THE EFFECT OF UNDERCUT, MISALIGNMENT AND RESIDUAL STRESSES ON THE FATIGUE BEHAVIOUR OF BUTT WELDED JOINTS

— A mathematical model is developed to predict the effect of weld toe undercut, misalignment and residual stresses on the fatigue behaviour of butt welded joints subjected to zero-to-tensile loading. Linear Elastic Fracture Mechanics (LEFM), Finite Element Analysis (FEA) and superposition approaches have been used for the modelling. It has been found that an undercut at the toes of welded joints is one of the most important weld geometry parameters. The reduction of fatigue strength of welded joints with a weld toe undercut is at least twice that of joints without an undercut in comparison with flush-ground welded plate. A misalignment of 5% of plate thickness and an undercut of 2% of plate thickness are fairly representative for the lower boundary of S-N curves of butt joints. The improvement of fatigue limits by means of surface treatments is shown to be effective for both undercut and misaligned joints. This approach is practical for a “Fitness-for-Purpose” assessment of welded joints subject to fatigue conditions.