The impact of simulation studies on the distribution grid operation and planning in Cyprus

Simulation tools offer a wide range of prospective advantages that give utilities and system operators the ability to improve power quality and operational costs. The use of such tools can make the analysis/study of complex power networks simpler, giving valuable answers about the power quality behaviour of electricity networks in the presence of intermittent renewable energy generation and can help in reducing undesirable energy losses. In this work, steady-state simulations are performed by undertaking measurement investigations and model development in order to assess the impact of such studies on system planning and operation. By using DigSILENT PowerFactory, typical feeders of Nicosia district, Cyprus are realized into circuit form and simulated while considering demand and renewable energy production time series measurement data. The aim of the paper is to reveal the operational benefit of using design and analysis tools for proactive or corrective actions. From the simulations, it has been shown that network reconfiguration tasks lead to the reduction of power losses which can inevitably create an economic benefit for electricity utilities. In addition, simulation tools can help utilities meet challenging voltage regulation requirements/issues. One example of eliminating voltage violations through transformer tap optimization is also provided.

[1]  Venizelos Efthymiou,et al.  Voltage regulation via photovoltaic (PV) inverters in distribution grids with high PV penetration levels , 2012 .

[2]  Jenny Paulinder Reliability analysis of distribution network investments , 2013 .

[3]  Luis Ochoa,et al.  Minimizing Energy Losses: Optimal Accommodation and Smart Operation of Renewable Distributed Generation , 2011, IEEE Transactions on Power Systems.

[4]  Chanan Singh,et al.  DG integrated multistage distribution system expansion planning , 2011 .

[5]  M. H. Nehrir,et al.  Tools for Analysis and Design of Distributed Resources—Part II: Tools for Planning, Analysis and Design of Distribution Networks With Distributed Resources , 2011, IEEE Transactions on Power Delivery.

[6]  Marie-Cecile Alvarez-Herault,et al.  A Novel Hybrid Network Architecture to Increase DG Insertion in Electrical Distribution Systems , 2011, IEEE Transactions on Power Systems.

[7]  J. Partanen,et al.  Economic analysis of outage costs parameters and their implications on investment decisions , 2005, IEEE Power Engineering Society General Meeting, 2005.

[8]  N. C. Sahoo,et al.  Mono- and multi-objective planning of electrical distribution networks using particle swarm optimization , 2011, Appl. Soft Comput..

[9]  Arturo D. Alarcon-Rodriguez,et al.  Multi-objective planning of Distributed Energy Resources with probabilistic constraints , 2010, IEEE PES General Meeting.

[10]  Carmen L. T. Borges,et al.  Multistage expansion planning for active distribution networks under demand and Distributed Generation uncertainties , 2012 .

[11]  Venizelos Efthymiou,et al.  Simplified distribution grid model for power quality studies in the presence of photovoltaic generators , 2015 .

[12]  Bikash C. Pal,et al.  Distribution voltage control considering the impact of PV generation on tap changers and autonomous regulators , 2014, 2014 IEEE PES General Meeting | Conference & Exposition.

[13]  Johan Morren,et al.  REQUIREMENTS FOR ADVANCED DECISION SUPPORT TOOLS IN FUTURE DISTRIBUTION NETWORK PLANNING , 2013 .