimidazole (PBI-OO) based composite membranes using sulfophenylated TiO2 as both filler and crosslinker, and their use in the HT-PEM fuel cell , 2018, Journal of Membrane Science.
[48] Qian Yang,et al. Alkali-stable partially fluorinated poly(arylene ether) anion exchange membranes with a claw-type head for fuel cells , 2018 .
[49] Alpay Şahin,et al. The development of Speek/Pva/Teos blend membrane for proton exchange membrane fuel cells , 2018 .
[50] C. Simari,et al. A facile approach to fabricating organosilica layered material with sulfonic groups as an efficient filler for polymer electrolyte nanocomposites , 2017 .
[51] A. Aricò,et al. Reduced methanol crossover and enhanced proton transport in nanocomposite membranes based on clay−CNTs hybrid materials for direct methanol fuel cells , 2017, Ionics.
[52] Emmanuel P. Giannelis,et al. Nafion® nanocomposite membranes with enhanced properties at high temperature and low humidity environments , 2016 .
[53] D. Gournis,et al. Investigation of layered double hydroxide (LDH) Nafion-based nanocomposite membranes for high temperature PEFCs , 2015 .
[54] A. Aricò,et al. Sulfonated Graphene Oxide Platelets in Nafion Nanocomposite Membrane: Advantages for Application in Direct Methanol Fuel Cells , 2014 .
[55] B. Levenfeld,et al. Synthesis and characterization of polysulfone/ layered double hydroxides nanocomposite membranes for fuel cell application , 2014 .
[56] G. Portale,et al. A Critical Revision of the Nano‐Morphology of Proton Conducting Ionomers and Polyelectrolytes for Fuel Cell Applications , 2013 .
[57] Jooheon Kim,et al. The effect of sulfonated graphene oxide on Sulfonated Poly (Ether Ether Ketone) membrane for direct methanol fuel cells , 2013 .
[58] T. Zhao,et al. Synthesis and characterization of crosslinked poly (vinyl alcohol)/layered double hydroxide composite polymer membranes for alkaline direct ethanol fuel cells , 2012 .
[59] G. He,et al. SPEEK proton exchange membranes modified with silica sulfuric acid nanoparticles , 2012 .
[60] Dermot O'Hare,et al. Recent advances in the synthesis and application of layered double hydroxide (LDH) nanosheets. , 2012, Chemical reviews.
[61] Jedeok Kim,et al. High ionic conductivity of Mg–Al layered double hydroxides at intermediate temperature (100–200 °C) under saturated humidity condition (100% RH) , 2010 .
[62] Serdar Erkan,et al. Preparation and characterization of sulfonated polysulfone/titanium dioxide composite membranes for proton exchange membrane fuel cells , 2009 .
[63] I. Eroglu,et al. Effects of sulfonated polyether-etherketone (SPEEK) and composite membranes on the proton exchange membrane fuel cell (PEMFC) performance , 2009 .
[64] Tae Wook Kim,et al. Preparation and Characterization of Hybrid Hydrotalcite-Sulfonated Polyetheretherketone (SPEEK) Cation-Exchange Membranes , 2009 .
[65] G. Heinrich,et al. Intercalation of Mg–Al layered double hydroxide by anionic surfactants: Preparation and characterization , 2008 .
[66] K. Katti,et al. Why is nacre so tough and strong , 2006 .
[67] J. Nam,et al. Optimum ionic conductivity and diffusion coefficient of ion-exchange membranes at high methanol feed concentrations in a direct methanol fuel cell , 2006 .
[68] Youngkwan Lee,et al. Methanol and proton transport control by using layered double hydroxide nanoplatelets for direct methanol fuel cell , 2005 .
[69] M. Sahimi,et al. A study by in situ techniques of the thermal evolution of the structure of a Mg–Al–CO3 layered double hydroxide , 2002 .
[70] K. Kreuer. Proton Conductivity: Materials and Applications , 1996 .
[71] D. Longmore. The principles of magnetic resonance. , 1989, British medical bulletin.
[72] J. E. Tanner. Use of the Stimulated Echo in NMR Diffusion Studies , 1970 .