Investigation on crystallization of TiO2–water nanofluids and deionized water

Two titania–water (TiO2–water) nanofluids were prepared by dispersing TiO2 nanoparticles in rod shapes (rutile TiO2) and in spherical shapes (anatase TiO2) into deionized water. The effect of the TiO2 nanoparticles on the crystallization behaviors of the nanofluids were investigated using differential scanning calorimetry (DSC). The weight fraction of the TiO2 nanoparticles was 0.05%, 0.30% and 0.70%. The experimental results show that in the cooling rate range of 1.5–9.0°C/min, the nanofluids with rutile TiO2 nanoparticles had higher crystallization temperatures compared with deionized water and the nanofluids with anatase TiO2 nanoparticles, and the heat of crystallization of the rutile TiO2 nanofluid was larger than that of the anatase TiO2 nanofluid. It is found that the rutile TiO2 nanofluid is more suitable than the anatase TiO2 nanofluid for ice storage system under the experimental conditions. Moreover, some unexpected data were obtained, which show that the shapes of the crystallization temperature curves of the nanofluids were like symbols of inverse “N” at 0.5–9.0°C/min, and that the crystallization temperatures of some of the nanofluids were lower than that of the deionized water at low cooling rates. The mechanisms for the unusual phenomenon were discussed.

[1]  Gianpiero Colangelo,et al.  A new solution for reduced sedimentation flat panel solar thermal collector using nanofluids , 2013 .

[2]  E. Afoakwa,et al.  Characterization of melting properties in dark chocolates from varying particle size distribution and composition using differential scanning calorimetry , 2008 .

[3]  Savvas A. Tassou,et al.  Characterization and experimental investigation of phase change materials for chilled food refrigerated cabinet applications , 2013 .

[4]  A. Mujumdar,et al.  Heat transfer characteristics of nanofluids: a review , 2007 .

[5]  Sheng‐Qi Zhou,et al.  Measurement of the specific heat capacity of water-based Al2O3 nanofluid , 2008 .

[6]  Nobuo Nakahara,et al.  Studies on thermal characteristics of ice thermal storage tank and a methodology for estimation of tank efficiency , 2008 .

[7]  K. Leong,et al.  Enhanced thermal conductivity of TiO2—water based nanofluids , 2005 .

[8]  S. D. Pohekar,et al.  Performance enhancement in latent heat thermal storage system: A review , 2009 .

[9]  Eun-Pil Kim,et al.  Experimental study on freezing of water with supercooled region in a horizontal cylinder , 2001 .

[10]  Jung-Chang Wang,et al.  Analysis of suspension and heat transfer characteristics of Al2O3 nanofluids prepared through ultrasonic vibration , 2011 .

[11]  The solidification phenomenon of the supercooled water containing solid particles , 2001 .

[12]  Xiang‐Yang Liu.  Heterogeneous nucleation or homogeneous nucleation , 2000 .

[13]  J. N. Hay,et al.  ISOTHERMAL CRYSTALLIZATION KINETICS AND MELTING BEHAVIOR OF POLY (ETHYLENE TEREPHTHALATE) , 2001 .

[14]  Xing Zhang,et al.  Effective thermal conductivity and thermal diffusivity of nanofluids containing spherical and cylindrical nanoparticles , 2006 .

[15]  K. Leong,et al.  Investigations of thermal conductivity and viscosity of nanofluids , 2008 .

[16]  O. Mahian,et al.  Experimental studies on the viscosity of TiO2 and Al2O3 nanoparticles suspended in a mixture of ethylene glycol and water for high temperature applications , 2013 .