HANDY: a device for assessing resistance to mechanical crushing of maize kernel

Background How to control the physical damage during maize kernel harvesting is a major problem for both mechanical designers and plant breeders. A limitation of addressing this problem is lacking a reliable method for assessing the relation between kernel damage susceptibility and threshing quality. The design, construction, and testing of a portable tool called “HANDY”, which can assess the resistance to mechanical crushing in maize kernel. HANDY can impact the kernel with a special accelerator at a given rotating speed and then cause measurable damage to the kernel. These factors are varied to determine the ideal parameters for operating the HANDY. Results Breakage index (BI, target index of HANDY), decreased as the moisture content of kernel increased or the rotating speed decreased within the tested range. Furthermore, the HANDY exhibited a greater sensitivity in testing kernels at higher moisture level influence on the susceptibility of damage kernel than that in Breakage Susceptibility tests, particularly when the centrifugation speed is about 1800 r/min and the centrifugal disc type is curved. Considering that the mechanical properties of kernels vary greatly as the moisture content changes, a subsection linear (average goodness of fit is 0.9) to predict the threshing quality is built by piecewise function analysis, which is divided by kernel moisture. Specifically, threshing quality is regarded as a function of the measured result of the HANDY. Five maize cultivars are identified with higher damage resistance among 21 tested candidate varieties. Conclusions The HANDY provides a quantitative assessment of the mechanical crushing resistance of maize kernel. The BI is demonstrated to be a more robust index than breakage susceptibility (BS) when evaluating threshing quality in harvesting in terms of both reliability and accuracy. This study also offers a new perspective for evaluating the mechanical crushing resistance of grains and provides technical support for breeding and screening maize varieties that are suitable for mechanical harvesting.

[1]  David S. Jackson,et al.  Classification and prediction of maize hardness-associated properties using multivariate statistical analyses , 2005 .

[2]  A. Reyneri,et al.  Prediction of the dry-milling performance of maize hybrids through hardness-associated properties. , 2013, Journal of the science of food and agriculture.

[3]  F. Kalkan,et al.  Correlation between the protein content and mechanical properties of wheat , 2012 .

[4]  Marcel Naumann,et al.  Cracking and fracture properties of potato (Solanum tuberosum L.) tubers and their relation to dry matter, starch, and mineral distribution. , 2019, Journal of the science of food and agriculture.

[5]  S. Mohtasebi,et al.  Effects of moisture content, loading rate, and grain orientation on fracture resistance of barley grain. , 2018 .

[6]  M. Paulsen,et al.  Physical, chemical, and dry-milling properties of corn of varying density and breakage susceptibility , 1992 .

[7]  Imran Ali Lakhiar,et al.  Mechanical strength of wheat grain varieties influenced by moisture content and loading rate , 2018 .

[8]  W. K. Bilanski.  Damage Resistance of Seed Grains , 1966 .

[9]  M. F. Finner,et al.  A Centrifugal Impacter for Damage Susceptibility Evaluation of Shelled Corn , 1983 .

[10]  M. FuLi,et al.  Dropping impact experiment on corn seeds. , 2009 .

[11]  Floyd M. Cunningham,et al.  Design Relationships for Centrifugal Fertilizer Distributors , 1967 .

[12]  J. Abecassis,et al.  Bread wheat milling behavior: effects of genetic and environmental factors, and modeling using grain mechanical resistance traits , 2017, Theoretical and Applied Genetics.

[13]  Mehari Z. Tekeste,et al.  Effect of grain moisture content on physical, mechanical, and bulk dynamic behaviour of maize , 2020 .

[14]  Publisher's Note , 2018, Anaesthesia.

[15]  Ajit K. Srivastava,et al.  Impact Parameters Related to Physical Damage to Corn Kernel , 1976 .

[16]  Shaokun Li,et al.  Effects of Grain Moisture Content on Mechanical Grain Harvesting Quality of Summer Maize , 2018 .

[17]  Frank W. Sosulski,et al.  Determination of the breakage susceptibility of lentil seeds , 1991 .

[18]  C. J. Peterson,et al.  Identification of genetic factors controlling kernel hardness and related traits in a recombinant inbred population derived from a soft × ‘extra-soft’ wheat (Triticum aestivum L.) cross , 2011, Theoretical and Applied Genetics.

[19]  Ravi Kiran,et al.  Naïve Bayes classifier, multivariate linear regression and experimental testing for classification and characterization of wheat straw based on mechanical properties , 2018 .

[20]  Yuan Su,et al.  Damage resistance and compressive properties of bulk maize kernels at varying pressing factors: Experiments and modeling , 2019, Journal of Food Process Engineering.

[21]  Michel Paindavoine,et al.  High Speed Stereovision Setup for Position and Motion Estimation of Fertilizer Particles Leaving a Centrifugal Spreader , 2014, Sensors.

[22]  M. G. Varnamkhasti,et al.  Effects of moisture content, seed size, loading rate and seed orientation on force and energy required for fracturing cumin seed (Cuminum cyminum Linn.) under quasi-static loading , 2008 .

[23]  O. Akyol,et al.  Age and growth of swordfish (Xiphias gladius L.) in the Aegean Sea , 2013, Turkish Journal of Zoology.

[24]  A. Rajabipour,et al.  Fracture resistance of wheat grain as a function of moisture content, loading rate and grain orientation. , 2010 .

[25]  Guangsheng Zhou,et al.  Physiological Mechanisms behind Differences in Pod Shattering Resistance in Rapeseed (Brassica napus L.) Varieties , 2016, PloS one.

[27]  Denis Miclet,et al.  Hybrid centrifugal spreading model to study the fertiliser spatial distribution and its assessment using the transverse coefficient of variation , 2017, Comput. Electron. Agric..

[28]  Charles R. Hurburgh,et al.  Prediction of Wisconsin Tester Breakage Susceptibility of Corn from Bulk Density and NIRS Measurements of Composition , 1994 .

[29]  Xiaomin He,et al.  MLR and experimental testing for characterization and classification of damage resistance of maize hybrids based on mechanical properties , 2019, Journal of Food Process Engineering.

[30]  J. A. Bartsch,et al.  Impact Damage to Soybean Seed , 1986 .