A review of friction stir welding of aluminium matrix composites

As a solid state joining process, friction stir welding (FSW) has proven to be a promising approach for joining aluminium matrix composites (AMCs). However, challenges still remain in using FSW to join AMCs even with considerable progress having been made in recent years. This review paper provides an overview of the state of-the-art of FSW of AMC materials. Specific attention and critical assessment have been given to: (a) the macrostructure and microstructure of AMC joints, (b) the evaluation of mechanical properties of joints, and (c) the wear of FSW tools due to the presence of reinforcement materials in aluminium matrices. This review concludes with recommendations for future research directions.

[1]  Clifford C. Bampton,et al.  Challenges to developing and producing MMCs for space applications , 2001 .

[2]  Q. Wang,et al.  Evolution of the Microstructure and Strength in the Nugget Zone of Friction Stir Welded SiCp/Al–Cu–Mg Composite , 2014 .

[3]  Lorella Ceschini,et al.  Effect of friction stir welding on microstructure, tensile and fatigue properties of the AA7005/10 vol.%Al2O3p composite , 2007 .

[4]  C. Poletti,et al.  Friction Stir Welding of Aluminum Metal Matrix Composite Containers for Electric Components , 2014 .

[5]  B. Xiao,et al.  Tensile properties and strain-hardening behaviour of friction stir welded SiCp/AA2009 composite joints , 2014 .

[6]  R. Kaibyshev,et al.  Effect of Friction Stir Welding on Microstructure of a 5024 Alloy , 2016 .

[7]  Alexander Von Strombeck,et al.  Friction stir welding of an AA6061/Al2O3/20p reinforced alloy , 2006 .

[8]  G. Cook,et al.  A Comparative Evaluation of the Wear Resistance of Various Tool Materials in Friction Stir Welding of Metal Matrix Composites , 2013, Journal of Materials Engineering and Performance.

[9]  Cem Celal Tutum,et al.  Numerical optimisation of friction stir welding: Review of future challenges , 2011 .

[10]  L. Ceschini,et al.  Fatigue properties of friction stir welded particulate reinforced aluminium matrix composites , 2010 .

[11]  Manas Mohan Mahapatra,et al.  Influence of tool geometries and process variables on friction stir butt welding of Al–4.5%Cu/TiC in situ metal matrix composites , 2014 .

[12]  Mario Rosso,et al.  Ceramic and metal matrix composites: Routes and properties , 2006 .

[13]  I. Dinaharan,et al.  Characterization of friction stir welded boron carbide particulate reinforced AA6061 aluminum alloy stir cast composite , 2014 .

[14]  P. Wanjara,et al.  Review of tools for friction stir welding and processing , 2012 .

[15]  B. Xiao,et al.  Residual stresses and high cycle fatigue properties of friction stir welded SiCp/AA2009 composites , 2013 .

[16]  P. Cavaliere,et al.  Friction Stir Welding of Ceramic Particle Reinforced Aluminium Based Metal Matrix Composites , 2004 .

[17]  J. W. Kaczmar,et al.  The production and application of metal matrix composite materials , 2000 .

[18]  Lawrence E Murr,et al.  Characterization of tool wear and weld optimization in the friction-stir welding of cast aluminum 359+20% SiC metal-matrix composite , 2004 .

[19]  Q. Wang,et al.  Friction stir welding of SiCp/2009Al composite plate , 2013 .

[20]  Lawrence E Murr,et al.  Tool wear in the friction-stir welding of aluminum alloy 6061 + 20% Al2O3: A preliminary study , 2001 .

[21]  William J. Arbegast,et al.  Friction stir welding after a decade of development , 2006 .

[22]  A. Pirondi,et al.  Analysis of crack propagation resistance of Al–Al2O3 particulate-reinforced composite friction stir welded butt joints , 2009 .

[23]  E. Cerri,et al.  Friction Stir Welding of Ceramic Particle Reinforced Aluminium Based Metal Matrix Composites , 2004 .

[24]  L. Murr,et al.  Shape optimization for tool wear in the friction-stir welding of cast AI359-20% SiC MMC , 2002 .

[25]  P. Threadgill,et al.  PROGRESS IN JOINING OF ADVANCED MATERIALS , 1991 .

[26]  M. Sharifitabar,et al.  Microstructure and mechanical properties of friction stir welded Al/Mg 2Si metal matrix cast composite , 2011 .

[27]  Y. Bozkurt,et al.  Experimental Investigation and Prediction of Mechanical Properties of Friction Stir Welded Aluminium Metal Matrix Composite Plates , 2012 .

[28]  Role of friction stir welding parameters on tensile strength of AA6061–B4C composite joints , 2013 .

[29]  K. S. Sucitharan,et al.  An Overview on Development of Aluminium Metal Matrix Composites with Hybrid Reinforcement , 2012 .

[30]  M. Ellis.  Joining of aluminium based metal matrix composites , 1996 .

