Inkjet Printing of Radio Frequency Electronics: Design Methodologies and Application of Novel Nanotechnologies

[1]  Darko Kirovski,et al.  An RFID system with enhanced hardware-enabled authentication and anti-counterfeiting capabilities , 2010, 2010 IEEE MTT-S International Microwave Symposium.

[2]  Darko Kirovski,et al.  RF Fingerprinting Physical Objects for Anticounterfeiting Applications , 2011, IEEE Transactions on Microwave Theory and Techniques.

[3]  M. Shikida,et al.  1.07 – Wet Etching , 2008 .

[4]  J. Seybold.  Introduction to RF Propagation , 2005 .

[5]  P. Ajayan,et al.  Direct laser writing of micro-supercapacitors on hydrated graphite oxide films. , 2011, Nature nanotechnology.

[6]  Constantine A. Balanis,et al.  Antenna Theory: Analysis and Design , 1982 .

[7]  Ying Xu,et al.  Multi-Walled Carbon Nanotube-Based Gas Sensor for NH3 Detection at Room Temperature , 2010, 2010 4th International Conference on Bioinformatics and Biomedical Engineering.

[8]  Yang Wang,et al.  Wireless sensing with smart skins , 2011, 2011 IEEE SENSORS Proceedings.

[9]  Li Yang,et al.  Integration of sensors and RFID's on ultra-low-cost paper-based substrates for wireless sensor networks applications , 2006, 2006 2nd IEEE Workshop on Wireless Mesh Networks.

[10]  M M Tentzeris.  “Inkjet-printed paper/polymer-based “green” RFID and wireless sensor nodes: The final step to bridge cognitive intelligence, nanotechnology and RF?” , 2010, 2010 IEEE International Conference on Wireless Information Technology and Systems.

[11]  K. Loh,et al.  Alkylamine capped metal nanoparticle "inks" for printable SERS substrates, electronics and broadband photodetectors. , 2011, Nanoscale.

[12]  Jerzy Krupka,et al.  Split post dielectric resonator technique for precise measurements of laminar dielectric specimens-measurement uncertainties , 2000, 13th International Conference on Microwaves, Radar and Wireless Communications. MIKON - 2000. Conference Proceedings (IEEE Cat. No.00EX428).

[13]  W. Stark,et al.  Graphene-stabilized copper nanoparticles as an air-stable substitute for silver and gold in low-cost ink-jet printable electronics , 2008, Nanotechnology.

[14]  V. Singh,et al.  MWCNT–polymer composites as highly sensitive and selective room temperature gas sensors , 2011, Nanotechnology.

[15]  Woo Y. Lee,et al.  Graphene supercapacitor electrodes fabricated by inkjet printing and thermal reduction of graphene oxide , 2011 .

[16]  George Shaker,et al.  Integrated antenna with inkjet-printed compact artificial magnetic surface for UHF applications , 2010, 2010 IEEE International Conference on Wireless Information Technology and Systems.

[17]  Murat Kiyak,et al.  Chemical etching of Cu-ETP copper , 2005 .

[18]  Ziyin Lin,et al.  Solvent-Assisted Thermal Reduction of Graphite Oxide , 2010 .

[19]  Li Yang,et al.  RFID Tag and RF Structures on a Paper Substrate Using Inkjet-Printing Technology , 2007, IEEE Transactions on Microwave Theory and Techniques.

[20]  Myeongkyu Lee,et al.  Comparative studies on thermal and laser sintering for highly conductive Cu films printable on plastic substrate , 2012 .

[21]  John S. Seybold.  Fading and Multipath Characterization , 2005 .

[22]  Manos M. Tentzeris,et al.  Battery-free RFID-enabled wireless sensors , 2010, 2010 IEEE MTT-S International Microwave Symposium.

[23]  E. Bekyarova,et al.  Mechanism of ammonia detection by chemically functionalized single-walled carbon nanotubes: in situ electrical and optical study of gas analyte detection. , 2007, Journal of the American Chemical Society.

[24]  Molecular motors: Watching how they work , 2011 .

[25]  Li Yang,et al.  Flexible LCP and Paper-based Substrates with Embedded Actives, Passives, and RFIDs , 2007, Polytronic 2007 - 6th International Conference on Polymers and Adhesives in Microelectronics and Photonics.

[26]  G. Marrocco,et al.  Passive ammonia sensor: RFID tag integrating carbon nanotubes , 2011, 2011 IEEE International Symposium on Antennas and Propagation (APSURSI).

[27]  V. Lakafosis,et al.  A novel graphene-based inkjet-printed WISP-enabled wireless gas sensor , 2012, 2012 42nd European Microwave Conference.

[28]  Kang L. Wang,et al.  High-speed graphene transistors with a self-aligned nanowire gate , 2010, Nature.

[29]  Li Yang,et al.  Inkjet Printed, Self Powered, Wireless Sensors for Environmental, Gas, and Authentication-Based Sensing , 2011, IEEE Sensors Journal.

[30]  Li Yang,et al.  Nanotechnology Enables Wireless Gas Sensing , 2011, IEEE Microwave Magazine.

[31]  Yoshihiro Kawahara,et al.  A battery-less, wireless mote for scavenging wireless power at UHF (470–570 MHz) frequencies , 2011, 2011 IEEE International Symposium on Antennas and Propagation (APSURSI).

[32]  V. Lakafosis,et al.  Paper-Based RFID-Enabled Wireless Platforms for Sensing Applications , 2009, IEEE Transactions on Microwave Theory and Techniques.

[33]  Joondong Kim,et al.  Fabrication of carbon nanotube sensor device by inkjet printing , 2008, 2008 3rd IEEE International Conference on Nano/Micro Engineered and Molecular Systems.

[34]  K. Moon,et al.  Ultrafast, dry microwave synthesis of graphene sheets , 2010 .

[35]  D. Pozar.  Microwave Engineering , 1990 .

[36]  G. Shaker,et al.  A novel highly-sensitive antenna-based “smart skin” gas sensor utilizing carbon nanotubes and inkjet printing , 2011, 2011 IEEE International Symposium on Antennas and Propagation (APSURSI).

[37]  Alanson P. Sample,et al.  Design of an RFID-Based Battery-Free Programmable Sensing Platform , 2008, IEEE Transactions on Instrumentation and Measurement.

[38]  R. Marks.  A multiline method of network analyzer calibration , 1991 .

[39]  Annick Loiseau,et al.  Gas sensors based on thick films of semi-conducting single walled carbon nanotubes , 2011 .

[40]  S. Beaupré,et al.  High-efficiency inverted solar cells based on a low bandgap polymer with excellent air stability , 2012 .

[41]  Manos M. Tentzeris,et al.  Design, integration and characterization of a novel paper-based wireless sensor module , 2008, 2008 IEEE MTT-S International Microwave Symposium Digest.