Surface characteristics and electrochemical capacitances of carbon aerogels obtained from resorcinol and pyrocatechol using boric and oxalic acids as polymerization catalysts

[1]  A. Szczurek,et al.  Structure and electrochemical capacitance of carbon cryogels derived from phenol–formaldehyde resins , 2010 .

[2]  M. C. Miras,et al.  Characterization of monolithic porous carbon prepared from resorcinol/formaldehyde gels with cationic surfactant , 2010 .

[3]  J. A. Menéndez,et al.  Exploring New Routes in the Synthesis of Carbon Xerogels for Their Application in Electric Double-Layer Capacitors† , 2010 .

[4]  Mykola Seredych,et al.  Combined Effect of Nitrogen‐ and Oxygen‐Containing Functional Groups of Microporous Activated Carbon on its Electrochemical Performance in Supercapacitors , 2009 .

[5]  D. Fairen-jimenez,et al.  Carbon aerogels from gallic acid–resorcinol mixtures as adsorbents of benzene, toluene and xylenes from dry and wet air under dynamic conditions , 2009 .

[6]  P. Serp,et al.  Carbon materials for catalysis , 2009 .

[7]  M. Weaver,et al.  Boron-doped carbon powders formed at 1000 °C and one atmosphere , 2008 .

[8]  Zhigang Chen,et al.  Synthesis and Electrochemical Property of Boron-Doped Mesoporous Carbon in Supercapacitor , 2008 .

[9]  Mykola Seredych,et al.  Surface functional groups of carbons and the effects of their chemical character, density and accessibility to ions on electrochemical performance , 2008 .

[10]  T. Baumann,et al.  High surface area carbon aerogel monoliths with hierarchical porosity , 2008 .

[11]  C. Moreno-Castilla.  Carbon Gels in Catalysis , 2008 .

[12]  G. Lu,et al.  3D aperiodic hierarchical porous graphitic carbon material for high-rate electrochemical capacitive energy storage. , 2008, Angewandte Chemie.

[13]  C. Turner,et al.  Effect of an Electric Field on the Adsorption of Metal Clusters on Boron-Doped Carbon Surfaces , 2007 .

[14]  F. Carrasco-Marín,et al.  Adsorption of benzene, toluene, and xylenes on monolithic carbon aerogels from dry air flows. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[15]  A. Ōya,et al.  Preparation and oxygen reduction activity of BN-doped carbons , 2007 .

[16]  D. Fairen-jimenez,et al.  Porosity and surface area of monolithic carbon aerogels prepared using alkaline carbonates and organic acids as polymerization catalysts , 2006 .

[17]  C. Turner,et al.  Stabilization of platinum clusters by substitutional boron dopants in carbon supports. , 2006, The journal of physical chemistry. B.

[18]  A. Hollenkamp,et al.  Carbon properties and their role in supercapacitors , 2006 .

[19]  J. Pirard,et al.  Non Intrusive Mercury Porosimetry: Pyrolysis of Resorcinol‐Formaldehyde Xerogels , 2006 .

[20]  Y. Kaburagi,et al.  Electric double layer capacitance of multi-walled carbon nanotubes and B-doping effect , 2006 .

[21]  J. Rouzaud,et al.  Carbon aerogels, cryogels and xerogels: Influence of the drying method on the textural properties of porous carbon materials , 2005 .

[22]  T. Centeno,et al.  On the determination of surface areas in activated carbons , 2005 .

[23]  Michael Nastasi,et al.  X-ray photoelectron spectroscopy investigation of boron carbide films deposited by sputtering , 2004 .

[24]  N. Krstajić,et al.  Characterization of carbon cryogel synthesized by sol–gel polycondensation and freeze-drying , 2004 .

[25]  M. Inagaki,et al.  Nanocarbons––recent research in Japan , 2004 .

[26]  James A. Ritter,et al.  Preparation and Properties of Resorcinol–Formaldehyde Organic and Carbon Gels , 2003 .

[27]  C. Roy,et al.  Surface spectroscopic study of basic sites on carbon blacks , 2003 .

[28]  R. Denoyel,et al.  Characterization of aramid based activated carbon fibres by adsorption and immersion techniques , 2002 .

[29]  J. Silvestre-Albero.  Characterization of microporous solids by immersion calorimetry , 2001 .

[30]  F. Béguin,et al.  Carbon materials for the electrochemical storage of energy in capacitors , 2001 .

[31]  R. Kötz,et al.  Principles and applications of electrochemical capacitors , 2000 .

[32]  Kazuo Kobayashi,et al.  Effect of low-level boron doping on oxidation behavior of polyimide-derived carbon films , 2000 .

[33]  J. Figueiredo,et al.  Modification of the surface chemistry of activated carbons , 1999 .

[34]  D. Cazorla-Amorós,et al.  CO2 As an Adsorptive To Characterize Carbon Molecular Sieves and Activated Carbons , 1998 .

[35]  Bruce Dunn,et al.  Carbon aerogels for electrochemical applications , 1998 .

[36]  T. Nakajima,et al.  Syntheses and Structures of New Graphite-Like Materials of Composition of BCN(H) and BC3N(H). , 1996 .

[37]  T. Nakajima,et al.  Syntheses and structures of new graphite-like materials of composition BCN(H) and BC3N(H) , 1996 .

[38]  F. Rodríguez-Reinoso,et al.  Correlation between Surface Areas and Micropore Volumes of Activated Carbons Obtained from Physical Adsorption and Immersion Calorimetry , 1995 .

[39]  Carlo G. Pantano,et al.  Synthesis and characterization of boron-doped carbons , 1995 .

[40]  R. Denoyel,et al.  Assessment of the surface area and microporosity of activated charcoals from immersion calorimetry and nitrogen adsorption data , 1993 .

[41]  R. Pekala,et al.  Organic aerogels from the polycondensation of resorcinol with formaldehyde , 1989 .

[42]  Hardcover,et al.  Carbon: Electrochemical and Physicochemical Properties , 1988 .

[43]  K. Sing.  Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity (Recommendations 1984) , 1985 .

[44]  N. N. Greenwood,et al.  Chemistry of the elements , 1984 .