Microstructure and mechanical properties of Al-Mg-Si alloy fabricated by a short process based on sub-rapid solidification

[1]  B. Zhang,et al.  Enhancement of strength and electrical conductivity for a dilute Al-Sc-Zr alloy via heat treatments and cold drawing , 2019, Journal of Materials Science & Technology.

[2]  J. Embury,et al.  The effect of manganese on the microstructure and tensile response of an Al-Mg-Si alloy , 2019, Materials Science and Engineering: A.

[3]  Changlin Yang,et al.  Enhanced strength and ductility of A356 alloy due to composite effect of near-rapid solidification and thermo-mechanical treatment , 2019, Materials Science and Engineering: A.

[4]  P. Vullum,et al.  β- and δ-Al-Fe-Si intermetallic phase, their intergrowth and polytype formation , 2019, Journal of Alloys and Compounds.

[5]  H. Laurent,et al.  The punch speed influence on warm forming and springback of two Al-Mg-Si alloys , 2019, Journal of Manufacturing Processes.

[6]  Amauri Garcia,et al.  On an expression for the growth of secondary dendrite arm spacing during non-equilibrium solidification of multicomponent alloys: Validation against ternary aluminum-based alloys , 2018, Journal of Manufacturing Processes.

[7]  Dingfei Zhang,et al.  Strengthening mechanisms in magnesium alloys containing ternary I, W and LPSO phases , 2017, Journal of Materials Science & Technology.

[8]  L. Zhuang,et al.  Effect of Zn on microstructure, texture and mechanical properties of Al-Mg-Si-Cu alloys with a medium number of Fe-rich phase particles , 2017 .

[9]  J. Qin,et al.  Evolution of Fe–rich phases in Mg melt and a novel method for separating Al and Fe from Al–Si–Fe alloys , 2017 .

[10]  Bo Chen,et al.  Investigation of Solidification and Segregation Characteristics of Cast Ni-Base Superalloy K417G , 2016 .

[11]  Y. Birol,et al.  Processing of high strength EN AW 6082 forgings without a solution heat treatment , 2016 .

[12]  P. Grant,et al.  Evolution of Fe Bearing Intermetallics During DC Casting and Homogenization of an Al-Mg-Si Al Alloy , 2016, Metallurgical and Materials Transactions A.

[13]  J. Schoenung,et al.  Coupling of dislocations and precipitates: Impact on the mechanical behavior of ultrafine grained Al–Zn–Mg alloys , 2016 .

[14]  Qing Liu,et al.  Optimization of the pre-aging treatment for an AA6022 alloy at various temperatures and holding times , 2015 .

[15]  R. Bjørge,et al.  Microstructure evolution and mechanical behavior of a binary Al–7Mg alloy processed by equal-channel angular pressing , 2015 .

[16]  A. Zielińska-Lipiec,et al.  The influence of rapid solidification on the microstructure of the 17Cr–9Ni–3Mo precipitation hardened steel , 2014 .

[17]  J. Hirsch,et al.  Superior light metals by texture engineering: Optimized aluminum and magnesium alloys for automotive applications , 2013 .

[18]  H. J. Zhang,et al.  Improving mechanical properties and corrosion resistance of Mg6ZnMn magnesium alloy by rapid solidification , 2013 .

[19]  D. Malakhov,et al.  The Sequence of Intermetallics Formation during the Solidification of an Al-Mg-Si Alloy Containing La , 2011 .

[20]  E. Sjölander,et al.  The heat treatment of Al–Si–Cu–Mg casting alloys , 2010 .

[21]  J. Walmsley,et al.  Deformation Structures of Pure Titanium during Shear Deformation , 2010 .

[22]  Y. Birol.  Analysis of macro segregation in twin-roll cast aluminium strips via solidification curves , 2009 .

[23]  S. Cockcroft,et al.  Research on microstructures of sub-rapidly solidified AZ61 Magnesium Alloy , 2009 .

[24]  W. K. Wang,et al.  Characterization of Al–Si–Mg alloys fast quenched from the melt by special medium , 2007 .

[25]  Kenta Suzuki,et al.  Mechanical properties of 6022 aluminum alloy sheets with high iron content fabricated by a high-speed twin-roll caster , 2007 .

[26]  L. Katgerman,et al.  Experimental study of structure formation in binary Al–Cu alloys at different cooling rates , 2005 .

[27]  Peter D. Lee,et al.  A technique for characterizing microsegregation in multicomponent alloys and its application to single-crystal superalloy castings , 2005 .

[28]  N. Hansen,et al.  Hall–Petch relation and boundary strengthening , 2004 .

[29]  S. Murtha,et al.  Alloy 6022-T4E29 for Automotive Sheet Applications , 2002 .

[30]  A. Bakker.  Mechanical Behaviour of Materials , 1995 .

[31]  H. Baker,et al.  Alloy phase diagrams , 1992 .

[32]  Joseph R. Davis.  Properties and selection : nonferrous alloys and special-purpose materials , 1990 .

[33]  A. L. Greer,et al.  Modelling of crystal growth and solute redistribution during rapid solidification , 1988 .

[34]  Michael J. Aziz,et al.  Model for solute redistribution during rapid solidification , 1982 .

[35]  Ian J. Polmear,et al.  Light Alloys: Metallurgy of the Light Metals , 1982 .