Sizing and Parametric Analysis of a Stand-Alone Photovoltaic Power Plant

A hybrid approach, combining analytical sizing equations with long-term performance, for an optimal design of a stand-alone photovoltaic (PV)-battery system is proposed in this paper. This study explicitly examines the interaction of hourly variation of the load on the energy supplied from a stand-alone PV-generating source keeping the system 100% reliable, and a modification is proposed in the sizing algorithm to include the effect of loading profile. The correctness of the methodology is validated using an experiment exercise and by comparing it with other existing models. An adaptive feedback iteration technique, for fast convergence, is presented to obtain the best optimum combination for PV-battery configuration. A parametric analysis is carried out to examine the effect of load duration and charge controller low-voltage disconnect (LVD) on system sizing. A significant reduction of system requirements, i.e., up to 14%, is observed when the load is operating between 6 a.m. and 12 p.m. For a given condition, the optimum LVD of the charge controller is reported to be 11.4 V. The results of this study will serve any PV design engineer to decide the optimum system requirements and charge controller settings without compromising system reliability.

[1]  J. Dunlop,et al.  Battery charge controller characteristics in photovoltaic systems , 1992, IEEE Aerospace and Electronic Systems Magazine.

[2]  L. Goel,et al.  A study on optimal sizing of stand-alone photovoltaic stations , 1998 .

[3]  P G Nikhil,et al.  An improved algorithm for photovoltaic system sizing , 2012 .

[4]  Giri Venkataramanan,et al.  Generation unit sizing and cost analysis for stand-alone wind, photovoltaic, and hybrid wind/PV systems , 1998 .

[5]  P. G. Nikhil,et al.  An improved simulation model for photovoltaic cell , 2011, 2011 International Conference on Electrical and Control Engineering.

[6]  D. Paul,et al.  Artificial Neural Network Modeling for Efficient Photovoltaic System Design , 2008, 2008 International Conference on Advanced Computer Theory and Engineering.

[7]  Soteris A. Kalogirou,et al.  Artificial intelligence techniques for sizing photovoltaic systems: A review , 2009 .

[8]  R. Posadillo,et al.  Approaches for developing a sizing method for stand-alone PV systems with variable demand , 2008 .

[9]  Tara C. Kandpal,et al.  Renewable energy technologies for irrigation water pumping in India: A preliminary attempt towards potential estimation , 2007 .

[10]  Tom Markvart,et al.  Stand-alone PV system design: Results using a new sizing approach , 2008 .

[11]  Louis L. Bucciarelli,et al.  Estimating loss-of-power probabilities of stand-alone photovoltaic solar energy systems , 1984 .

[12]  P. Siarry,et al.  Multiobjective Optimization: Principles and Case Studies , 2004 .

[13]  S. Catalanotti,et al.  An analytical method to determine the optimal size of a photovoltaic plant , 1984 .

[14]  R. Messenger,et al.  Photovoltaic Systems Engineering , 2018 .

[15]  A. Fragaki,et al.  SHORT COMMUNICATION: Does climate change affect the design of stand‐alone PV systems? , 2005 .

[16]  Miguel Ángel Egido,et al.  The sizing of stand alone PV-system: A review and a proposed new method , 1992 .

[17]  A. Louche,et al.  Autonomous photovoltaic systems: Influences of some parameters on the sizing: Simulation timestep, input and output power profile , 1996 .

[18]  Wei Zhou,et al.  Current status of research on optimum sizing of stand-alone hybrid solar–wind power generation systems , 2010 .

[19]  V. Cuomo,et al.  The design of photovoltaic plants: An optimization procedure , 1984 .

[20]  Ziyad M. Salameh,et al.  Methodology for optimally sizing the combination of a battery bank and PV array in a wind/PV hybrid system , 1996 .

[21]  Shin-Guang Chen An efficient sizing method for a stand-alone PV system in terms of the observed block extremes , 2012 .

[22]  Eleni Kaplani,et al.  Energy performance and degradation over 20 years performance of BP c-Si PV modules , 2011, Simul. Model. Pract. Theory.

[23]  Santiago Silvestre,et al.  Modelling Photovoltaic Systems Using PSpice®: Castaner/Modelling Photovoltaic Systems Using PSpice , 2006 .

[24]  Weidong Xiao,et al.  A novel modeling method for photovoltaic cells , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[25]  Moncef Jraidi,et al.  A battery ageing model used in stand alone PV systems , 2002 .

[26]  Weixiang Shen,et al.  Optimally sizing of solar array and battery in a standalone photovoltaic system in Malaysia , 2009 .