3D printed eutectic aluminum alloy has facility for site-specific properties

[1]  S. Defanti,et al.  Boosting Productivity of Laser Powder Bed Fusion for AlSi10Mg , 2022, Journal of Manufacturing and Materials Processing.

[2]  Yan Chen,et al.  Strong yet ductile nanolamellar high-entropy alloys by additive manufacturing , 2022, Nature.

[3]  A. Plotkowski,et al.  On the high-temperature stability of the Al8Cu3Ce intermetallic in an additively manufactured Al-Cu-Ce-Zr alloy , 2022, Materials Characterization.

[4]  D. Leonard,et al.  Microstructural evolution and strengthening mechanisms in a heat-treated additively manufactured Al–Cu–Mn–Zr alloy , 2022, Materials Science and Engineering: A.

[5]  K. Sofinowski,et al.  Encoding Data into Metal Alloys Using Laser Powder Bed Fusion , 2022, Additive Manufacturing.

[6]  Yabo Liu,et al.  Microstructural evolution and characterization of AlSi10Mg alloy manufactured by selective laser melting , 2022, Journal of Materials Research and Technology.

[7]  A. Bower,et al.  Microstructural origin of the anisotropic flow stress of laser powder bed fused AlSi10Mg , 2021, Acta Materialia.

[8]  N. Takata,et al.  Control of microstructural characteristics and mechanical properties of AlSi12 alloy by processing conditions of laser powder bed fusion , 2021, Additive Manufacturing.

[9]  V. Paquit,et al.  A stochastic scan strategy for grain structure control in complex geometries using electron beam powder bed fusion , 2021 .

[10]  A. Plotkowski,et al.  Al-Cu-Ce(-Zr) alloys with an exceptional combination of additive processability and mechanical properties , 2021, Additive Manufacturing.

[11]  M. R. Hill,et al.  Residual stresses and microstructure within Allvac 718Plus laser powder bed fusion bars , 2021, Additive Manufacturing.

[12]  D. Leonard,et al.  Elevated temperature ductility dip in an additively manufactured Al-Cu-Ce alloy , 2021, Acta Materialia.

[13]  D. Raabe,et al.  Hierarchical crack buffering triples ductility in eutectic herringbone high-entropy alloys , 2021, Science.

[14]  S. Simunovic,et al.  Influence of Geometry on Columnar to Equiaxed Transition during Electron Beam Powder Bed Fusion of IN718 , 2021, Additive Manufacturing.

[15]  S. Liang,et al.  Residual stress modeling considering microstructure evolution in metal additive manufacturing , 2021 .

[16]  S. Babu,et al.  Towards high-temperature applications of aluminium alloys enabled by additive manufacturing , 2021, International Materials Reviews.

[17]  R. Setchi,et al.  Material-structure-performance integrated laser-metal additive manufacturing , 2021, Science.

[18]  H. Hyer,et al.  Process Optimization and Microstructure Analysis to Understand Laser Powder Bed Fusion of 316L Stainless Steel , 2021, Metals.

[19]  P. Withers,et al.  The effect of defect population on anisotropic fatigue resistance of selective laser melted AlSi10Mg alloy , 2021 .

[20]  Matteo Seita,et al.  Layer-wise engineering of grain orientation (LEGO) in laser powder bed fusion of stainless steel 316L , 2021 .

[21]  Yingang Liu,et al.  Uncovering the roles of LaB6-nanoparticle inoculant in the AlSi10Mg alloy fabricated via selective laser melting , 2021 .

[22]  G. Boussinot,et al.  Laser Powder Bed Fusion of Eutectic Al–Ni Alloys: Experimental and Phase-Field Studies , 2020 .

[23]  R. Dehoff,et al.  A defect-resistant Co–Ni superalloy for 3D printing , 2020, Nature Communications.

[24]  J. O. Milewski,et al.  Metallurgy, mechanistic models and machine learning in metal printing , 2020, Nature Reviews Materials.

[25]  Huajian Gao,et al.  Heterostructured materials: superior properties from hetero-zone interaction , 2020, Materials Research Letters.

[26]  Julio Cesar da Silva,et al.  Ultrafine eutectic Ti-Fe-based alloys processed by additive manufacturing – A new candidate for high temperature applications , 2020, Applied Materials Today.

[27]  A. Plotkowski,et al.  An additively manufactured AlCuMnZr alloy microstructure and tensile mechanical properties , 2020 .

[28]  Zhiheng Hu,et al.  Study of residual stress in selective laser melting of Ti6Al4V , 2020 .

[29]  O. Faruque,et al.  Effect of build orientation on the quasi-static and dynamic response of SLM AlSi10Mg , 2020 .

[30]  D. Raabe,et al.  High-strength Damascus steel by additive manufacturing , 2020, Nature.

