Top-Gate Dry-Etching Patterned Polymer Thin-Film Transistors With a Protective Layer on Top of the Channel

Photolithographic and dry-etching processes are developed to pattern the organic semiconductor (OSC) layer for top-gate organic thin-film transistors (OTFTs). A fluorine polymer layer is used to protect the OSC surface from the patterning processes so that the common photoresist can be used. The ON/OFF-current ratios of the patterned OTFTs are improved by about one order of magnitude compared with that of unpatterned devices. However, it is shown that removing the polymer protective layer can cause degraded subthreshold behavior due to increased interface trap density at the semiconductor/dielectric interface. A process without removing the polymer protective layer is thus developed to address this issue, and is shown to be able to provide a reliable route to achieve patterned top-gate OTFTs with high ON/OFF-current ratio, small subthreshold swing, and negligible hysteresis.

[1]  George G. Malliaras,et al.  Hydrofluoroethers as Orthogonal Solvents for the Chemical Processing of Organic Electronic Materials , 2008 .

[2]  Jean-Paul Kleider,et al.  Electrical Properties of Amorphous Silicon Transistors and MIS‐Devices: Comparative Study of Top Nitride and Bottom Nitride Configurations , 1993 .

[3]  A. Yamano,et al.  V‐Shaped Organic Semiconductors With Solution Processability, High Mobility, and High Thermal Durability , 2013, Advanced materials.

[4]  Gui Yu,et al.  A stable solution-processed polymer semiconductor with record high-mobility for printed transistors , 2012, Scientific Reports.

[5]  Kris Myny,et al.  Patterning of organic thin film transistors by oxygen plasma etch , 2006 .

[6]  H. Sirringhaus,et al.  Conjugated‐Polymer‐Based Lateral Heterostructures Defined by High‐Resolution Photolithography , 2010 .

[7]  Seung Hyeon Jeong,et al.  A printed OTFT-backplane for AMOLED display , 2013 .

[8]  K. Guarini,et al.  High-Resolution Inkjet Printing of All-Polymer Transistor Circuits , 2009 .

[9]  Xiaojun Guo,et al.  Controlling the surface wettability of the polymer dielectric for improved resolution of inkjet-printed electrodes and patterned channel regions in low-voltage solution-processed organic thin film transistors , 2014 .

[10]  Y. Aoyagi,et al.  Direct observation of contact and channel resistance in pentacene four-terminal thin-film transistor patterned by laser ablation method , 2004 .

[11]  Jae Eun Jang,et al.  Reliable and Uniform Thin‐Film Transistor Arrays Based on Inkjet‐Printed Polymer Semiconductors for Full Color Reflective Displays , 2013, Advanced materials.

[12]  Henning Sirringhaus,et al.  Molecular origin of high field-effect mobility in an indacenodithiophene–benzothiadiazole copolymer , 2013, Nature Communications.

[13]  Xinliang Feng,et al.  Patterning of conjugated polymers for organic optoelectronic devices. , 2011, Small.