A Simplified Thermal Model to Control the Energy Fluxes and to Improve the Performance of Buildings

Abstract The article describes an accurate and suitable simplified tool aimed at evaluating, controlling and managing heat energy fluxes in buildings. The focus is the development of a Resistance-Capacitance (RC) thermal model able to represent the envelope thermal inertia on an hourly time basis. The single RC module simulates the thermal response of a single opaque or transparent element of the envelope. Each module consists of 3 Resistances and 2 Capacitances and is connected to the other modules by thermal nodes and coupled to an air internal temperature node in order to obtain a realistic exemplification of the specific boundary conditions and gains distribution in the conditioned space. The differential balance equations in each node have been solved with an explicit numerical method using Modelica simulation tool. A monitoring campaign was carried out on an outdoor test cell in order to observe the real thermal dynamic behaviour and the real hourly energy needs. The results of the model have been compared with the experimental collected data. The results are presented in terms of temperatures and heating power hourly profiles and cumulative daily energy needs. Finally the Bland-Altmann plot has been used to verify the accuracy and the shortcomings of the proposed thermal model.

[1]  L. Petzold.  A description of dassl: a differential/algebraic system solver , 1982 .

[2]  Vasco Medici,et al.  Grey-box system identification of building thermal dynamics using only smart meter and air temperature data , 2015 .

[3]  Italo Meroni,et al.  An Open Source “Smart Lamp” for the Optimization of Plant Systems and Thermal Comfort of Offices , 2016, Sensors.

[4]  Piotr Michalak,et al.  The simple hourly method of EN ISO 13790 standard in Matlab/Simulink: A comparative study for the climatic conditions of Poland , 2014 .

[5]  K. M. Letherman.  A rational criterion for accuracy of modelling of periodic heat conduction in plane slabs , 1977 .

[6]  Paul Raftery,et al.  A review of methods to match building energy simulation models to measured data , 2014 .

[7]  Gilles Fraisse,et al.  Development of a simplified and accurate building model based on electrical analogy , 2002 .

[8]  William O'Brien,et al.  Modelling, Design, and Optimization of Net-Zero Energy Buildings , 2015 .

[9]  Luca Evangelisti,et al.  Energy Retrofit Strategies for Residential Building Envelopes: An Italian Case Study of an Early-50s Building , 2015 .

[10]  L. H. Hansen,et al.  Modelling the heat dynamics of a building using stochastic differential equations , 2000 .

[11]  Arun Kumar,et al.  A review on modeling and simulation of building energy systems , 2016 .

[12]  J M Bland,et al.  Statistical methods for assessing agreement between two methods of clinical measurement , 1986 .

[13]  Italo Meroni,et al.  Energy performance assessment with empirical methods: application of energy signature , 2015 .

[14]  Sousso Kelouwani,et al.  Comparison and Simulation of Building Thermal Models for Effective Energy Management , 2015 .

[15]  Morris Grenfell Davies,et al.  Optimum design of resistance and capacitance elements in modelling a sinusoidally excited building wall , 1983 .

[16]  Hilding Elmqvist,et al.  Modeling of multibody systems with the object-oriented modeling language Dymola , 1996 .

[17]  Kevin J. Kircher,et al.  On the lumped capacitance approximation accuracy in RC network building models , 2015 .

[18]  Toke Rammer Nielsen,et al.  Simple tool to evaluate energy demand and indoor environment in the early stages of building design , 2005 .

[19]  Steven K. Firth,et al.  Developing suitable thermal models for domestic buildings with Smart Home equipment , 2014 .

[20]  Geert Bauwens,et al.  Co-heating test: A state-of-the-art , 2014 .

[21]  Italo Meroni,et al.  Design and Development of nEMoS, an All-in-One, Low-Cost, Web-Connected and 3D-Printed Device for Environmental Analysis , 2015, Sensors.

[22]  Italo Meroni,et al.  Hourly Calculation Method of Air Source Heat Pump Behavior , 2016 .

[23]  Henrik Madsen,et al.  Identifying suitable models for the heat dynamics of buildings , 2011 .

[24]  Xiao Chen,et al.  Model predictive control for indoor thermal comfort and energy optimization using occupant feedback , 2015 .