Structural shape optimization — a survey

[1]  Noboru Kikuchi,et al.  Adaptive finite element methods for shape optimization of linearly elastic structures , 1986 .

[2]  M. E. Botkin,et al.  Shape optimization of three-dimensional folded-plate structures , 1985 .

[3]  V. Braibant,et al.  An approximation-concepts approach to shape optimal design , 1985 .

[4]  E. J. Haug,et al.  Numerical Considerations in Structural Component Shape Optimization , 1985 .

[5]  M. E. Botkin,et al.  THE RELATIONSHIP BETWEEN THE VARIATIONAL APPROACH AND THE IMPLICIT DIFFERENTIATION APPROACH TO SHAPE DESIGN SENSITIVITIES , 1985 .

[6]  M. E. Botkin,et al.  Structural shape optimization with geometric description and adaptive mesh refinement , 1985 .

[7]  J. W. Hou,et al.  COMPUTATIONAL METHOD FOR SHAPE OPTIMIZATION. , 1985 .

[8]  Kyung K. Choi,et al.  Shape Design Sensitivity Analysis of Displacement and Stress Constraints , 1985 .

[9]  Kyung K. Choi,et al.  Accuracy of Finite Element Based Shape Design Sensitivity Analysis , 1985 .

[10]  Claude Fleury,et al.  Shape Optimal Design - An Approach Matching C.A.D. and Optimization Concepts , 1985 .

[11]  Kyung K. Choi,et al.  Shape design sensitivity analysis of built-up structures , 1986 .

[12]  J. W. Hou,et al.  Shape Optimization of Elastic Hollow Bars , 1984 .

[13]  Kyung K. Choi,et al.  Shape Optimal Structural Design Using Boundary Elements and Minimum Compliance Techniques , 1984 .

[14]  Noboru Kikuchi,et al.  Optimal shape remodelling of linearly elastic plates using finite element methods , 1984 .

[15]  Kyung K. Choi,et al.  Shape Optimal Design of an Engine Connecting Rod , 1984 .

[16]  R. R. Kumar,et al.  Optimum Openings in Circular Cylindrical Shells Under Uniaxial Tension and Torsion by Conformal Transformation , 1984 .

[17]  V. Braibant,et al.  Shape optimal design using B-splines , 1984 .

[18]  E. J. Haug,et al.  Optimization of the Geometry of Shafts Using Boundary Elements , 1984 .

[19]  C. Fleury,et al.  Shape optimal design - A performing C.A.D. oriented formulation , 1984 .

[20]  Biren Prasad,et al.  Optimal structural remodeling of multi-objective systems , 1984 .

[21]  Zenon Mróz,et al.  Variational approach by means of adjoint systems to structural optimization and sensitivity analysis—II: Structure shape variation , 1984 .

[22]  S. K. Dhir.  Optimization of openings in plates under plane stress , 1983 .

[23]  P. Trompette,et al.  Optimal Shape Design of Turbine Blades , 1983 .

[24]  B. Rousselet,et al.  Shape design sensitivity of a membrane , 1983 .

[25]  B. H. V. Topping,et al.  Shape Optimization of Skeletal Structures: A Review , 1983 .

[26]  E. Schnack.  Optimal Designing of Notched Structures without Gradient Computation , 1983 .

[27]  M. Botkin,et al.  Shape optimization of two-dimensional structures with geometric problem description and adaptive mesh refinement , 1983 .

[28]  Edward J. Haug,et al.  Shape Optimization of a Solid of Revolution , 1983 .

[29]  Kyung K. Choi,et al.  Shape Design Sensitivity Analysis of Elastic Structures , 1983 .

[30]  M. Week,et al.  An Efficient Technique in Shape Optimization , 1983 .

[31]  Noboru Kikuchi,et al.  Design of an Optimal Grid for Finite Element Methods , 1983 .

[32]  K. Mizukami,et al.  Minimum-weight design with displacements constraints in 2-dimensional elasticity , 1983 .

[33]  Klaus Wassermann,et al.  Three-Dimensional Shape Optimization of Arch Dams with Prescribed Shape Functions*, † , 1983 .

[34]  Raymond H. Plaut,et al.  Optimal Forms of Shallow Arches with Respect to Vibration and Stability , 1983 .

[35]  N. Kikuchi,et al.  Optimal Modification of Shape for Two-Dimensional Elastic Bodies , 1983 .

