Energy savings from direct-DC in U.S. residential buildings

Abstract An increasing number of energy-efficient appliances operate on direct current (DC) internally, offering the potential to use DC directly from renewable energy systems, thereby avoiding the energy losses inherent in converting power to alternating current (AC) and back. This paper investigates that potential for net-metered residences with on-site photovoltaics (PV) by modeling the net power draw of a ‘direct-DC house’ compared to that of a typical net-metered house with AC distribution, assuming identical DC-internal loads. The model comparisons were run for 14 cities in the United States, using hourly, simulated PV-system output and residential loads. The model tested the effects of climate and battery storage. A sensitivity analysis was conducted to determine how future changes in the efficiencies of power system components might affect potential energy savings. Based on this work, we estimate that net-metered PV residences could save 5% of their total electricity load for houses without storage and 14% for houses with storage. Direct-DC energy savings are sensitive to power system and appliance conversion efficiencies but are not significantly influenced by climate.

[1]  A. Sannino,et al.  Feasibility of a DC network for commercial facilities , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[2]  Per Heiselberg,et al.  Zero energy buildings and mismatch compensation factors , 2011 .

[3]  Fjo De Ridder,et al.  Electricity storage for grid-connected household dwellings with PV panels , 2010 .

[4]  Utilizing energy storage with PV for residential and commercial use , 2008, 2008 34th Annual Conference of IEEE Industrial Electronics.

[5]  Vagelis Vossos,et al.  Catalog of DC Appliances and Power Systems , 2012 .

[6]  Huey Pang,et al.  DC Electrical Distribution Systems in Buildings , 2006, 2006 2nd International Conference on Power Electronics Systems and Applications.

[7]  Henrik Lund,et al.  Excess electricity diagrams and the integration of renewable energy , 2003 .

[8]  Paul Denholm,et al.  Evaluating the limits of solar photovoltaics (PV) in electric power systems utilizing energy storage and other enabling technologies , 2007 .

[9]  Tero Kaipia,et al.  DC supply of low-voltage electricity appliances in residential buildings , 2009 .

[10]  D.J. Hammerstrom,et al.  AC Versus DC Distribution SystemsDid We Get it Right? , 2007, 2007 IEEE Power Engineering Society General Meeting.

[11]  L.M. Tolbert,et al.  AC vs. DC distribution: A loss comparison , 2008, 2008 IEEE/PES Transmission and Distribution Conference and Exposition.

[12]  Fabrice Locment,et al.  Building-integrated microgrid: Advanced local energy management for forthcoming smart power grid communication , 2013 .

[13]  Inês L. Azevedo,et al.  Edison Revisited: Should we use DC circuits for lighting in commercial buildings? , 2012 .

[14]  J. Stevens,et al.  A study of lead-acid battery efficiency near top-of-charge and the impact on PV system design , 1996, Conference Record of the Twenty Fifth IEEE Photovoltaic Specialists Conference - 1996.

[15]  Paul Denholm,et al.  Role of Energy Storage with Renewable Electricity Generation , 2010 .