Verification of an empirical prediction method for railway induced vibrations by means of numerical simulations

Abstract Vibrations induced by the passage of trains are a major environmental concern in urban areas. In practice, vibrations are often predicted using empirical methods such as the detailed vibration assessment procedure of the Federal Railroad Administration (FRA) of the U.S. Department of Transportation. This procedure allows predicting ground surface vibrations and re-radiated noise in buildings. Ground vibrations are calculated based on force densities, measured when a vehicle is running over a track, and line source transfer mobilities, measured on site to account for the effect of the local geology on wave propagation. Compared to parametric models, the advantage of this approach is that it inherently takes into account all important parameters. It can only be used, however, when an appropriate estimation of the force density is available. In this paper, analytical expressions are derived for the force density and the line source transfer mobility of the FRA procedure. The derivation of these expressions is verified using a coupled finite element–boundary element method.

[1]  Geert Lombaert,et al.  Ground-borne vibration due to static and dynamic axle loads of InterCity and high-speed trains , 2009 .

[2]  Geert Lombaert,et al.  Experimental validation of a numerical model for subway induced vibrations , 2009 .

[3]  Ralf Klein,et al.  A numerical model for ground-borne vibrations from underground railway traffic based on a periodic finite element–boundary element formulation , 2006 .

[4]  A. Metrikine,et al.  Surface ground vibration due to a moving train in a tunnel : Two-dimensional model , 2000 .

[5]  Geert Lombaert,et al.  The experimental validation of a numerical model for the prediction of railway induced vibrations , 2006 .

[6]  Lars Vabbersgaard Andersen,et al.  Coupled Boundary and Finite Element Analysis of Vibration from Railway Tunnels: a comparison of two- and three-dimensional models , 2006 .

[7]  Jim Nelson,et al.  A PREDICTION PROCEDURE FOR RAIL TRANSPORTATION GROUNDBORNE NOISE AND VIBRATION , 1987 .

[8]  E. C. Bovey.  Development of an impact method to determine the vibration transfer characteristics of railway installations , 1983 .

[9]  T. X. Wu,et al.  VIBRATION ANALYSIS OF RAILWAY TRACK WITH MULTIPLE WHEELS ON THE RAIL , 2001 .

[10]  Hem Hunt,et al.  A three-dimensional tunnel model for calculation of train-induced ground vibration , 2006 .

[11]  Geert Degrande,et al.  A comparison of two numerical models for the prediction of vibrations from underground railway traffic , 2007 .

[12]  Manfred Heckl,et al.  STRUCTURE-BORNE SOUND AND VIBRATION FROM RAIL TRAFFIC , 1996 .

[13]  Chris Jones,et al.  Ground vibration generated by a load moving along a railway track , 1999 .

[14]  Hem Hunt.  MODELLING OF RAIL VEHICLES AND TRACK FOR CALCULATION OF GROUND-VIBRATION TRANSMISSION INTO BUILDINGS , 1996 .

[15]  Hem Hunt,et al.  Ground vibration generated by trains in underground tunnels , 2006 .

[16]  Pedro Galvín,et al.  Analysis of ground motion due to moving surface loads induced by high-speed trains , 2007 .

[17]  Hem Hunt,et al.  Modelling of road vehicles for calculation of traffic-induced ground vibration as a random process , 1991 .

[18]  Lutz Auersch,et al.  The excitation of ground vibration by rail traffic: theory of vehicle–track–soil interaction and measurements on high-speed lines , 2005 .

[19]  Geert Degrande,et al.  Vibrations due to a test train at variable speeds in a deep bored tunnel embedded in London clay , 2004 .

[20]  H. Grundmann,et al.  The response of a layered half-space to traffic loads moving along its surface , 1999 .