Densification behavior and mechanical properties of nanocrystalline TiC reinforced 316L stainless steel composite parts fabricated by selective laser melting

[1]  Jenn‐Ming Yang,et al.  Rapid fabrication of bulk-form TiB2/316L stainless steel nanocomposites with novel reinforcement architecture and improved performance by selective laser melting , 2016 .

[2]  D. Grzesiak,et al.  Selective laser melting of TiC reinforced 316L stainless steel matrix nanocomposites: Influence of starting TiC particle size and volume content , 2016 .

[3]  Jenn‐Ming Yang,et al.  Nanocrystalline TiC-reinforced H13 steel matrix nanocomposites fabricated by selective laser melting ☆ , 2016 .

[4]  Pengpeng Yuan,et al.  Particulate migration behavior and its mechanism during selective laser melting of TiC reinforced Al matrix nanocomposites , 2015 .

[5]  YaChao Wang,et al.  Reinforcing Inconel 718 Superalloy by Nano-TiC Particles in Selective Laser Melting , 2015 .

[6]  Wei Li,et al.  Selective laser melting of stainless-steel/nano-hydroxyapatite composites for medical applications: Microstructure, element distribution, crack and mechanical properties , 2015 .

[7]  D. Gu,et al.  Selective laser melting of in-situ Al4SiC4 + SiC hybrid reinforced Al matrix composites: Influence of starting SiC particle size , 2015 .

[8]  Zhijian Shen,et al.  Transformation of austenite to duplex austenite-ferrite assembly in annealed stainless steel 316L consolidated by laser melting , 2015 .

[9]  R. Poprawe,et al.  Densification behavior, microstructure evolution, and wear property of TiC nanoparticle reinforced AlSi10Mg bulk-form nanocomposites prepared by selective laser melting , 2015 .

[10]  Johann Sienz,et al.  Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting , 2014, The International Journal of Advanced Manufacturing Technology.

[11]  I. Yadroitsev,et al.  Microstructure and properties of intermetallic composite coatings fabricated by selective laser melting of Ti–SiC powder mixtures , 2014 .

[12]  M. Lima,et al.  Microstructure and mechanical behavior of laser additive manufactured AISI 316 stainless steel stringers , 2014 .

[13]  H. Liao,et al.  Characterisations of TiC particle reinforced FeAl composite part fabricated by selective laser melting , 2014 .

[14]  Y. Shin,et al.  Microstructure and wear properties of laser-deposited functionally graded Inconel 690 reinforced with TiC , 2012 .

[15]  R. Poprawe,et al.  Selective laser melting of TiC/Ti bulk nanocomposites: Influence of nanoscale reinforcement , 2012 .

[16]  M. Mathisen.  In-Situ Tensile Testing Combined with EBSD Analysis of Ti-6Al-4V Samples from Components Fabricated by Additive Layer Manufacture , 2012 .

[17]  F. Caiazzo,et al.  Evolution of Direct Selective Laser Sintering of Metals , 2011 .

[18]  P. Jerrard.  Selective Laser Melting of Advanced Metal Alloys for Aerospace Applications , 2011 .

[19]  Gary J. Cheng,et al.  Laser engineered multilayer coating of biphasic calcium phosphate/titanium nanocomposite on metal substrates. , 2011, ACS Applied Materials and Interfaces.

[20]  Li Wang,et al.  Densification behavior of gas and water atomized 316L stainless steel powder during selective laser melting , 2010 .

[21]  Liang Hao,et al.  Selective laser melting of a stainless steel and hydroxyapatite composite for load-bearing implant development , 2009 .

[22]  H. Gülsoy.  Production of injection moulded 316L stainless steels reinforced with TiC(N) particles , 2008 .

[23]  Guo Zhenwen.  Friction wear behaviors of 316L stainless steel/Y-PSZ composites , 2008 .

[24]  Yifu Shen,et al.  Effects of dispersion technique and component ratio on densification and microstructure of multi-component Cu-based metal powder in direct laser sintering , 2007 .

[25]  X. Miao.  Observation of microcracks formed in HA-316L composites , 2003 .

[26]  J. Torralba,et al.  Reinforcing 316L stainless steel with intermetallic and carbide particles , 2002 .

[27]  K. Das,et al.  A Review on the various synthesis routes of TiC reinforced ferrous based composites , 2002 .

[28]  M. Chandrasekaran,et al.  Matrix reinforcement interaction in SiC/316L stainless steel composite , 2000 .

[29]  N. Antón,et al.  Mechanical and corrosion behaviour of powder metallurgy stainless steel based metal matrix composites , 1997 .

[30]  G. S. Hanumanth,et al.  Solidification of particle-reinforced metal-matrix composites , 1996 .

[31]  M. Aegerter,et al.  Mechanical properties of zirconia-coated 316L austenitic stainless steel , 1996 .

[32]  R. Guthrie,et al.  The physical properties of liquid metals , 1988 .