Fiber optic refractive index sensors through spectral detection of Rayleigh backscattering in a chemically etched MgO-based nanoparticle-doped fiber.

We demonstrate and experimentally validate a fiber optic refractive index (RI) sensor obtained by simply etching a high-scattering MgO-based nanoparticle-doped single-mode fiber in hydrofluoric acid (HF). The fiber has 32.3 dB stronger Rayleigh scattering than a standard fiber, allowing a detection of scattering spectral signatures with an optical backscatter reflectometer, even when the core is exposed to the outer RI. The obtained sensitivity is 1.53 nm/RIU (RI units), measured by correlating the scattering spectra. We prove the possibility of implementing a distributed RI detection (seven locations spaced by 1 mm). The fabrication method for this RI sensor is simplified, since it simply requires etching in an HF bath, without the need of inscribing reflective elements or fabricating microstructures in the fiber.

[1]  Herman M. Presby,et al.  A new technique for the preparation of low-loss and graded-index optical fibers , 1974 .

[2]  Carlo Molardi,et al.  Partially etched chirped fiber Bragg grating (pECFBG) for joint temperature, thermal profile, and refractive index detection. , 2018, Optics express.

[3]  B. Soller,et al.  High resolution optical frequency domain reflectometry for characterization of components and assemblies. , 2005, Optics express.

[4]  B. Guan,et al.  In-situ DNA hybridization detection with a reflective microfiber grating biosensor. , 2014, Biosensors & bioelectronics.

[5]  C. Liao,et al.  Highly sensitive surface plasmon resonance biosensor based on a low-index polymer optical fiber. , 2018, Optics express.

[6]  A. Cusano,et al.  Thinned fiber Bragg gratings as refractive index sensors , 2005, IEEE Sensors Journal.

[7]  Marc Wuilpart,et al.  High resolution interrogation of tilted fiber grating SPR sensors from polarization properties measurement. , 2011, Optics express.

[8]  Fiber optic hydrogen sensor based on an etched Bragg grating coated with palladium. , 2015, Applied optics.

[9]  G. Spierings.  Wet chemical etching of silicate glasses in hydrofluoric acid based solutions , 1993 .

[10]  Victor Lambin Iezzi,et al.  Enhancement of accuracy in shape sensing of surgical needles using optical frequency domain reflectometry in optical fibers. , 2017, Biomedical optics express.

[11]  M. Froggatt,et al.  High-spatial-resolution distributed strain measurement in optical fiber with rayleigh scatter. , 1998, Applied optics.

[12]  P. Shankar,et al.  A review of fiber-optic biosensors , 2007 .

[13]  C. Caucheteur,et al.  Cancer biomarker sensing using packaged plasmonic optical fiber gratings: Towards in vivo diagnosis. , 2017, Biosensors & bioelectronics.

[14]  Wilfried Blanc,et al.  Fabrication of Rare Earth‐Doped Transparent Glass Ceramic Optical Fibers by Modified Chemical Vapor Deposition , 2011, 1108.3195.

[15]  Reginald K. Lee,et al.  Highly sensitive fiber Bragg grating refractive index sensors , 2005 .

[16]  S. Campopiano,et al.  Ultrasensitive biosensor based on long period grating coated with polycarbonate-graphene oxide multilayer , 2018, Sensors and Actuators B: Chemical.

[17]  Bai-Ou Guan,et al.  High-sensitivity DNA biosensor based on microfiber Sagnac interferometer. , 2017, Optics express.

[18]  R. Howe,et al.  A review of the chemical reaction mechanism and kinetics for hydrofluoric acid etching of silicon dioxide for surface micromachining applications , 1993 .