Comparative study of current mode and voltage mode sense amplifier used for 28nm SRAM
暂无分享,去创建一个
Increased process variation and reduced operating voltage present two of the main challenges in using sense amplifiers for small geometry bulk CMOS process technology. This fact coupled with the need to increase on-chip memory to reduce traffic on the bus and increase performance creates the need for a robust and reliable sense amplifier - a differentiating factor in memory area, power, and speed. We present a detailed study of the Voltage Latched Sense Amplifier (VLSA) and the Current Latched Sense Amplifier (CLSA) design in 28nm industry standard process technology [1][2]. We present results on how the two sense amplifier behave for the two design topology for low power (LP) process technology optimized for mobile low leakage application and the second one is high performance High Performance (HP) applications. Detailed Spice simulation with statistical models and Monte Carlo simulations is utilized to compare the two designs for active power, leakage power, speed, and area. Our study shows that VLSA performs better than CLSA - being 67% faster, 35% smaller area, and similar active power for the LP. The VLSA also performed better than the CLSA is the HP technology as well. The sensitivity to temperature for the LP technology node was more at high voltage but for the HP process the lower voltage perform worse.
[1] C.C. Chen,et al. A highly manufacturable 28nm CMOS low power platform technology with fully functional 64Mb SRAM using dual/tripe gate oxide process , 2006, 2009 Symposium on VLSI Technology.
[2] Jacob A. Abraham,et al. A reduced voltage swing circuit using a single supply to enable lower voltage operation for SRAM-based memory , 2012, Microelectron. J..
[3] David Harris,et al. CMOS VLSI Design: A Circuits and Systems Perspective , 2004 .
[4] Baker Mohammad,et al. Cache Design for Low Power and High Yield , 2008, ISQED 2008.