[31]  S. Rawal.  Metal-matrix composites for space applications , 2001 .

[32]  V. Balasubramanian,et al.  Multi-objective optimization of friction stir welding parameters using desirability approach to join Al/SiCp metal matrix composites , 2013 .

[33]  Z. Zhang,et al.  Friction Stir Welding of SiCp/Al Composite and 2024 Al Alloy , 2010 .

[34]  M. Almomani,et al.  Effect of Processing Parameters on Friction Stir Welded Aluminum Matrix Composites Wear Behavior , 2012 .

[35]  K. Suryanarayanan,et al.  Silicon Carbide Reinforced Aluminium Metal Matrix Composites for Aerospace Applications: A Literature Review , 2013 .

[36]  V. Kannan,et al.  Friction Stir Welding of Aluminium Alloys , 2017 .

[37]  N. Murugan,et al.  Influence of tool pin profile on the metallurgical and mechanical properties of friction stir welded Al–10 wt.% TiB2 metal matrix composite , 2010 .

[38]  B. Ashok Kumar,et al.  Optimization of friction stir welding process parameters to maximize tensile strength of stir cast AA6061-T6/AlNp composite , 2014 .

[39]  V. Balasubramanian,et al.  Effect of Heat Input on Mechanical and Metallurgical Properties of Friction Stir Welded AA6061-10% SiCp MMCs , 2012, Journal of Materials Engineering and Performance.

[40]  G. Çam,et al.  Friction stir welded structural materials: beyond Al-alloys , 2011 .

[41]  S. C. Chen,et al.  Electron and laser beam welding of high strain rate superplastic Al-6061/SiC composites , 2001 .

[42]  W. M. Thomas,et al.  Friction Stir Welding Tools and Developments , 2003 .

[43]  Lawrence E Murr,et al.  Self-optimization in tool wear for friction-stir welding of Al 6061+20% Al2O3 MMC , 2003 .

[44]  B. Kumar,et al.  Prediction of tensile strength of friction stir welded stir cast AA6061-T6/AlNp composite , 2013 .

[45]  E. E. Bloom,et al.  Fusion and friction stir welding of aluminum-metal-matrix composites , 2005 .

[46]  J. F. Lancaster,et al.  Metallurgy of Welding , 1980 .

[47]  W. M. Thomas,et al.  Friction Stir Butt Welding , 1991 .

[48]  B. Xiao,et al.  Effect of microstructural evolution on mechanical properties of friction stir welded AA2009/SiCp composite , 2008 .

[49]  Structural Steels,et al.  Welding Metallurgy of , 1987 .

[50]  I. Dinaharan,et al.  Optimization of friction stir welding process to maximize tensile strength of AA6061/ZrB2 in-situ composite butt joints , 2012, Metals and Materials International.

[51]  I. Dinaharan,et al.  Effect of friction stir welding on microstructure, mechanical and wear properties of AA6061/ZrB2 in situ cast composites , 2012 .

[52]  R. Miranda,et al.  Process Developments and Materials Characterization in FSW/P , 2022 .

[53]  L. Ceschini,et al.  Microstructure, tensile and fatigue properties of AA6061/20 vol.%Al2O3p friction stir welded joints , 2007 .

[54]  A. Pirondi,et al.  Fracture and fatigue crack growth behaviour of PMMC friction stir welded butt joints , 2008 .

[55]  Joseph R. Davis,et al.  Special Features of Structure Formation and Properties of Special High-Alloy Alloys of the Al – Si – Cu System , 2023, Metal Science and Heat Treatment.

[56]  P. Rey,et al.  Friction stir welding of thick plates of aluminum alloy matrix composite with a high volume fraction of ceramic reinforcement , 2013 .

[57]  Belete Sirahbizu Yigezu,et al.  On friction stir butt welding of Al + 12Si/10 wt%TiC in situ composite , 2014 .

[58]  Tracie Prater,et al.  Friction Stir Welding of Metal Matrix Composites for use in aerospace structures , 2014 .

[59]  Q. Wang,et al.  Achieving friction stir welded SiCp/Al-Cu-Mg composite joint of nearly equal strength to base material at high welding speed , 2014 .

[60]  Y. Bozkurt,et al.  Microstructure and mechanical properties of friction stir welded particulate reinforced AA2124/SiC/25p–T4 composite , 2011 .

[61]  G. Mathers.  The welding of aluminium and its alloys , 2002 .

[62]  T. Qasim,et al.  Effect of Pin Profile on Friction Stir Welded Aluminum Matrix Composites , 2012 .

[63]  B. Xiao,et al.  Influence of microstructural evolution on tensile properties of friction stir welded joint of rolled SiCp/AA2009-T351 sheet , 2013 .

[64]  H. Bhadeshia,et al.  Review: Friction stir welding tools , 2011 .

[65]  P. Gougeon,et al.  Microstructure and mechanical properties of friction stir welded AA6063–B4C metal matrix composites , 2009 .