Research on a Nonlinear Dynamic Incipient Fault Detection Method for Rolling Bearings

The incipient fault detection technology of rolling bearings is the key to ensure its normal operation and is of great significance for most industrial processes. However, the vibration signals of rolling bearings are a set of time series with non-linear and timing correlation, and weak incipient fault characteristics of rolling bearings bring about obstructions for the fault detection. This paper proposes a nonlinear dynamic incipient fault detection method for rolling bearings to solve these problems. The kernel function and the moving window algorithm are used to establish a non-linear dynamic model, and the real-time characteristics of the system are obtained. At the same time, the deep decomposition method is used to extract weak fault characteristics under the strong noise, and the incipient failures of rolling bearings are detected. Finally, the validity and feasibility of the scheme are verified by two simulation experiments. Experimental results show that the fault detection rate based on the proposed method is higher than 85% for incipient fault of rolling bearings, and the detection delay is almost zero. Compared with the detection performance of traditional methods, the proposed nonlinear dynamic incipient fault detection method is of better accuracy and applicability.

[1]  Yi Wang,et al.  Rolling Bearing Fault Detection of Civil Aircraft Engine Based on Adaptive Estimation of Instantaneous Angular Speed , 2020, IEEE Transactions on Industrial Informatics.

[2]  Li Tang,et al.  Adaptive neural control for switched non-linear systems with multiple tracking error constraints , 2019, IET Signal Process..

[3]  Shaocheng Tong,et al.  Barrier Lyapunov Function-Based Adaptive Fuzzy FTC for Switched Systems and Its Applications to Resistance–Inductance–Capacitance Circuit System , 2020, IEEE Transactions on Cybernetics.

[4]  Yi Zhang,et al.  Incipient fault detection of rolling bearing using maximum autocorrelation impulse harmonic to noise deconvolution and parameter optimized fast EEMD. , 2019, ISA transactions.

[5]  Huaitao Shi,et al.  Influence of uneven loading condition on the sound radiation of starved lubricated full ceramic ball bearings , 2019, Journal of Sound and Vibration.

[6]  Hua Li,et al.  Research on bearing fault feature extraction based on singular value decomposition and optimized frequency band entropy , 2019, Mechanical Systems and Signal Processing.

[7]  Aiqing Chen,et al.  Time-Varying Tan-Type Barrier Lyapunov Function-Based Adaptive Fuzzy Control for Switched Systems With Unknown Dead Zone , 2019, IEEE Access.

[8]  Serkan Kiranyaz,et al.  A Generic Intelligent Bearing Fault Diagnosis System Using Compact Adaptive 1D CNN Classifier , 2018, Journal of Signal Processing Systems.

[9]  Yongbo Li,et al.  Health Condition Monitoring and Early Fault Diagnosis of Bearings Using SDF and Intrinsic Characteristic-Scale Decomposition , 2016, IEEE Transactions on Instrumentation and Measurement.

[10]  X. Bai,et al.  Model-based uneven loading condition monitoring of full ceramic ball bearings in starved lubrication , 2020 .

[11]  Kun Yu,et al.  Frobenius and nuclear hybrid norm penalized robust principal component analysis for transient impulsive feature detection of rolling bearings. , 2019, ISA transactions.

[12]  Jianfeng Ma,et al.  Research on Remaining Useful Life Prediction of Rolling Element Bearings Based on Time-Varying Kalman Filter , 2020, IEEE Transactions on Instrumentation and Measurement.

[13]  Reza Malekian,et al.  Development and trend of condition monitoring and fault diagnosis of multi-sensors information fusion for rolling bearings: a review , 2018 .

[14]  Gang Tang,et al.  Underdetermined blind separation of bearing faults in hyperplane space with variational mode decomposition , 2019, Mechanical Systems and Signal Processing.

[15]  Ling Wang,et al.  Further understanding of rolling contact fatigue in rolling element bearings - A review , 2019, Tribology International.

[16]  Huiyu Zhou,et al.  CNN and KPCA-Based Automated Feature Extraction for Real Time Driving Pattern Recognition , 2019, IEEE Access.

[17]  Kun Yu,et al.  A Combined Polynomial Chirplet Transform and Synchroextracting Technique for Analyzing Nonstationary Signals of Rotating Machinery , 2020, IEEE Transactions on Instrumentation and Measurement.

[18]  Li Tang,et al.  Time-varying Barrier Lyapunov Function Based Adaptive Neural Controller Design for Nonlinear Pure-feedback Systems with Unknown Hysteresis , 2019, International Journal of Control, Automation and Systems.

[19]  Zehui Mao,et al.  Deep PCA Based Real-Time Incipient Fault Detection and Diagnosis Methodology for Electrical Drive in High-Speed Trains , 2018, IEEE Transactions on Vehicular Technology.

[20]  Yinsheng Chen,et al.  A Novel Rolling Bearing Fault Diagnosis and Severity Analysis Method , 2019, Applied Sciences.

[21]  Lin Li,et al.  Ekman boundary layer mass transfer mechanism of free sink vortex , 2020 .

[22]  Huaitao Shi,et al.  Rolling Bearing Initial Fault Detection Using Long Short-Term Memory Recurrent Network , 2019, IEEE Access.

[23]  Wentao Mao,et al.  A New Online Detection Approach for Rolling Bearing Incipient Fault via Self-Adaptive Deep Feature Matching , 2020, IEEE Transactions on Instrumentation and Measurement.

[24]  Kai Song,et al.  A Fault Diagnosis and Reconfiguration Strategy for Self-Validating Hydrogen Sensor Array Based on MWPCA and ELM , 2019, IEEE Access.

[25]  Yi Qin,et al.  Kurtogram manifold learning and its application to rolling bearing weak signal detection , 2018, Measurement.

[26]  Yongmin Liu,et al.  Application of weighted contribution rate of nonlinear output frequency response functions to rotor rub-impact , 2020 .

[27]  Bernhard Schölkopf,et al.  Nonlinear Component Analysis as a Kernel Eigenvalue Problem , 1998, Neural Computation.

[28]  Czeslaw T. Kowalski,et al.  Selected Rolling Bearing Fault Diagnostic Methods in Wheel Embedded Permanent Magnet Brushless Direct Current Motors , 2019 .

[29]  Yi Wang,et al.  ReLTanh: An activation function with vanishing gradient resistance for SAE-based DNNs and its application to rotating machinery fault diagnosis , 2019, Neurocomputing.

[30]  Qingkai Han,et al.  Modeling of amplitude-dependent damping characteristics of fiber reinforced composite thin plate , 2020 .

[31]  Dong Wang,et al.  Dynamic Bayesian wavelet transform: New methodology for extraction of repetitive transients , 2017 .

[32]  Jong-Myon Kim,et al.  Detecting and Learning Unknown Fault States by Automatically Finding the Optimal Number of Clusters for Online Bearing Fault Diagnosis , 2019, Applied Sciences.

[33]  Qicai Zhou,et al.  Degradation State Recognition of Rolling Bearing Based on K-Means and CNN Algorithm , 2019 .

[34]  Xianzhi Wang,et al.  Early fault diagnosis of rolling bearings based on hierarchical symbol dynamic entropy and binary tree support vector machine , 2018, Journal of Sound and Vibration.

[35]  Baoping Tang,et al.  A novel optimized multi-kernel relevance vector machine with selected sensitive features and its application in early fault diagnosis for rolling bearings , 2020 .