Fault Detection and Isolation in Centrifugal Pumps

[1]  Manfred Glesner,et al.  Impeller integrated measurement of cavitation erosive aggressiveness , 2002 .

[2]  P. Garcia,et al.  Diagnostics of induction machines using the zero sequence voltage , 2004, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..

[3]  Marcel Staroswiecki,et al.  Adaptive observer design for robust fault estimation , 2002, Int. J. Syst. Sci..

[4]  F.C. Trutt,et al.  On-line condition monitoring of induction motors , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[5]  Bernd Stoffel,et al.  MEASUREMENT OF CAVITATION EROSIVE AGGRESSIVENESS BY MEANS OF STRUCTURE BORN NOISE , 2001 .

[6]  H. Rasmussen,et al.  Estimation of stator winding faults in induction motors using an adaptive observer scheme , 2004, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..

[7]  Rolf Isermann,et al.  Trends in the Application of Model Based Fault Detection and Diagnosis of Technical Processes , 1996 .

[8]  F. Briz,et al.  On-line stator winding fault diagnosis in inverter-fed AC machines using high frequency signal injection , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[9]  Rajesh Rajamani,et al.  Adaptive observers for active automotive suspensions: theory and experiment , 1995, IEEE Trans. Control. Syst. Technol..

[10]  Mau-Hsiang Shih,et al.  Solution of the Boolean Markus-Yamabe Problem , 1999 .

[11]  H. Rasmussen,et al.  Model based fault diagnosis in a centrifugal pump application using structural analysis , 2004, Proceedings of the 2004 IEEE International Conference on Control Applications, 2004..

[12]  M. Staroswiecki.  QUANTITATIVE AND QUALITATIVE MODELS FOR FAULT DETECTION AND ISOLATION , 2000 .

[13]  P. Frank,et al.  Survey of robust residual generation and evaluation methods in observer-based fault detection systems , 1997 .

[14]  T.G. Habetler,et al.  Motor bearing damage detection using stator current monitoring , 1994, Proceedings of 1994 IEEE Industry Applications Society Annual Meeting.

[15]  Marcel Staroswiecki,et al.  Analytical redundancy relations for fault detection and isolation in algebraic dynamic systems , 2001, Autom..

[16]  José Ragot,et al.  Data validation using interval algebra , 1998 .

[17]  S. Stasi,et al.  Analysis techniques for detection of IM broken rotor bars after supply disconnection , 2003 .

[18]  Werner Leonhard,et al.  Control of Electrical Drives , 1990 .

[19]  Thomas G. Habetler,et al.  Stator winding turn-fault detection for closed-loop induction motor drives , 2002 .

[20]  Michèle Basseville,et al.  Detection of Abrupt Changes: Theory and Applications. , 1995 .

[21]  William James Premerlani,et al.  A new approach to on-line turn fault detection in AC motors , 1996, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting.

[22]  C. Gerada,et al.  The implications of winding faults in induction motor drives , 2004, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..

[23]  Hans Henrik Niemann,et al.  Fault estimation—a standard problem approach , 2002 .

[24]  Henrik Rasmussen.  Self-tuning Torque Control of Induction Motors for High Performance Applications , 1995 .

[25]  Thomas G. Habetler,et al.  An amplitude modulation detector for fault diagnosis in rolling element bearings , 2002, IEEE 2002 28th Annual Conference of the Industrial Electronics Society. IECON 02.

[26]  Jennie Si,et al.  Fault isolation filter design for linear systems , 1994, AIAA/IEEE Digital Avionics Systems Conference. 13th DASC.

[27]  T. G. Habetler,et al.  Insulation failure prediction in induction machines using line-neutral voltages , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.

[28]  P. Frank,et al.  Deterministic nonlinear observer-based approaches to fault diagnosis: A survey , 1997 .

[29]  Paolo Nesi,et al.  Real-Time Detection of Cavitation for Hydraulic Turbomachines , 1998, Real Time Imaging.

[30]  Thomas A. Lipo,et al.  Analysis of a concentrated winding induction machine for adjustable speed drive applications. I. Motor analysis , 1991 .

[31]  R. M. Tallam,et al.  A robust, on-line turn-fault detection technique for induction machines based on monitoring the sequence component impedance matrix , 2003 .

[32]  Janos Gertler,et al.  Fault detection and diagnosis in engineering systems , 1998 .

[33]  Jorge Parrondo,et al.  Development of a predictive maintenance system for a centrifugal pump , 1998 .

