A parametric shear damage evolution model for combined clamped and adhesively bonded interfaces

[1]  R. Wegman,et al.  Surface Preparation Techniques for Adhesive Bonding , 2012 .

[2]  M.F.S.F. de Moura,et al.  Pure mode II fracture characterization of composite bonded joints , 2009 .

[3]  Pedro P. Camanho,et al.  An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models , 2007 .

[4]  M. D. Moura,et al.  Cohesive and continuum damage models applied to fracture characterization of bonded joints , 2006 .

[5]  G. Kelly,et al.  LOAD TRANSFER IN HYBRID (BONDED/BOLTED) COMPOSITE SINGLE-LAP JOINTS , 2005 .

[6]  Stefan Björklund,et al.  A finite element-based model of normal contact between rough surfaces , 2003 .

[7]  P. Camanho,et al.  Numerical Simulation of Mixed-Mode Progressive Delamination in Composite Materials , 2003 .

[8]  P. Camanho,et al.  Mixed-Mode Decohesion Finite Elements for the Simulation of Delamination in Composite Materials , 2002 .

[9]  Eugenio Dragoni,et al.  Cumulative static strength of tightened joints bonded with anaerobic adhesives , 2002 .

[10]  Muhammet Cerit,et al.  Three Dimensional Stress Analysis in Adhesively Bonded Joints with Rivets , 1999 .

[11]  Viggo Tvergaard,et al.  On the toughness of ductile adhesive joints , 1996 .

[12]  A. Needleman.  A Continuum Model for Void Nucleation by Inclusion Debonding , 1987 .

[13]  Y. Yamaguchi,et al.  Mechanical behaviour of a combined joint composed of mechanical fastening and adhesive bonding , 1985 .

[14]  J. P. Bell,et al.  Adhesives Technology Handbook , 1985 .

[15]  J. T. Oden,et al.  Models and computational methods for dynamic friction phenomena , 1984 .

[16]  L. J. Hart-Smith,et al.  Bonded-Bolted Composite Joints , 1984 .

[17]  J. Rice.  A path-independent integral and the approximate analysis of strain , 1968 .

[18]  Glaucio H. Paulino,et al.  Mode I fracture of adhesive joints using tailored cohesive zone models , 2008 .

[19]  M. Moura.  Progressive Damage Modelling , 2008 .

[20]  Andreas Öchsner,et al.  Modeling of Adhesively Bonded Joints , 2008 .

[21]  L. Champaney,et al.  A DAMAGE MODEL FOR SIMULATING DECOHESION IN ADHESIVELY BONDED ASSEMBLIES , 2004 .

[22]  P. Camanho,et al.  Decohesion Elements using Two and Three-Parameter Mixed-Mode Criteria , 2001 .

[23]  E. Dragoni,et al.  Intrinsic static strength of friction interfaces augmented with anaerobic adhesives , 2000 .

[24]  J. Comyn.  Surface preparation techniques for adhesive bonding: R.F. Wegman Noyes Publications, Park Ridge, NJ, USA, 1989 ($42.00) , 1990 .