Measurement of a proxy for froth phase bubble sizes as a function of froth depth in flotation machines Part 1. Theoretical development and testing of a new technique

Abstract An electro-resistivity technique for measuring a proxy for froth bubble sizes as a function of height above the pulp–froth interface has been developed. Froth phase bubble size measurements were performed in a laboratory mini-flotation column. Comparison of the proxy herein termed average intra-bubble impact distance (IID) from this new technique to the Sauter-mean diameter from the conventional photographic method established a linear correlation. The average IID from the new technique was higher than the Sauter-mean diameter at all froth segments. Both techniques were able to capture the general increase in bubble sizes as a function of froth height.

[1]  M. Falutsu.  Column flotation froth characteristics: stability of the bubble-particle system , 1994 .

[2]  Gordon Forbes,et al.  Texture and Bubble Size Measurements for Modelling Concentrate Grade in Flotation Froth Systems , 2007 .

[3]  J. Finch,et al.  Selectivity in column flotation froths , 1988 .

[4]  Emmanuel Manlapig,et al.  Selective transport of attached particles across the pulp-froth interface , 2006 .

[5]  J. Finch,et al.  Holdup Profile and Bubble Size Distribution of Flotation Column Froths , 1986 .

[6]  Stephen J. Neethling,et al.  A novel approach for estimating the average bubble size for foams flowing in vertical columns , 2004 .

[7]  James A. Finch,et al.  Apparent hindered settling in a gas-liquid-solid countercurrent column , 1986 .

[8]  S. Farrokhpay.  The significance of froth stability in mineral flotation--a review. , 2011, Advances in colloid and interface science.

[9]  Michael Hugh. Moys.  A study of processes occurring in flotation froths. , 1979 .

[10]  Raghbir Singh Khandpur,et al.  Handbook of Biomedical Instrumentation , 1987 .

[11]  G. Jameson,et al.  A study of bubble coalescence in flotation froths , 2003 .

[12]  Dee Bradshaw,et al.  Measurement of the sub-process of bubble loading in flotation , 1996 .

[13]  H. R. Carlon.  Ion content of air humidified by boiling water , 1980 .

[14]  Energy absorption in a bamboo foam , 2008 .

[15]  Ws. Rasband.  ImageJ, U.S. National Institutes of Health, Bethesda, Maryland, USA , 2011 .

[16]  S. Wilson,et al.  The drag-out problem in film coating theory , 1982 .

[17]  E. Warburg,et al.  Ueber das Verhalten sogenannter unpolarisirbarer Elektroden gegen Wechselstrom , 1899 .

[18]  Juan Yianatos,et al.  Particle entrainment model for industrial flotation cells , 2010 .

[19]  M. Falutsu,et al.  Direct measurement of froth drop back and collection zone recovery in a laboratory flotation column , 1989 .

[20]  George C. Simpson.  On the Electricity of Rain and Its Origin in Thunderstorms , 1909 .