[34]  E. Wiedenbrug,et al.  Impulse testing and turn insulation deterioration in electric motors , 2003, Conference Record of the 2003 Annual Pulp and Paper Industry Technical Conference, 2003..

[35]  P.J. Unsworth,et al.  Fuzzy logic system to detect pump faults from motor current spectra , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[36]  Michel Kinnaert,et al.  Diagnosis and Fault-Tolerant Control , 2004, IEEE Transactions on Automatic Control.

[37]  Jens Friedrichs,et al.  Rotating Cavitation in a Centrifugal Pump Impeller of Low Specific Speed , 2002 .

[38]  José Ragot,et al.  Multi-fault detection of systems with bounded uncertainties , 2001 .

[39]  Alberto Isidori,et al.  A geometric approach to nonlinear fault detection and isolation , 2000, IEEE Trans. Autom. Control..

[40]  Wei Lin,et al.  Fault detection and diagnosis of rotating machinery , 2000, IEEE Trans. Ind. Electron..

[41]  S. A. Bøgh,et al.  Fault Tolerant Control Systems , 1997 .

[42]  Jan Tommy Gravdahl,et al.  Centrifugal compressor surge and speed control , 1999, IEEE Trans. Control. Syst. Technol..

[43]  Hamid A. Toliyat,et al.  Novel frequency-domain-based technique to detect stator interturn faults in induction machines using stator-induced voltages after switch-off , 2002 .

[44]  Jie Chen,et al.  Robust Model-Based Fault Diagnosis for Dynamic Systems , 1998, The International Series on Asian Studies in Computer and Information Science.

[45]  John Alexander Steel,et al.  Detection of incipient cavitation in pumps using acoustic emission , 1997 .

[46]  Rolf Isermann,et al.  Supervision, fault-detection and fault-diagnosis methods — An introduction , 1997 .

[47]  Donal O'Shea,et al.  Ideals, varieties, and algorithms - an introduction to computational algebraic geometry and commutative algebra (2. ed.) , 1997, Undergraduate texts in mathematics.

[48]  G. Besançon.  Remarks on nonlinear adaptive observer design , 2000 .

[49]  Jim Penman,et al.  Induction machine condition monitoring with higher order spectra , 2000, IEEE Trans. Ind. Electron..

[50]  Paul C. Krause,et al.  Analysis of electric machinery , 1987 .

[51]  T. Lipo,et al.  Vector Control and Dynamics of AC Drives , 1996 .

[52]  Michael J. Devaney,et al.  Motor bearing damage detection via wavelet analysis of the starting current transient , 2001, IMTC 2001. Proceedings of the 18th IEEE Instrumentation and Measurement Technology Conference. Rediscovering Measurement in the Age of Informatics (Cat. No.01CH 37188).

[53]  Rafael Wisniewski,et al.  A Realization Approach for Residual Expressions , 2006 .

[54]  Ramon E. Moore.  Methods and applications of interval analysis , 1979, SIAM studies in applied mathematics.

[55]  M. Arkan,et al.  Induction motor fault detection by space vector angular fluctuation , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[56]  Charles R. Sullivan,et al.  Models for induction machines with magnetic saturation of the main flux path , 1992 .

[57]  Erik Frisk,et al.  Lowering Orders of Derivatives in Non-linear Consistency Relations : Theory and Simulation Examples , 2003 .

[58]  D. K. Perovic,et al.  Online stator fault diagnosis in induction motors , 2001 .

[59]  F. Filippetti,et al.  Quantitative evaluation of induction motor broken bars by means of electrical signature analysis , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[60]  G.C. Soukup,et al.  Cause and analysis of stator and rotor failures in 3-phase squirrel cage induction motors , 1991, Conference Record of 1991 Annual Pulp and Paper Industry Technical Conference.

[61]  Gojko Joksimovic,et al.  The detection of inter-turn short circuits in the stator windings of operating motors , 2000, IEEE Trans. Ind. Electron..

[62]  R. Rajamani,et al.  A systematic approach to adaptive observer synthesis for nonlinear systems , 1997, IEEE Trans. Autom. Control..

[63]  Jakob Stoustrup,et al.  Fault detection for nonlinear systems - a standard problem approach , 1998, Proceedings of the 37th IEEE Conference on Decision and Control (Cat. No.98CH36171).

[64]  Roozbeh Izadi-Zamanabadi.  Fault-tolerant Supervisory Control: System Analysis and Logic Design , 1999 .

[65]  Jie Chen,et al.  Observer-based fault detection and isolation: robustness and applications , 1997 .

[66]  Karl Johan Åström,et al.  Control of complex systems , 2001 .