Design and tuning of fixed-switching-frequency second-order sliding-mode controller for doubly fed induction generator power control

A pulse-width modulation-based second-order sliding-mode control (2-SMC) scheme for the rotor-side converter feeding a doubly fed induction generator (DFIG) is presented. It is aimed at achieving both high robustness to DFIG parameter variations and close tracking of a predefined rotor speed-dependent optimum power curve, while preserving a fixed switching frequency. In addition, it eludes the appearance of chatter. Tuning equations are also derived to adjust all its gains and constants. The proposed 2-SMC algorithm is evaluated as part of a sensorless scheme on the mathematical model of a 660-kW DFIG via numerical simulation. Its operation in terms of robustness and dynamic performance is then compared with that of a classical PI-based vector control (VC) strategy. The validity of the suggested 2-SMC scheme, as well as its superior performance in comparison with its PI-based VC counterpart, are corroborated through experimentation carried out on a 7-kW DFIG test bench.

[1]  M.E.H. Benbouzid,et al.  High-order sliding mode control of DFIG-based marine current turbine , 2008, 2008 34th Annual Conference of IEEE Industrial Electronics.

[2]  Mohamed El Hachemi Benbouzid,et al.  High-Order Sliding-Mode Control of Variable-Speed Wind Turbines , 2009, IEEE Transactions on Industrial Electronics.

[3]  I. Zubia,et al.  In situ electrical parameter identification method for induction wind generators , 2011 .

[4]  T. Ahmed-Ali,et al.  High-order sliding mode control of a DFIG-based Wind Turbine for power maximization and grid fault tolerance , 2009, 2009 IEEE International Electric Machines and Drives Conference.

[5]  A. Levant Sliding order and sliding accuracy in sliding mode control , 1993 .

[6]  Sheng Yang,et al.  A Speed-Adaptive Reduced-Order Observer for Sensorless Vector Control of Doubly Fed Induction Generator-Based Variable-Speed Wind Turbines , 2010, IEEE Transactions on Energy Conversion.

[7]  G. Tapia,et al.  Modeling and control of a wind turbine driven doubly fed induction generator , 2003 .

[8]  Jon Clare,et al.  Doubly fed induction generator using back-to-back PWM converters and its application to variable-speed wind-energy generation , 1996 .

[9]  A. Tapia,et al.  Two Alternative Modeling Approaches for the Evaluation of Wind Farm Active and Reactive Power Performances , 2006, IEEE Transactions on Energy Conversion.

[10]  Barry W. Williams,et al.  Sensorless second-order sliding-mode speed control of a voltage-fed induction-motor drive using nonlinear state feedback , 2005 .

[11]  Heng Nian,et al.  Direct Active and Reactive Power Regulation of DFIG Using Sliding-Mode Control Approach , 2010, IEEE Transactions on Energy Conversion.

[12]  Vadim I. Utkin,et al.  Sliding mode control design principles and applications to electric drives , 1993, IEEE Trans. Ind. Electron..

[13]  Vadim I. Utkin,et al.  Sliding mode control in electromechanical systems , 1999 .

[14]  Lie Xu,et al.  Direct active and reactive power control of DFIG for wind energy generation , 2006, IEEE Transactions on Energy Conversion.

[15]  Jong-Lick Lin A new approach of dead-time compensation for PWM voltage inverters , 2002 .

[16]  G. Tapia,et al.  Wind generation optimisation algorithm for a doubly fed induction generator , 2005 .

[17]  Antonella Ferrara,et al.  On second order sliding mode controllers , 1998 .

[18]  Vadim I. Utkin,et al.  A control engineer's guide to sliding mode control , 1999, IEEE Trans. Control. Syst. Technol..

[19]  Karl Johan Åström,et al.  PID Controllers: Theory, Design, and Tuning , 1995 .

[20]  Lie Xu,et al.  Direct Power Control of DFIG With Constant Switching Frequency and Improved Transient Performance , 2007, IEEE Transactions on Energy Conversion.

[21]  Zhang Yan,et al.  Sensorless sliding-mode control of induction motors , 2000, IEEE Trans. Ind. Electron..

[22]  J. X. Ostolaza,et al.  Sliding-mode control of doubly-fed generator for optimum power curve tracking , 2010 .

[23]  Roberto Cárdenas,et al.  Sensorless Control of Doubly-Fed Induction Generators Using a Rotor-Current-Based MRAS Observer , 2008, IEEE Transactions on Industrial Electronics.