A Practical Approach for Core Loss Estimation of a High-Current Gapped Inductor in PWM Converters With a User-Friendly Loss Map

Core loss estimation of filter inductors is increasingly important for modeling and optimizing high-frequency, high-efficiency, and high-density pulsewidth modulation (PWM) power electronic converters. However, data provided by inductor core manufacturers are insufficient for core loss estimation in PWM converters, particularly in the case of customized gapped inductors. This paper presents a whole process of characterizing and estimating the core loss of a customized high-current gapped inductor for PWM converters. To excite the inductor for the B–H loop measurement, a test circuit formed by a half-bridge structure is proposed, which has the ability to compensate the asymmetric rectangular voltage on the inductor caused by the device voltage drops. To overcome the other challenges raised by a high excitation current, a refined discontinuous test procedure, triple pulse test, is proposed to reduce the requirements of the high-current test setup (thermal stress, current–time stress for current probes, capacity of dc sources, etc.). For practical purposes, a user-friendly loss map approach is proposed involving only time-domain and electrical variables to replace magnetic variables to enable the straightforward loss mapping process and core loss calculations. Presented experimental results show consistency between the estimated inductor loss and measured values. Overall, the proposed testing approach can be easily implemented on the user's side to develop a loss map of a given inductor. The established core loss map enables the users to accurately and rapidly estimate the core loss of a tested inductor for given PWM waveforms.

[1]  Toshihisa Shimizu,et al.  Iron loss eveluation of filter inductor used in PWM inverters , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[2]  Frede Blaabjerg,et al.  A Practical Core Loss Model for Filter Inductors of Power Electronic Converters , 2018, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[3]  Charles R. Sullivan,et al.  Core loss predictions for general PWM waveforms from a simplified set of measured data , 2010, 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[4]  R. D. De Doncker,et al.  Calculation of losses in ferro- and ferrimagnetic materials based on the modified Steinmetz equation , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[5]  Kazuhiro Umetani,et al.  Improvement of saturation property of iron powder core by flux homogenizing structure , 2013 .

[6]  Toshihisa Shimizu,et al.  A Practical Iron Loss Calculation for AC Filter Inductors Used in PWM Inverters , 2009, IEEE Transactions on Industrial Electronics.

[7]  Charles R. Sullivan.  High frequency core and winding loss modeling , 2013, 2013 International Electric Machines & Drives Conference.

[8]  Fred C. Lee,et al.  New core loss measurement method for high frequency magnetic materials , 2014, 2010 IEEE Energy Conversion Congress and Exposition.

[9]  U. Drofenik,et al.  PWM Converter Power Density Barriers , 2007, 2007 Power Conversion Conference - Nagoya.

[10]  J. Muhlethaler,et al.  Modeling and multi-objective optimization of inductive power components , 2012 .

[11]  Andrew J. Forsyth,et al.  Evaluation of SiC BJTs for High-Power DC–DC Converters , 2014, IEEE Transactions on Power Electronics.

[12]  J. Kolar,et al.  Optimal inductor design for 3-phase voltage-source PWM converters considering different magnetic materials and a wide switching frequency range , 2014, 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA).

[13]  S. Iyasu,et al.  A novel iron loss calculation method on power converters based on dynamic minor loop , 2005, 2005 European Conference on Power Electronics and Applications.

[14]  C.R. Sullivan,et al.  Improved calculation of core loss with nonsinusoidal waveforms , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[15]  Charles R. Sullivan,et al.  Testing Core Loss for Rectangular Waveforms, Phase II Final Report , 2011 .

[16]  A. Forsyth,et al.  High-Frequency Gap Losses in Nanocrystalline Cores , 2017, IEEE Transactions on Power Electronics.

[17]  John H. Harris,et al.  Testing Core Loss for Rectangular Waveforms February 7 , 2010 , 2010 .

[18]  Johann W. Kolar,et al.  η-ρ Pareto optimization of 3-phase 3-level T-type AC-DC-AC converter comprising Si and SiC hybrid power stage , 2014, 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA).

[19]  T. Shimizu,et al.  Iron loss calculation of AC filter inductor for three phase PWM inverter , 2012, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).

[20]  J. Kolar,et al.  Core losses under DC bias condition based on Steinmetz parameters , 2010, The 2010 International Power Electronics Conference - ECCE ASIA -.

[21]  J. W. Kolar,et al.  Improved Core-Loss Calculation for Magnetic Components Employed in Power Electronic Systems , 2012, IEEE Transactions on Power Electronics.

[22]  Toshihisa Shimizu,et al.  Novel iron loss calculation model for AC filter inductor on PWM inverter , 2016, 2016 IEEE 8th International Power Electronics and Motion Control Conference (IPEMC-ECCE Asia).

[23]  T. Shimizu,et al.  Evaluation of the iron loss of an inductor based on dynamic minor characteristics , 2007, 2007 European Conference on Power Electronics and Applications.

[24]  Xibo Yuan,et al.  A Design Optimization Tool for Maximizing the Power Density of 3-Phase DC–AC Converters Using Silicon Carbide (SiC) Devices , 2018, IEEE Transactions on Power Electronics.

[25]  Charles R. Sullivan,et al.  Accurate prediction of ferrite core loss with nonsinusoidal waveforms using only Steinmetz parameters , 2002, 2002 IEEE Workshop on Computers in Power Electronics, 2002. Proceedings..

[26]  C. W. Tipton,et al.  High-Density Nanocrystalline Core Transformer for High-Power High-Frequency Resonant Converter , 2008, IEEE Transactions on Industry Applications.

[27]  Toshihisa Shimizu,et al.  Evaluation of Iron Loss of AC Filter Inductor Used in Three-Phase PWM Inverters Based on an Iron Loss Analyzer , 2016, IEEE Transactions on Power Electronics.