[36]  R. Richards,et al.  Neutral Holes: Theory and Design , 1982 .

[37]  V. Vasil’ev,et al.  Optimum shapes and paths of reinforcement in rotating composite shells , 1982 .

[38]  S. Dhir.  Optimization of openings in plates , 1982 .

[39]  M. Imam.  Three‐dimensional shape optimization , 1982 .

[40]  N. Naik,et al.  Optimum hole shape determination in infinite orthotropic plates under inplane loading by conformal transformation , 1982 .

[41]  R. R. Kumar,et al.  Optimum hole shapes in circular cylindrical shells under tension and torsion , 1982 .

[42]  L. Wheeler,et al.  On voids of minimum stress concentration , 1982 .

[43]  Robert V. Kohn,et al.  Optimal design for torsional rigidity , 1982 .

[44]  L. Walpole,et al.  Optimisation of the torsional rigidity of axisymmetric hollow shafts , 1982 .

[45]  Paull Pedersen,et al.  Design for Minimum Stress Concentration by Finite Elements and Linear Programming , 1982 .

[46]  Edward J. Haug,et al.  Design Sensitivity Analysis in Structural Mechanics. III. Effects of Shape Variation , 1982 .

[47]  M. E. Botkin,et al.  AUTOMATED DESIGN FOR AUTOMOTIVE STRUCTURES , 1982 .

[48]  S. K. Dhir.  Optimization in a Class of Hole Shapes in Plate Structures , 1981 .

[49]  Tomasz Wierzbicki,et al.  Shape Optimization of Sheet Metal Structures against Crash , 1981 .

[50]  W. Spillers,et al.  Shape Optimization: Finite Element Example , 1981 .

[51]  A. J. Durelli,et al.  Optimization of hole shapes in circular cylindrical shells under axial tension , 1981 .

[52]  M. E. Botkin,et al.  Shape Optimization of Plate and Shell Structures , 1981 .

[53]  A. Durelli,et al.  Stress Distribution Around a Circular Hole in Square Plates, Loaded Uniformly in the Plane, on Two Opposite Sides of the Square , 1981 .

[54]  A. Durelli,et al.  Optimum shapes of central holes in square plates subjected to uniaxial uniform load , 1981 .

[55]  Jean Cea,et al.  Problems of Shape Optimal Design , 1981 .

[56]  Jean-Paul Zolésio,et al.  The Material Derivative (or Speed) Method for Shape Optimization , 1981 .

[57]  E. Haug,et al.  Design Sensitivity Analysis of Shape Variation , 1981 .

[58]  E. Haug,et al.  On the Optimum Shape of Columns , 1981 .

[59]  Nick V. Banichuk,et al.  Optimality Conditions and Analytical Methods of Shape Optimization , 1981 .

[60]  K. K. Choi,et al.  Shape Optimal Design of Elastic Structures , 1981 .

[61]  Y. Seguchi,et al.  Shape Determination of Structures Based on the Inverse Variational Principle/the Finite Element Approach, , 1981 .

[62]  J. Middleton,et al.  Optimal Shape Design to Minimize Stress Concentration Factors in Pressure Vessel Components , 1981 .

[63]  Juhachi Oda,et al.  Pattern Transformation Method for Shape Optimization and its Application to Spoked Rotary Disks , 1981 .

[64]  P. Trompette,et al.  OPTIMAL SHAPE DESIGN OF TURBINE AND COMPRESSOR BLADES , 1981 .

[65]  Ji Oh Song,et al.  Application of Optimization to Aircraft Engine Disk Synthesis , 1981 .

[66]  T. Altuzarra,et al.  Interactive Optimum Design System , 1981 .

[67]  P. Trompette,et al.  Two-dimensional shape optimal design by the finite element method , 1980 .

[68]  K. Dems,et al.  Multiparameter shape optimization of elastic bars in torsion , 1980 .

[69]  Y. Seguchi,et al.  Shape Determination Problems of Structures by the Inverse Variational Principle : 2nd Report, Buckling and Vibration Problems , 1980 .

[70]  M. L. Luchi,et al.  An interactive optimization procedure applied to the design of gas turbine discs , 1980 .

[71]  S. S. Bhavikatti,et al.  Optimum shape design of rotating disks , 1980 .

[72]  Zenon Mróz,et al.  Optimal Shape Design of Multicomposite Structures , 1980 .

