Integrated Prognostics for Component Health Management

[1]  Shifeng Wu,et al.  Sliding Wear Calculation in Spur Gears , 1993 .

[2]  Paul A. Wawrzynek,et al.  Consideration of Moving Tooth Load in Gear Crack Propagation Predictions , 2001 .

[3]  S. Andersson,et al.  Simulation of mild wear in spur gears , 1997 .

[4]  J. Archard.  Contact and Rubbing of Flat Surfaces , 1953 .

[5]  Ward O. Winer,et al.  Wear control handbook , 1980 .

[6]  Matthew J. Watson,et al.  Shaft coupling model-based prognostics enhanced by vibration diagnostics , 2009 .

[7]  R. Gill,et al.  Cox's regression model for counting processes: a large sample study : (preprint) , 1982 .

[8]  Lei Jiang,et al.  Reliability and Maintenance Modeling for Dependent Competing Failure Processes With Shifting Failure Thresholds , 2012, IEEE Transactions on Reliability.

[9]  F. Sadeghi,et al.  Spall initiation and propagation due to debris denting , 1996 .

[10]  Steven Y. Liang,et al.  Dynamic Prognostic Prediction of Defect Propagation on Rolling Element Bearings , 1999 .

[11]  Hong-Zhong Huang,et al.  An Approach to Reliability Assessment Under Degradation and Shock Process , 2011, IEEE Transactions on Reliability.

[12]  Kunigal N. Shivakumar,et al.  An equivalent domain integral method in the two-dimensional analysis of mixed mode crack problems , 1990 .

[13]  Kenneth A. Loparo,et al.  Physically based diagnosis and prognosis of cracked rotor shafts , 2002, SPIE Defense + Commercial Sensing.

[14]  P. C. Paris,et al.  A Critical Analysis of Crack Propagation Laws , 1963 .

[15]  Y. Marzouk,et al.  A stochastic collocation approach to Bayesian inference in inverse problems , 2009 .

[16]  Roberto Ballarini,et al.  Effect of Rim Thickness on Gear Crack Propagation Path. , 1997 .

[17]  Frank L. Lewis,et al.  Intelligent Fault Diagnosis and Prognosis for Engineering Systems , 2006 .

[18]  Viliam Makis,et al.  A Control-Limit Policy And Software For Condition-Based Maintenance Optimization , 2001 .

[19]  D. Xiu.  Efficient collocational approach for parametric uncertainty analysis , 2007 .

[20]  P. Goel,et al.  The Statistical Nature of Fatigue Crack Propagation , 1979 .

[21]  Irebert R. Delgado,et al.  Dynamic Analysis of Spur Gear Transmissions (DANST), PC Version 3.00 User Manual. , 1996 .

[22]  M. Eldred.  Recent Advances in Non-Intrusive Polynomial Chaos and Stochastic Collocation Methods for Uncertainty Analysis and Design , 2009 .

[23]  T. Anderson,et al.  Fracture mechanics - Fundamentals and applications , 2017 .

[24]  F. Erdogan,et al.  On the Crack Extension in Plates Under Plane Loading and Transverse Shear , 1963 .

[25]  Luca Podofillini,et al.  Condition-based maintenance optimization by means of genetic algorithms and Monte Carlo simulation , 2002, Reliab. Eng. Syst. Saf..

[26]  S. Marble,et al.  Predicting the remaining life of propulsion system bearings , 2006, 2006 IEEE Aerospace Conference.

[27]  Anette Andersson,et al.  A method to determine dynamic loads on spur gear teeth and on bearings , 2003 .

[28]  B. Alfredsson,et al.  A fracture mechanical life prediction method for rolling contact fatigue based on the asperity point load mechanism , 2012 .

[29]  Gianluca Iaccarino,et al.  Padé-Legendre approximants for uncertainty analysis with discontinuous response surfaces , 2009, J. Comput. Phys..

[30]  Zhigang Tian,et al.  A framework for predicting the remaining useful life of a single unit under time-varying operating conditions , 2013 .

[31]  Ian Howard,et al.  The torsional stiffness of involute spur gears , 2004 .

[32]  Zhigang Tian,et al.  An artificial neural network method for remaining useful life prediction of equipment subject to condition monitoring , 2012, J. Intell. Manuf..

