Phase behaviour, morphology and properties of poly(ether imide)/polyarylate blends

[1]  J. Eguiazábal,et al.  The Vicat softening temperature as a method to assess the phase behaviour of amorphous polymer blends , 1993 .

[2]  Guo Qipeng,et al.  Tensile properties of blends of poly(ether sulphone) with a poly(ether imide) , 1992 .

[3]  J. Eguiazábal,et al.  Phase behavior and mechanical properties of injection molded poly(ethylene terephthalate)/polyarylate blends , 1992 .

[4]  G. Groeninckx,et al.  Melt‐spinning of in‐situ composites of a thermotropic liquid crystalline polyester in a miscible matrix of poly(ether ether ketone) and poly(ether imide) , 1992 .

[5]  D. J. Hourston,et al.  The toughening of epoxy resins with thermoplastics: 1. Trifunctional epoxy resin-polyetherimide blends , 1992 .

[6]  A. Zaldua,et al.  Slit die flow measurements of a liquid crystalline polyesteramide and its blends with polyarylate , 1992 .

[7]  Li-Hui Wang,et al.  Compatibility and transesterification in binary polymer blends , 1992 .

[8]  J. Eguiazábal,et al.  Poly(butylene terephthalate)/phenoxy blends: Synergistic behavior in mechanical properties , 1991 .

[9]  J. Eguiazábal,et al.  Phase behaviour and mechanical properties of poly(ether ether ketone)-poly(ether sulphone) blends , 1991 .

[10]  F. E. Karasz,et al.  Thermal, dielectric, and mechanical relaxation in poly(benzimidazole)/poly(etherimide) blends , 1991 .

[11]  James L White,et al.  Characteristics of binary and ternary blends of poly (p‐phenylene sulfide) with poly(bis phenol A) sulfone and polyetherimide , 1991 .

[12]  I. Mondragon,et al.  Influence of migration of plasticizer during melt mixing on the transitions and properties of PC/CAB blends , 1990 .

[13]  L. Utracki,et al.  Polymer Alloys and Blends , 1990 .

[14]  L. Nicolais,et al.  Improvement of the processability of advanced polymers , 1990 .

[15]  P. N. Chen,et al.  Film and membrane properties of polybenzimidazole (PBI) and polyarylate alloys , 1990 .

[16]  B. D. Favis,et al.  Influence of composition on the morphology of polypropylene/polycarbonate blends , 1988 .

[17]  I. Mondragon,et al.  Mechanical behavior of polycarbonate/phenoxy blends before and after interchange reactions , 1988 .

[18]  L. Robeson,et al.  Miscible blends of poly(aryl ether ketone)s and polyetherimides , 1988 .

[19]  H. V. Oene,et al.  The phase behavior and mechanical properties of polyarylate and polycarbonate blends , 1987 .

[20]  J. W. Barlow,et al.  The importance of enthalpic interactions in polymeric systems , 1987 .

[21]  I. Mondragon,et al.  Control of interchange reactions of polycarbonate/polyarylate blends and their influence on physical behavior , 1986 .

[22]  J. Manson,et al.  Phase continuity and inversion in polymer blends and simultaneous interpenetrating networks , 1986 .

[23]  L. Robeson.  Phase behavior of polyarylate blends , 1985 .

[24]  I. Mondragon,et al.  Tensile properties of polyarylate‐polycarbonate blends , 1985 .

[25]  J. W. Barlow,et al.  Mechanical compatibilization of immiscible blends , 1984 .

[26]  M. Kimura,et al.  Blends of poly(butylene terephthalate) and a polyarylate before and after transesterification , 1983 .

[27]  J. W. Barlow,et al.  Polymer blends and alloys—a review of selected considerations , 1981 .

[28]  A. Yee,et al.  Mechanical properties of polymer mixtures: Effect of compatibility , 1980 .

[29]  F. E. Karasz,et al.  Modeling of tensile properties of polymer blends: PPO/poly(styrene‐co‐p‐chlorostyrene) , 1979 .

[30]  F. E. Karasz,et al.  Compatible glassy polyblends based upon poly(2,6‐dimethyl‐1,4‐phenylene oxide): Tensile modulus studies , 1979 .

[31]  F. E. Karasz,et al.  Compatibility of Poly(2,6-dimethyl-1,4-phenylene oxide) (PPO)/Poly(styrene-co-4-chlorostyrene) Blends. 1. Differential Scanning Calorimetry and Density Studies , 1978 .

[32]  A. Yee.  Mechanical properties of mixtures of two compatible polymers , 1977 .