Porous ceramic scaffolds with complex architectures

[1]  J. Russias,et al.  Fabrication and in vitro characterization of three-dimensional organic/inorganic scaffolds by robocasting. , 2007, Journal of biomedical materials research. Part A.

[2]  Eduardo Saiz,et al.  Ice-templated porous alumina structures , 2007, 1710.04651.

[3]  Eduardo Saiz,et al.  Freeze casting of hydroxyapatite scaffolds for bone tissue engineering. , 2006, Biomaterials.

[4]  M. Gutiérrez,et al.  A Biocompatible Bottom‐Up Route for the Preparation of Hierarchical Biohybrid Materials , 2006 .

[5]  Eduardo Saiz,et al.  Freezing as a Path to Build Complex Composites , 2006, Science.

[6]  Seeram Ramakrishna,et al.  Development of nanocomposites for bone grafting , 2005 .

[7]  Eduardo Saiz,et al.  Sintering and robocasting of beta-tricalcium phosphate scaffolds for orthopaedic applications. , 2005, Acta biomaterialia.

[8]  J. Lewis,et al.  Concentrated hydroxyapatite inks for direct-write assembly of 3-D periodic scaffolds. , 2005, Biomaterials.

[9]  Andrew I. Cooper,et al.  Aligned two- and three-dimensional structures by directional freezing of polymers and nanoparticles , 2005, Nature materials.

[10]  D. Kaplan,et al.  Porosity of 3D biomaterial scaffolds and osteogenesis. , 2005, Biomaterials.

[11]  J A Planell,et al.  Fabrication of low temperature macroporous hydroxyapatite scaffolds by foaming and hydrolysis of an alpha-TCP paste. , 2004, Biomaterials.

[12]  H. Uchida,et al.  Development of porous ceramics with well-controlled porosities and pore sizes from apatite fibers and their evaluations , 2004, Journal of materials science. Materials in medicine.

[13]  E. D. Rekow,et al.  Performance of degradable composite bone repair products made via three-dimensional fabrication techniques. , 2003, Journal of biomedical materials research. Part A.

[14]  Miqin Zhang,et al.  Preparation of porous hydroxyapatite scaffolds by combination of the gel-casting and polymer sponge methods. , 2003, Biomaterials.

[15]  Smadar Cohen,et al.  Tailoring the pore architecture in 3-D alginate scaffolds by controlling the freezing regime during fabrication. , 2002, Biomaterials.

[16]  J. Jansen,et al.  A new method to produce macropores in calcium phosphate cements. , 2002, Biomaterials.

[17]  Joseph Cesarano,et al.  Colloidal inks for directed assembly of 3-D periodic structures , 2002 .

[18]  R. Kandel,et al.  Porous calcium polyphosphate scaffolds for bone substitute applications -- in vitro characterization. , 2001, Biomaterials.

[19]  J. Hunt.  Pattern formation in solidification , 2001 .

[20]  J. Bossert,et al.  Preparation and properties of dense and porous calcium phosphate , 1999 .

[21]  J Amédée,et al.  Cellular biocompatibility and resistance to compression of macroporous beta-tricalcium phosphate ceramics. , 1998, Biomaterials.

[22]  Ted A. Bateman,et al.  Porous Materials for Bone Engineering , 1997 .

[23]  J. Klawitter,et al.  Application of porous ceramics for the attachment of load bearing internal orthopedic applications , 1971 .

[24]  Eduardo Saiz,et al.  Sintering and robocasting of -tricalcium phosphate scaVolds for orthopaedic applications , 2006 .

[25]  H. Yoshikawa,et al.  Novel hydroxyapatite ceramics with an interconnective porous structure exhibit superior osteoconduction in vivo. , 2002, Journal of biomedical materials research.

[26]  H. Aro,et al.  Pore diameter of more than 100 μm is not requisite for bone ingrowth in rabbits , 2001 .

[27]  M. Sefton,et al.  Tissue engineering. , 1998, Journal of cutaneous medicine and surgery.

[28]  Dean‐Mo Liu.  Influence of porosity and pore size on the compressive strength of porous hydroxyapatite ceramic , 1997 .

[29]  Vivek Dixit,et al.  Porous Materials for Tissue Engineering , 1997, Materials Science Forum.

[30]  J. Le Huec,et al.  Influence of porosity on the mechanical resistance of hydroxyapatite ceramics under compressive stress. , 1995, Biomaterials.

[31]  J. Vacanti,et al.  Tissue engineering : Frontiers in biotechnology , 1993 .