[33]  Michael G. Pecht,et al.  Support Vector Prognostics Analysis of Electronic Products and Systems , 2007, AAAI Fall Symposium: Artificial Intelligence for Prognostics.

[34]  Zhigang Tian,et al.  Uncertainty Quantification in Gear Remaining Useful Life Prediction Through an Integrated Prognostics Method , 2013, IEEE Transactions on Reliability.

[35]  J. W. Evans,et al.  An Extended Model for Determining Dynamic Loads in Spur Gearing , 1981 .

[36]  Habib N. Najm,et al.  Numerical Challenges in the Use of Polynomial Chaos Representations for Stochastic Processes , 2005, SIAM J. Sci. Comput..

[37]  Habib N. Najm,et al.  Stochastic spectral methods for efficient Bayesian solution of inverse problems , 2005, J. Comput. Phys..

[38]  Raphael T. Haftka,et al.  Uncertainty Reduction of Damage Growth Properties Using Structural Health Monitoring , 2010 .

[39]  Nagi Gebraeel,et al.  Residual life predictions from vibration-based degradation signals: a neural network approach , 2004, IEEE Transactions on Industrial Electronics.

[40]  A. K. S. Jardine,et al.  Maintenance, Replacement, and Reliability , 2021 .

[41]  Ahmet Kahraman,et al.  A Surface Wear Prediction Methodology for Parallel-Axis Gear Pairs , 2004 .

[42]  R. W. Cornell,et al.  Dynamic Tooth Loads and Stressing for High Contact Ratio Spur Gears , 1978 .

[43]  T. A. Harris,et al.  Fatigue Failure Progression in Ball Bearings , 2001 .

[44]  Ming J. Zuo,et al.  Simulation of spur gear dynamics and estimation of fault growth , 2008 .

[45]  D. Cox.  Regression Models and Life-Tables , 1972 .

[46]  Jan Nordström,et al.  Numerical analysis of the Burgers' equation in the presence of uncertainty , 2009, J. Comput. Phys..

[47]  Robert B. Abernethy,et al.  The new Weibull handbook , 1993 .

[48]  Zbigniew Kotulski,et al.  On efficiency of identification of a stochastic crack propagation model based on Virkler experimental data , 1998 .

[49]  M. Williams,et al.  On the Stress Distribution at the Base of a Stationary Crack , 1956 .

[50]  C. Joseph Lu,et al.  Using Degradation Measures to Estimate a Time-to-Failure Distribution , 1993 .

[51]  Ming J. Zuo,et al.  Analysis of the Vibration Response of a Gearbox With Gear Tooth Faults , 2004 .

[52]  T. A. Zang,et al.  Spectral methods for fluid dynamics , 1987 .

[53]  Donald R. Houser,et al.  Optimum Profile Modifications for the Minimization of Static Transmission Errors of Spur Gears , 1986 .

[54]  Peter W. Tse,et al.  Prediction of Machine Deterioration Using Vibration Based Fault Trends and Recurrent Neural Networks , 1999 .

[55]  M. Eldred,et al.  Evaluation of Non-Intrusive Approaches for Wiener-Askey Generalized Polynomial Chaos. , 2008 .

[56]  Dongbin Xiu,et al.  High-Order Collocation Methods for Differential Equations with Random Inputs , 2005, SIAM J. Sci. Comput..

[57]  Jing Pan,et al.  Prognostic Degradation Models for Computing and Updating Residual Life Distributions in a Time-Varying Environment , 2008, IEEE Transactions on Reliability.

[58]  Dongbin Xiu,et al.  The Wiener-Askey Polynomial Chaos for Stochastic Differential Equations , 2002, SIAM J. Sci. Comput..

[59]  M. German,et al.  Crack extension modeling with singular quadratic isoparametric elements , 1976 .

[60]  L. Jaw,et al.  A run-time test system for maturing intelligent system/vehicle capabilities - SIDAL , 2004, 2004 IEEE Aerospace Conference Proceedings (IEEE Cat. No.04TH8720).

[61]  Daming Lin,et al.  A review on machinery diagnostics and prognostics implementing condition-based maintenance , 2006 .

[62]  Roger G. Ghanem,et al.  Physical Systems with Random Uncertainties: Chaos Representations with Arbitrary Probability Measure , 2005, SIAM J. Sci. Comput..