Modeling Early Injection Processes in HSDI Diesel Engines
暂无分享,去创建一个
[1] Peter J. O'Rourke,et al. A Spray/Wall Interaction Submodel for the KIVA-3 Wall Film Model , 2000 .
[2] Yoshinaka Takeda,et al. Emission Characteristics of Premixed Lean Diesel Combustion with Extremely Early Staged Fuel Injection , 1996 .
[3] C. Tropea,et al. Droplet-wall collisions: Experimental studies of the deformation and breakup process , 1995 .
[4] Rolf D. Reitz,et al. Premixed Compression Ignition (PCI) Combustion with Modeling-Generated Piston Bowl Geometry in a Diesel Engine , 2006 .
[5] Kinji Tsujimura,et al. An Experimental Study of Premixed Lean Diesel Combustion , 1999 .
[6] David L. Harrington,et al. A Review of Mixture Preparation and Combustion Control Strategies for Spark-Ignited Direct-Injection Gasoline Engines , 1997 .
[7] John Abraham,et al. Dependence of Fuel-Air Mixing Characteristics on Injection Timing in an Early-Injection Diesel Engine , 2002 .
[8] R. Reitz,et al. Modeling the Effects of Injector Nozzle Geometry on Diesel Sprays , 1999 .
[9] A. Yarin,et al. Impact of drops on solid surfaces: self-similar capillary waves, and splashing as a new type of kinematic discontinuity , 1995, Journal of Fluid Mechanics.
[10] Song-Charng Kong,et al. Numerical study of premixed HCCI engine combustion and its sensitivity to computational mesh and model uncertainties , 2003 .
[11] Kazutoshi Mori,et al. Premixed Compression Ignition (PCI) Combustion for Simultaneous Reduction of NOx and Soot in Diesel Engine , 2004 .
[12] L. Wachters,et al. The heat transfer from a hot wall to impinging water drops in the spheroidal state , 1966 .
[13] R. J. Kee,et al. Chemkin-II : A Fortran Chemical Kinetics Package for the Analysis of Gas Phase Chemical Kinetics , 1991 .
[14] R. Reitz,et al. Turbulence Modeling of Internal Combustion Engines Using RNG κ-ε Models , 1995 .
[15] Rolf D. Reitz,et al. Modeling Engine Spray/Wall Impingement , 1988 .
[16] Song-Charng Kong,et al. Modeling diesel spray flame lift-off, sooting tendency and NOx emissions using detailed chemistry , 2005 .
[17] R. Reitz,et al. A temperature wall function formulation for variable-density turbulent flows with application to engine convective heat transfer modeling , 1997 .
[18] Rolf D. Reitz,et al. Comparison of the Characteristic Time (CTC), Representative Interactive Flamelet (RIF), and Direct Integration with Detailed Chemistry Combustion Models against Optical Diagnostic Data for Multi-Mode Combustion in a Heavy-Duty DI Diesel Engine , 2006 .
[19] R. Reitz,et al. Development and Validation of a Reduced Reaction Mechanism for HCCI Engine Simulations , 2004 .
[20] Shuji Kimura,et al. Ultra - Clean Combustion Technology Combining a Low - Temperature and Premixed Combustion Concept fo , 2001 .
[21] R. Reitz,et al. Modeling the Effects of Fuel Spray Characteristics on Diesel Engine Combustion and Emission , 1998 .