Study of the dynamics of material removal processes in combined pulse laser drilling of alumina ceramic

[1]  Cong Wang,et al.  Large-area cactus-like micro-/nanostructures with anti-reflection and superhydrophobicity fabricated by femtosecond laser and thermal treatment , 2022, Surfaces and Interfaces.

[2]  K. Li,et al.  A weighted adaptive transfer learning for tool tip dynamics prediction of different machine tools , 2022, Comput. Ind. Eng..

[3]  Cong Wang,et al.  Advances in Laser Drilling of Structural Ceramics , 2022, Nanomaterials.

[4]  Ji’an Duan,et al.  Combined pulse laser: Reliable tool for high-quality, high-efficiency material processing , 2022, Optics & Laser Technology.

[5]  N. Sugita,et al.  Investigation of damage generation process by stress waves during femtosecond laser drilling of SiC , 2021 .

[6]  Libo Zhao,et al.  Crystal cleavage, periodic nanostructure and surface modification of SiC ablated by femtosecond laser in different media , 2021 .

[7]  Guofeng Wang,et al.  New ablation evolution behaviors in micro-hole drilling of 2.5D Cf/SiC composites with millisecond laser , 2021 .

[8]  X. Mei,et al.  Optimization of Trepanning Patterns for Holes Ablated Using Nanosecond Pulse Laser in Al2O3 Ceramics Substrate , 2021, Materials.

[9]  Ming Chen,et al.  Investigations on Continuous-wave Laser and Pulsed Laser Induced Controllable Ablation of SiCf/SiC Composites , 2021 .

[10]  N. Ren,et al.  Water-assisted femtosecond laser drilling of alumina ceramics , 2021 .

[11]  A. K. Dubey,et al.  Parameters optimization for microcrack width in laser trepanned hole , 2021 .

[12]  X. Mei,et al.  Micromachining porous alumina ceramic for high quality trimming of turbine blade cores via double femtosecond laser scanning , 2021 .

[13]  Yongsheng Liu,et al.  Preparation and analysis of micro-holes in C/SiC composites and ablation with a continuous wave laser , 2021 .

[14]  X. Mei,et al.  Improving quality and machining efficiency of hole during AlN trepanning with nanosecond pulse laser , 2020 .

[15]  Guangzhi Zhu,et al.  Experimental study on nanosecond-millisecond combined pulse laser drilling of alumina ceramic with different spot sizes , 2020 .

[16]  Guangzhi Zhu,et al.  Characterization of micro-holes drilled in alumina ceramic by the combined pulse laser technique. , 2020, Applied optics.

[17]  N. Sugita,et al.  Ultrafast internal modification of glass by selective absorption of a continuous-wave laser into excited electrons. , 2020, Optics letters.

[18]  Guangzhi Zhu,et al.  Nanosecond-millisecond combined pulse laser drilling of alumina ceramic. , 2020, Optics letters.

[19]  R. Poprawe,et al.  Experimental investigation on a new hybrid laser process for surface structuring by vapor pressure on Ti6Al4V , 2020 .

[20]  Guangzhi Zhu,et al.  Laser processing of alumina ceramic by spatially and temporally superposing the millisecond pulse and nanosecond pulse train. , 2020, Optics express.

[21]  Guangzhi Zhu,et al.  Experimental study on the optimum matching of CW-nanosecond combined pulse laser drilling. , 2019, Applied optics.

[22]  Guangzhi Zhu,et al.  Combined pulsed laser drilling of metal by continuous wave laser and nanosecond pulse train , 2019, The International Journal of Advanced Manufacturing Technology.

[23]  J. Bude,et al.  Enhancement of laser material drilling using high-impulse multi-laser melt ejection. , 2019, Optics express.

[24]  Daniel J. Förster,et al.  Numerical study of the dynamics of the hole formation during drilling with combined ms and ns laser pulses , 2019, Optics & Laser Technology.

[25]  G. Jin,et al.  The Effect of Spot Size Combination Mode on Ablation Morphology of Aluminum Alloy by Millisecond-Nanosecond Combined-Pulse Laser , 2018, Materials.

[26]  G. Jin,et al.  Experimental study of the morphological evolution of the millisecond-nanosecond combined-pulse laser ablation of aluminum alloy. , 2018, Applied optics.

[27]  X. Ni,et al.  Through-hole energy-density threshold of silicon induced by combined millisecond and nanosecond pulsed laser , 2018 .

[28]  Bo Chen,et al.  Laser repeat drilling of alumina ceramics in static water , 2018 .

[29]  Xiaowu Ni,et al.  Surface damage induced by a combined millisecond and nanosecond laser. , 2017, Applied optics.

[30]  Chengyong Wang,et al.  Laser drilling of structural ceramics—A review , 2017 .

[31]  Hongchao Zhang,et al.  Laser-induced damage threshold of silicon under combined millisecond and nanosecond laser irradiation , 2017 .

[32]  X. Mei,et al.  Effect of temporally modulated pulse on reducing recast layer in laser drilling , 2016 .

[33]  R. Hellmann,et al.  Rapid micro hole laser drilling in ceramic substrates using single mode fiber laser , 2015 .

[34]  A. Temmler,et al.  Optical set-up for dynamic superposition of three laser beams for structuring and polishing applications. , 2014, Optics express.

[35]  V. Kancharla,et al.  Laser machining with QCW fiber lasers , 2014 .

[36]  Yi-jian Jiang,et al.  An experimental and numerical study on laser percussion drilling of thick-section alumina , 2012 .

[37]  K. I. Hajim,et al.  Experimental and theoretical investigation of the drilling of alumina ceramic using Nd:YAG pulsed laser , 2012 .

[38]  Lin Li,et al.  Experimental and theoretical investigation of fibre laser crack-free cutting of thick-section alumina , 2011 .

[39]  T. Kudo,et al.  Backside activation of power device IGBTs by microsecond-pulsed green laser annealing thermally assisted with CW diode laser , 2010, 2010 18th International Conference on Advanced Thermal Processing of Semiconductors (RTP).

[40]  Takehiro Watanabe,et al.  CW/PW dual-beam YAG laser welding of steel/aluminum alloy sheets , 2010 .

[41]  N. Dahotre,et al.  Differences in physical phenomena governing laser machining of structural ceramics , 2009 .

[42]  T. Sınmazçelik,et al.  Characterization of the drilling alumina ceramic using Nd:YAG pulsed laser , 2009 .

[43]  N. Dahotre,et al.  Computational predictions in single-dimensional laser machining of alumina , 2008 .

[44]  U. Eppelt,et al.  Analysis of laser drilled deep holes in stainless steel by superposed pulsed Nd:YAG laser radiation , 2008 .

[45]  K. Walther,et al.  Enhanced processing speed in laser drilling of stainless steel by spatially and temporally superposed pulsed Nd:YAG laser radiation , 2008 .

[46]  Gunilla Kreiss,et al.  A conservative level set method for two phase flow II , 2005, J. Comput. Phys..

[47]  Hoi Sing Kwok,et al.  Enhanced drilling using a dual-pulse Nd:YAG laser , 2001 .

[48]  M. Modest,et al.  Multiple Reflection Effects on Evaporative Cutting With a Moving CW Laser , 1991 .

[49]  V. Voller,et al.  A fixed grid numerical modelling methodology for convection-diffusion mushy region phase-change problems , 1987 .

[50]  J. Fox.  A method for improving continuous wave laser penetration of metal targets , 1975 .