Motion/Force Transmission Analysis of Parallel Mechanisms With Planar Closed-Loop Subchains

Singularities are one of the most important issues affecting the performance of parallel mechanisms. A parallel mechanism with less than six degrees of freedom (6DOF) is classed as having lower mobility. In addition to input–output singularities, such mechanisms potentially suffer from singularities among their constraints. Furthermore, the utilization of closed-loop subchains (CLSCs) may introduce additional singularities, which can strongly affect the motion/force transmission ability of the entire mechanism. In this paper, we propose a technique for the analysis of singularities occurring within planar CLSCs, along with a finite, dimensionless, frame invariant index, based on screw theory, for examining the closeness to these singularities. The integration of the proposed index with existing performance measures is discussed in detail and exemplified on a prototype industrial parallel mechanism.

[1]  J. Plücker,et al.  Neue Geometrie des Raumes : gegründet auf die Betrachtung der geraden Linie als Raumelement , 1868 .

[2]  Bernard Roth,et al.  A Transmission Index for Spatial Mechanisms , 1973 .

[3]  K. H. Hunt,et al.  Kinematic geometry of mechanisms , 1978 .

[4]  T. P. Goodman,et al.  Kinematics and Linkage Design , 1986 .

[5]  R. Clavel,et al.  A Fast Robot with Parallel Geometry , 1988 .

[6]  Clément Gosselin,et al.  Singularity analysis of closed-loop kinematic chains , 1990, IEEE Trans. Robotics Autom..

[7]  Ming-June Tsai,et al.  The Transmissivity and Manipulability of Spatial Mechanisms , 1994 .

[8]  L. W. Tsai,et al.  The Jacobian Analysis of a Parallel Manipulator Using Reciprocal Screws , 1998 .

[9]  C. Barus.  A treatise on the theory of screws , 1998 .

[10]  O. Company,et al.  H4: a new family of 4-DOF parallel robots , 1999, 1999 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (Cat. No.99TH8399).

[11]  Jian S. Dai,et al.  Interrelationship between screw systems and corresponding reciprocal systems and applications , 2001 .

[12]  Lung-Wen Tsai,et al.  Jacobian Analysis of Limited-DOF Parallel Manipulators , 2002 .

[13]  Q. C. Li,et al.  General Methodology for Type Synthesis of Symmetrical Lower-Mobility Parallel Manipulators and Several Novel Manipulators , 2002, Int. J. Robotics Res..

[14]  Clément Gosselin,et al.  Constraint singularities of parallel mechanisms , 2002, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292).

[15]  J. R. Jones,et al.  Null–space construction using cofactors from a screw–algebra context , 2002, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[16]  Satish Chand,et al.  Transmission angle in mechanisms (Triangle in mech) , 2002 .

[17]  J. Dai,et al.  Geometric Analysis of Overconstrained Parallel Manipulators with Three and Four Degrees of Freedom , 2002 .

[18]  Joseph K. Davidson,et al.  Robots and Screw Theory: Applications of Kinematics and Statics to Robotics , 2004 .

[19]  Torgny Brogårdh,et al.  Kinematic analysis and error modeling of TAU parallel robot , 2005 .

[20]  Hui Zhang,et al.  Kinematic and dynamic modelling for real-time control of Tau parallel robot , 2005 .

[21]  Jian S. Dai,et al.  From Origami to a New Class of Centralized 3-DOF Parallel Mechanisms , 2007 .

[22]  J. Angeles,et al.  Generalized transmission index and transmission quality for spatial linkages , 2007 .

[23]  Damien Chablat,et al.  Kinematic Analysis of a New Parallel Machine Tool: the Orthoglide , 2007, ArXiv.

[24]  Jianguo Zhao,et al.  Geometrical method to determine the reciprocal screws and applications to parallel manipulators , 2009, Robotica.

[25]  P. Wenger,et al.  Constraint and Singularity Analysis of Lower-Mobility Parallel Manipulators With Parallelogram Joints , 2010 .

[26]  Matteo Zoppi,et al.  Kinematics analysis of the exechon tripod , 2010 .

[27]  Chao Wu,et al.  Performance evaluation of parallel manipulators: Motion/force transmissibility and its index , 2010 .

[28]  Saeid Nahavandi,et al.  Improving the kinematic performance of the SCARA-Tau PKM , 2010, 2010 IEEE International Conference on Robotics and Automation.

[29]  Hairong Fang,et al.  Reciprocal screw theory based singularity analysis of a novel 3-DOF parallel manipulator , 2012 .

[30]  Saeid Nahavandi,et al.  Parallel Manipulators With a Rotation-Symmetric Arm System , 2012 .

[31]  Jinsong Wang,et al.  A New Approach for Singularity Analysis and Closeness Measurement to Singularities of Parallel Manipulators , 2012 .

[32]  M. T. Masouleh,et al.  Singularity Conditions of 3T1R Parallel Manipulators with Identical Limb Structures , 2012 .

[33]  J. Dai,et al.  Constraint analysis and bifurcated motion of the 3PUP parallel mechanism , 2012 .

[34]  Xin-Jun Liu,et al.  Motion/Force Constrainability Analysis of Lower-Mobility Parallel Manipulators , 2014 .

[35]  Jie Li,et al.  Performance Indices for Parallel Robots Considering Motion/Force Transmissibility , 2014, ICIRA.

[36]  Saeid Nahavandi,et al.  Workspace analysis of two similar 3-DOF axis-symmetric parallel manipulators , 2014, 2014 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[37]  Saeid Nahavandi,et al.  A method for extending planar axis-symmetric parallel manipulators to spatial mechanisms , 2015 .