Standard time and frequency generation

The basic properties of atomic primary frequency standards are reviewed. A continuously running frequency source combined with counting, storage, and display devices results in a clock. Time scales are obtained by setting clocks with respect to a convenient origin. The accuracy of a primary frequency standard is a combined theoretical and experimental assessment of the uncertainties of all known possible sources of bias from the idealized definition. Recommended standard measures for the stability are the spectral density of fractional frequency fluctuations (frequency domain) and the two-sample no-dead time Allan variance (time domain). The operation of atomic frequency standards is based on various methods of particle interrogation to observe the transitions, particle confinement to obtain sufficient interaction time, and particle preparation to obtain the desired energy level populations. Passive resonator and active oscillator (maser) modes of operation are discussed; the former has some fundamental advantages. A review of the state of the art and current practice shows that cesium beam resonator standards have the best documented accuracy capability (5 × 10-13) and, in their commercial versions, are presently the best available clocks. There are three concepts related to time: time interval, date, and synchronization. In order to assign dates to events, time scales have to be established. The steadily growing need for a very precise and uniform time scale has resulted in a new internationally coordinated time scale, IAT. Frequency metrology will have increasing impact on both length and voltage metrology in the near future.

[1]  Claude Audoin,et al.  Discussion of Cavity Pulling in Passive Frequency Standards , 1971 .

[2]  T. J. Bennett,et al.  Miniaturized, Rapid Warm-Up, Rubidium Frequency Source , 1971 .

[3]  Daniel Kleppner,et al.  BROKEN ATOMIC BEAM RESONANCE EXPERIMENT , 1958 .

[4]  David W. Allan,et al.  An Intercomparison of Hydrogen and Cesium Frequency Standards , 1966 .

[5]  M. Skolnick,et al.  SATURATED NEON ABSORPTION INSIDE A 6238‐Å LASER , 1967 .

[6]  Koichi Shimoda,et al.  Further Aspects of the Theory of the Maser , 1956 .

[7]  R. Sydnor,et al.  Hydrogen Maser Frequency Standard , 1971 .

[8]  F. G. Major,et al.  ULTRAHIGH RESOLUTION $delta$F = 0, /+ -/1 ($sup 3$He)$sup +$ HFS SPECTRA BY AN ION-STORAGE COLLISION TECHNIQUE , 1966 .

[9]  Sergei G. Rautian,et al.  Interaction of an Atom with a Strong Electromagnetic Field with the Recoil Effect Taken into Consideration , 1969 .

[10]  A G Mungall,et al.  The Second Order Doppler Shift in Cesium Beam Atomic Frequency Standards , 1971 .

[11]  Kenneth M. Evenson,et al.  ABSOLUTE FREQUENCY MEASUREMENTS OF THE CO2 cw LASER AT 28 THz (10.6μm) , 1970 .

[12]  Donald B. Percival,et al.  The US Naval Observatory Clock Time Reference and the Performance of a Sample of Atomic Clocks , 1970 .

[13]  D. H. Throne.  A Report of the Performance Characteristics of a New Rubidium Vapor Frequency Standard , 1969 .

[14]  A. R. Chi,et al.  Optical Detection of Narrow Rb 87 Hyperfine Absorption Lines , 1958 .

[15]  Kenneth M. Evenson,et al.  HARMONIC MIXING OF MICROWAVE AND FAR‐INFRARED LASER RADIATION USING A JOSEPHSON JUNCTION , 1971 .

[16]  R. Novick,et al.  The optically pumped rubidium maser , 1966 .

[17]  R. F. Lacey,et al.  Short-term stability of passive atomic frequency standards , 1965 .

[18]  R. E. Beehler,et al.  Cesium Atomic Beam Frequency Standards: A Survey of Laboratory Standards Development from 1949-1971 , 1971 .

[19]  H Hellwig,et al.  The Hydrogen Storage Beam Tube, a Proposal for a New Frequency Standard* , 1970 .

[20]  Helmut Hellwig,et al.  Areas of Promise for the Development of Future Primary Frequency Standards , 1970 .

[21]  H. Dehmelt,et al.  Paramagnetic Resonance Reorientation of Atoms and Ions Aligned by Electron Impact , 1956 .

[22]  F K Harris,et al.  Accurate Hamon-Pair Potentiometer for Josephson Frequency-to-Voltage Measurements , 1970 .

[23]  R. L. Barger,et al.  Pressure shift and broadening of methane line at 3.39 mu studied by laser-saturated molecular absorption. , 1969 .

[24]  Helmut Hellwig,et al.  Frequency Stability of Methane‐Stabilized He–Ne Lasers , 1972 .

[25]  N. F. Ramsey.  History of Atomic and Molecular Control of Frequency and Time , 1971 .

[26]  D. W. Allan,et al.  Statistics of atomic frequency standards , 1966 .

[27]  R. Hyatt,et al.  Performance of Newly Developed Cesium Beam Tubes and Standards , 1971 .

[28]  Helmut Hellwig,et al.  Measurement of the Unperturbed Hydrogen Hyperfine Transition Frequency , 1970 .

[29]  D. Halford,et al.  High Quality Quartz Crystal Oscillators: Frequency Domain and Time Domain Stability , 1971 .

[30]  H. M. Smith.  International time and frequency coordination , 1972 .

[31]  D. J. Glaze,et al.  Improvements in Atomic Cesium Beam Frequency Standards at the National Bureau of Standards , 1970 .

[32]  David W. Allan,et al.  Comments on the October 1970 Metrologia Paper "The U.S. Naval Observatory Clock Time Reference and the Performance of a Sample of Atomic Clocks" , 1971 .