[73]  Raphael T. Haftka,et al.  Optimal Structural Design with Plate Finite Elements , 1979 .

[74]  A. J. Durelli,et al.  OPTIMUM HOLE SHAPES IN FINITE PLATES UNDER UNIAXIAL LOAD , 1979 .

[75]  J. E. Taylor,et al.  On optimal structural remodeling , 1979 .

[76]  Juhachi Oda,et al.  On a Technique to Obtain an Optimum Strength Shape by the Finite Element Method : Application to the Problems under Body Force , 1979 .

[77]  Eckart Schnack,et al.  An optimization procedure for stress concentrations by the finite element technique , 1979 .

[78]  Sarp Adali,et al.  Optimal shape and non-homogeneity of a non-uniformly compressed column☆ , 1979 .

[79]  Yoji Umetani,et al.  Shape Optimization for Beams Subject to Displacement Restrictions on the Basis of the Growing-Reforming Procedure , 1978 .

[80]  Byung Man Kwak,et al.  Contcat stress minimization by contour design , 1978 .

[81]  Zenon Mróz,et al.  Multiparameter structural shape optimization by the finite element method , 1978 .

[82]  Edward J. Haug,et al.  Two-dimensional shape optimal design† , 1978 .

[83]  Juhachi Oda,et al.  On a Technique to Obtain an Optimum Strength Shape of an Axisymmetric Body by the Finite Element Method , 1977 .

[84]  D.R.J. Owen,et al.  Automated design optimization to minimize shearing stress in axisymmetric pressure vessels , 1977 .

[85]  Bhushan Lal Karihaloo,et al.  Minimum-weight design of hollow cylinders for given lower bounds on torsional and flexural rigidities , 1977 .

[86]  N. V. Banichuk,et al.  Optimality conditions in the problem of seeking the hole shapes in elastic bodies: PMM vol. 41, n≗ 5, 1977, pp. 920–925 , 1977 .

[87]  Earl R. Barnes,et al.  The shape of the strongest column and some related extremal eigenvalue problems , 1977 .

[88]  Shigeoki Hirai,et al.  An Adaptive Shape Optimization Method for Structural Material Using the Growing-Reforming Procedure , 1976 .

[89]  E. L. Gurvitch.  On isoperimetric problems for domains with partly known boundaries , 1976 .

[90]  R. S. Nizza.  Shape optimization of disc-type flywheels , 1976 .

[91]  L. Wheeler,et al.  On the role of constant-stress surfaces in the problem of minimizing elastic stress concentration , 1976 .

[92]  N. V. Banichuk,et al.  Minimum-weight design of multi-purpose cylindrical bars , 1976 .

[93]  Erik Steen Kristensen,et al.  On the optimum shape of fillets in plates subjected to multiple in‐plane loading cases , 1976 .

[94]  Juhachi Oda,et al.  On a Technique to Obtain an Optimum Strength Shape by the Finite Element Method , 1976 .

[95]  N. V. Banichuk,et al.  Optimization of elastic bars in torsion , 1976 .

[96]  L. M. Kurshin,et al.  Determination of the shapes of doubly-connected bar sections of maximum torsional stiffness: PMM vol. 40, n≗ 6, 1976, pp. 1078–1084 , 1976 .

[97]  O. C. Zienkiewicz,et al.  Optimization of shape to minimize stress concentration , 1975 .

[98]  N. Banichuk.  On a variational problem with unknown boundaries and the determination of optimal shapes of elastic bodies: PMM vol. 39, n≗ 6, 1975, pp. 1082–1092 , 1975 .

[99]  V. Tvergaard,et al.  On the Optimum Shape of a Fillet in a Flat Bar with Restrictions , 1975 .

[100]  M. Farshad.  Optimum shape of continuous columns , 1974 .

[101]  C. V. Ramakrishnan,et al.  Structural Shape Optimization Using Penalty Functions , 1974 .

[102]  G. P. Cherepanov.  Inverse problems of the plane theory of elasticity: PMM vol. 38, n≗ 6, 1974, pp. 963–979 , 1974 .

[103]  M. Farshad,et al.  Optimum shape of columns with general conservative end loading , 1973 .

[104]  W. J. Stroud,et al.  Automated preliminary design of simplified wing structures to satisfy strength and flutter requirements , 1972 .

[105]  J. Keller.  The shape of the strongest column , 1960 .