Numerical studies on the failure process and associated microseismicity in rock under triaxial compression

Abstract In this paper, firstly the mesoscopic elemental mechanical model for elastic damage is developed and implemented into the rock and tool interaction code (R-T 2D ). Then the failure processes of a heterogeneous rock specimen subjected to a wide variety of confining pressures (0–80 MPa) are numerically investigated using the R-T 2D code. According to the simulated results, on the one hand, the numerical simulation reproduced some of the well-known phenomena observed by previous researchers in triaxial tests. Under uniaxial compression, rock failure is caused by a combination of axial splitting and shearing. Dilatancy and a post-failure stage with a descending load bearing capacity are the prominent characteristics of the failure. As the confining pressure increases, the extension of the failed sites is suppressed, but the individual failure sites become dense and link with each other to form a shear fracture plane. Correspondingly, the peak strength, the residual strength and the shear fracture plane angle increase, but the brittleness decreases. When the confining pressure is high enough, the specimen behaves in a plastic manner and a narrow shear fracture plane leads to its failure. The prominent characteristics are volume condensation, ductile cataclastic failure, and a constant load bearing capacity with increasing strain. On the other hand, the numerical simulation revealed some new phenomena. The highest microseismicity events occur in the post-failure stage instead of the maximal stress, and most of the microseismicity energies are released in the failure localization process. As the confining pressure increases, the microseismicity events in the non-linear deformation stage increase dramatically and the ratio between the energies dissipated at the non-linear deformation stage and those dissipated in the whole loading process increases correspondingly. Therefore, it is concluded that the developed mesoscopic elemental mechanical model for elastic damage is able to reproduce accurately the failure characteristics in loading rock specimens under triaxial conditions, and the numerical modelling can furthermore obtain some new clarifications of the rock fracture process.

[1]  S. C. Blair,et al.  Analysis of compressive fracture in rock using statistical techniques: Part I. A non-linear rule-based model , 1998 .

[2]  P. Meredith,et al.  Microcrack formation and material softening in rock measured by monitoring acoustic emissions , 1993 .

[3]  Miguel Cerrolaza,et al.  Boundary elements and damage mechanics to analyze excavations in rock mass , 1997 .

[4]  Per-Arne Lindqvist,et al.  Rock fragmentation by indentation and disc cutting : some theoretical and experimental studies , 1982 .

[5]  M. Ramez.  Fractures and the strength of a sandstone under triaxial compression , 1967 .

[6]  D. Lockner,et al.  Quasi-static fault growth and shear fracture energy in granite , 1991, Nature.

[7]  Liu Hongyuan,et al.  Numerical Modelling of the Rock Fracture Process Under Mechanical Loading , 2003 .

[8]  J. Franklin,et al.  SUGGESTED METHODS FOR DETERMINING THE STRENGTH OF ROCK MATERIALS IN TRIAXIAL COMPRESSION: REVISED VERSION , 1983 .

[9]  S. Kou,et al.  Some Basic Problems in Rock Breakage by Blasting and by Indentation , 1995 .

[10]  W. Weibull.  A Statistical Distribution Function of Wide Applicability , 1951 .

[11]  C. A. Tang,et al.  Coupled analysis of flow, stress and damage (FSD) in rock failure , 2002 .

[12]  M. Paterson.  Experimental Rock Deformation: The Brittle Field , 1978 .

[13]  D. Lockner,et al.  The role of microcracking in shear-fracture propagation in granite , 1995 .

[14]  M. Hori,et al.  Micromechanical analysis on deterioration due to freezing and thawing in porous brittle materials , 1998 .

[15]  Teng-fong Wong,et al.  The transition from brittle faulting to cataclastic flow in porous sandstones: Mechanical deformation , 1997 .

[16]  Joseph F Labuz,et al.  Plane-strain compression of rock-like materials , 1996 .

[17]  Jian Zhao,et al.  Applicability of Mohr–Coulomb and Hoek–Brown strength criteria to the dynamic strength of brittle rock , 2000 .

[18]  E. T. Brown,et al.  Rock Mechanics: For Underground Mining , 1985 .

[19]  Shaoquan Kou,et al.  Numerical simulation of the fracture process in cutting heterogeneous brittle material , 2002 .

[20]  R. Kranz.  Microcracks in rocks: a review , 1983 .

[21]  Pierre Bésuelle,et al.  Experimental characterisation of the localisation phenomenon inside a Vosges sandstone in a triaxial cell , 2000 .

[22]  M. Shimada,et al.  Two types of brittle fracture of silicate rocks under confining pressure and their implications in the earth's crust , 1990 .

[23]  C. Tang,et al.  Numerical simulation of progressive rock failure and associated seismicity , 1997 .

[24]  Dusan Krajcinovic,et al.  A micromechanical model for concrete in compression , 1988 .

[25]  Kinichiro Kusunose,et al.  Three-dimensional observations of faulting process in Westerly granite under uniaxial and triaxial conditions by X-ray CT scan , 1999 .

[26]  Z. T. Bieniawski,et al.  Suggested methods for determining the uniaxial compressive strength and deformability of rock materials: Part 1. Suggested method for determination of the uniaxial compressive strength of rock materials , 1979 .

[27]  Teng-fong Wong,et al.  Micromechanics of compressive failure and spatial evolution of anisotropic damage in Darley Dale sandstone , 2000 .

[28]  Leslie George Tham,et al.  Numerical studies of the influence of microstructure on rock failure in uniaxial compression — Part I: effect of heterogeneity , 2000 .

[29]  Reconsolidation of crushed rock fragments under a button indenter , 1980 .

[30]  Philip G. Meredith,et al.  Microcracking during triaxial deformation of porous rocks monitored by changes in rock physical properties, I. Elastic-wave propagation measurements on dry rocks , 1995 .

[31]  W. R. Wawersik,et al.  A study of brittle rock fracture in laboratory compression experiments , 1970 .

[32]  J. P. Harrison,et al.  Application of a local degradation model to the analysis of brittle fracture of laboratory scale rock specimens under triaxial conditions , 2002 .

[33]  Robert G. Lundquist.  Hemispherical Indentation And The Design Of "Button Bits" For Percussive Drilling , 1981 .

[34]  J. Ju,et al.  Micromechanical Damage Models for Brittle Solids. Part II: Compressive Loadings , 1991 .

[35]  Jean Lemaitre,et al.  A Course on Damage Mechanics , 1992 .

[36]  J. P. Harrison,et al.  Development of a local degradation approach to the modelling of brittle fracture in heterogeneous rocks , 2002 .

[37]  B. N. Whittaker,et al.  Rock Fracture Mechanics: Principles, Design and Applications , 1992 .

[38]  C. Fairhurst,et al.  Influence of pore pressure on the deformation behaviour of saturated rocks : 4F, 27R. Proc. 3rd Congress ISRM, Denver, 1974, vol 2 part A, P538–644 , 1976 .

[39]  E. T. Brown,et al.  Underground excavations in rock , 1980 .

[40]  Paul Tapponnier,et al.  Development of stress-induced microcracks in Westerly Granite , 1976 .