Experimental study of a suspended subsea module at different positions in the splash zone

[1]  T. Larsen,et al.  Experimental and numerical investigation of a jacket structure subject to steep and breaking regular waves , 2020 .

[2]  M. Ong,et al.  Splash zone lowering analysis of a large subsea spool piece , 2020 .

[3]  C. Swan,et al.  An experimental study of wave-in-deck loading and its dependence on the properties of the incident waves , 2020 .

[4]  Gang Xu,et al.  Water entry of a finite width wedge near a floating body , 2019, Applied Ocean Research.

[5]  Mohammad Saeed Derakhshanian,et al.  Experimental and numerical investigation for a reliable simulation tool for oblique water entry problems , 2018, Ocean Engineering.

[6]  S. Hong,et al.  Experimental and numerical study on mating operation of a topside module by a floating crane vessel in waves , 2018 .

[7]  Prateek Gupta.  Experimental Investigation of Porous Structures in Splash Zone , 2018 .

[8]  Ke Tang,et al.  A finite element based study on lowering operation of subsea massive structure , 2017 .

[9]  O. Gudmestad,et al.  Characteristics of the Wave Slamming Forces on Jacket Structures Under Plunging Breaking Waves Based on Experimental Data , 2017 .

[10]  Ming Liu,et al.  Experimental investigation of wave slamming on an open structure supported elastically , 2016 .

[11]  Rausa Heredia,et al.  Characterization of wave slamming forces for a truss structure within the framework of the WaveSlam project , 2015 .

[12]  Torgeir Moan,et al.  Analysis of lifting operation of a monopile for an offshore wind turbine considering vessel shielding effects , 2014 .

[13]  T. Næss,et al.  On the importance of slamming during installation of structures with large suction anchors , 2014 .

[14]  Odd M. Faltinsen,et al.  An experimental and numerical study of heave added mass and damping of horizontally submerged and perforated rectangular plates , 2013 .

[15]  Anders Selvåg,et al.  Wave Impact Forces on complex structures during lowering through the splash zone , 2013 .

[16]  Bernt J. Leira,et al.  Numerical and experimental studies of submerged towing of a subsea template , 2012 .

[17]  Bernard Molin,et al.  Hydrodynamique des Structures Offshore , 2012 .

[18]  F. Remy,et al.  Experimental and numerical study of the wave run-up along a vertical plate , 2010, Journal of Fluid Mechanics.

[19]  Ove T. Gudmestad,et al.  Splash Zone Lifting Analysis of Subsea Structures , 2010 .

[20]  Bing Ren,et al.  Experimental study of unidirectional irregular wave slamming on the three-dimensional structure in the splash zone , 2008 .

[21]  A. C. Fairlie-Clarke,et al.  An experimental investigation into the constant velocity water entry of wedge-shaped sections , 2008 .

[22]  Tim Bunnik,et al.  The Use of a Volume of Fluid (VOF) Method Coupled to a Time Domain Motion Simulation to Calculate the Motions of a Subsea Structure Lifted Through the Splash Zone , 2006 .

[23]  Subrata K. Chakrabarti,et al.  Handbook of Offshore Engineering , 2005 .

[24]  Bing Ren,et al.  Experimental study of irregular wave impact on structures in the splash zone , 2003 .

[25]  Yoshimi Goda,et al.  A COMPARATIVE REVIEW ON THE FUNCTIONAL FORMS OF DIRECTIONAL WAVE SPECTRUM , 1999 .