[31]  X. Qi,et al.  Laser powder bed fusion of a near-eutectic Al–Fe binary alloy: Processing and microstructure , 2020 .

[32]  C. Körner,et al.  Fabrication of Single Crystals through a µ-Helix Grain Selection Process during Electron Beam Metal Additive Manufacturing , 2020, Metals.

[33]  Andrew A. Shapiro,et al.  Advances in additive manufacturing of metal-based functionally graded materials , 2020, International Materials Reviews.

[34]  M. Gibson,et al.  Additive manufacturing of ultrafine-grained high-strength titanium alloys , 2019, Nature.

[35]  A. Plotkowski,et al.  An adaptive integration scheme for heat conduction in additive manufacturing , 2019, Applied Mathematical Modelling.

[36]  Carolin Körner,et al.  Creep properties of single crystal Ni-base superalloys (SX): A comparison between conventionally cast and additive manufactured CMSX-4 materials , 2019, Materials Science and Engineering: A.

[37]  N. Klingbeil,et al.  The effect of process parameters on residual stress evolution and distortion in the laser powder bed fusion of Ti-6Al-4V , 2019, Additive Manufacturing.

[38]  Kaushik Chatterjee,et al.  Non-equilibrium microstructure, crystallographic texture and morphological texture synergistically result in unusual mechanical properties of 3D printed 316L stainless steel , 2019, Additive Manufacturing.

[39]  I. Todd,et al.  Additive manufacturing titanium components with isotropic or graded properties by hybrid electron beam melting/hot isostatic pressing powder processing , 2019, Scientific Reports.

[40]  D. Dunand,et al.  Strengthening mechanisms in Al Ni Sc alloys containing Al3Ni microfibers and Al3Sc nanoprecipitates , 2019, Acta Materialia.

[41]  D. Seidman,et al.  Effect of micro-additions of Ge, In or Sn on precipitation in dilute Al-Sc-Zr alloys , 2019, Materials Science and Engineering: A.

[42]  R. Misra,et al.  Role of melt pool boundary condition in determining the mechanical properties of selective laser melting AlSi10Mg alloy , 2019, Materials Science and Engineering: A.

[43]  C. Leinenbach,et al.  Effect of laser rescanning on the grain microstructure of a selective laser melted Al-Mg-Zr alloy , 2018, Materials Characterization.

[44]  D. Seidman,et al.  Microstructure and mechanical properties of a precipitation-strengthened Al-Zr-Sc-Er-Si alloy with a very small Sc content , 2018 .

[45]  Q. Pei,et al.  Controlling of residual stress in additive manufacturing of Ti6Al4V by finite element modeling , 2016 .

[46]  Ryan R. Dehoff,et al.  Site specific control of crystallographic grain orientation through electron beam additive manufacturing , 2015 .

[47]  W. King,et al.  An Experimental Investigation into Additive Manufacturing-Induced Residual Stresses in 316L Stainless Steel , 2014, Metallurgical and Materials Transactions A.

[48]  S. Wang,et al.  Characterization of stainless steel parts by Laser Metal Deposition Shaping , 2014 .

[49]  K. Higashi,et al.  First-principles studies on lattice constants and local lattice distortions in solid solution aluminum alloys , 2013 .

[50]  B. Muddle,et al.  Strengthening of an Al–Cu–Sn alloy by deformation-resistant precipitate plates , 2008 .

[51]  D Lawrence,et al.  In situ site-specific specimen preparation for atom probe tomography. , 2007, Ultramicroscopy.

[52]  D. Seidman,et al.  Criteria for developing castable, creep-resistant aluminum-based alloys – A review , 2006 .

[53]  N. Hansen,et al.  Hall–Petch relation and boundary strengthening , 2004 .

[54]  S. Hong,et al.  Generalized shear-lag model for load transfer in SiC/Al metal-matrix composites , 2003 .

[55]  David C. Dunand,et al.  Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al(Sc) alloys , 2002 .

[56]  S. David,et al.  Analysis of solidification microstructures in Fe-Ni-Cr single-crystal welds , 1990 .

[57]  Michael J. Aziz,et al.  Model for solute redistribution during rapid solidification , 1982 .

[58]  H. Zapolsky,et al.  Tracking the path of dislocations across ordered Al3Zr nano-precipitates in three dimensions , 2014 .

[59]  T. Watkins,et al.  RESIDUAL STRESS DETERMINATIONS USING PARALLEL BEAM OPTICS , 2003 .

[60]  J. M. Vitek,et al.  Correlation between solidification parameters and weld microstructures , 1989 .

[61]  K. Prewo,et al.  On the strength of discontinuous silicon carbide reinforced aluminum composites , 1986 .

[62]  A. Ardell,et al.  Precipitation hardening , 1985 .