The effect of billets extruded by a curved and flat-face die on the semisolid characteristics and tensile properties of thixoformed products

[1]  C. Kang,et al.  Coarsening of equiaxed microstructure in the semisolid state of aluminum 7075 alloy through SIMA processing , 2012, Journal of Materials Science.

[2]  C. Kang,et al.  Correlation between solid fraction and tensile properties of semisolid RAP processed aluminum alloys , 2012 .

[3]  Y. Birol Thixoforming of EN AW-2014 alloy at high solid fraction , 2011 .

[4]  C. Kang,et al.  Study on the effects of the compression ratio and mushy zone heating on the thixotropic microstructure of AA 7075 aluminum alloy via SIMA process , 2011 .

[5]  S. Shabestari,et al.  Effect of plastic deformation and semisolid forming on iron–manganese rich intermetallics in Al–8Si–3Cu–4Fe–2Mn alloy , 2010 .

[6]  H. Maier,et al.  Characterization of grain microstructure development in the aluminum alloy EN AW-6060 during extrusion , 2010 .

[7]  A. Boostani,et al.  Microstructure and mechanical properties of A356 thixoformed alloys in comparison with gravity cast ones using new criterion , 2010 .

[8]  R. Bigot,et al.  Thermal exchange effects on steel thixoforming processes , 2010 .

[9]  Yi Sun,et al.  Microstructure evolution of AM60 magnesium alloy semisolid slurry prepared by new SIMA , 2010 .

[10]  H. Atkinson,et al.  Recrystallisation in the Semi-Solid State in 7075 Aluminium Alloy , 2008 .

[11]  Chung-Gil Kang,et al.  The effect of injection velocity on liquid segregation and mechanical properties in arm part fabricated by semi-solid die casting process , 2006 .

[12]  Helen V. Atkinson,et al.  Modelling the semisolid processing of metallic alloys , 2005 .

[13]  H. Aashuri Globular structure of ZA27 alloy by thermomechanical and semi-solid treatment , 2005 .

[14]  P. Seo,et al.  Determination of Die Design Rules for Semi-Solid Die Casting Process and Its Experimental Investigation , 2005 .

[15]  H. Atkinson,et al.  Thixoforming 7075 aluminium alloys , 2005 .

[16]  S. Youn,et al.  Horizontal reheating of aluminum alloys and semi-solid casting for a near net shape compressor component , 2003 .

[17]  Sang-yong Lee,et al.  Thixoforming characteristics of thermo-mechanically treated AA 6061 alloy for suspension parts of electric vehicles , 2002 .

[18]  Young-Ho Jung,et al.  Finite element simulation of die design for hot extrusion process of Al/Cu clad composite and its experimental investigation , 2002 .

[19]  Z. Fan,et al.  Semisolid metal processing , 2002 .

[20]  Chung-Gil Kang,et al.  Die design optimization for axisymmetric hot extrusion of metal matrix composites , 2001 .

[21]  P. J. Ward,et al.  Near net shaping by semi-solid metal processing , 2000 .

[22]  C. Kang,et al.  Effects of hot extrusion through a curved die on the mechanical properties of SiCp/Al composites fabricated by melt-stirring , 1999 .

[23]  Raghavan Srinivasan,et al.  Extrusion through controlled strain rate dies , 1990 .

[24]  C. Kang,et al.  A study on semisolid processing of A356 aluminum alloy through vacuum-assisted electromagnetic stirring , 2012 .

[25]  T. Ishikawa,et al.  Effect of extrusion conditions on metal flow and microstructures of aluminum alloys , 2006 .

[26]  Merton C. Flemings,et al.  Behavior of metal alloys in the semisolid state , 1991 .