Crashworthiness optimization of front rail structure using macro element method and evolutionary algorithm

In this paper, the research on crashworthiness optimization of thin-walled structures is presented. The model of “S”-shaped frame subjected to complex crush load is analyzed. The objective of the study is to determine the optimal dimensions of the space frame cross section so as to achieve the maximal energy absorption of the structure and to fulfill the design requirements related to the crushing force value and the geometry relationship. The Visual Crash Studio (VCS) software, based on the macro element methodology, is used to simulate the response of a thin-walled beam during the impact and to determine crashworthy parameters. The results present a very good correlation with the finite element calculations but can be obtained in a much shorter time. The VCS software was coupled to evolutionary algorithm developed to determine the best solution. The optimization procedures revealed the necessity of a new design criterion related to maximal bending moments in the structure. This formulation enabled to obtain very good results after short processing on a PC computer. The proposed approach may be successfully used at early stages of the crashworthiness analysis.

[1]  Georgia Georgiou,et al.  On the assessment of the macro-element methodology for full vehicle crashworthiness analysis , 2018 .

[2]  A. E. Eiben,et al.  Introduction to Evolutionary Computing , 2003, Natural Computing Series.

[3]  Kenji Takada,et al.  Fast Crash Analysis of 3D Beam Structures Based on Object Oriented Formulation , 2004 .

[4]  Christophe Bastien,et al.  Nonlinear Optimization of Vehicle Safety Structures: Modeling of Structures Subjected to Large Deformations , 2015 .

[5]  Heung-Soo Kim,et al.  Numerical and analytical study on deep biaxial bending collapse of thin-walled beams , 2000 .

[6]  Jianguang Fang,et al.  On design optimization for structural crashworthiness and its state of the art , 2017 .

[7]  Christophe Bastien,et al.  Optimization for Refinement of Vehicle Safety Structures , 2016 .

[8]  Heung-Soo Kim,et al.  Crush behavior of thin-walled prismatic columns under combined bending and compression , 2001 .

[9]  Changsoo Kim,et al.  Design of Aluminum Space Frame for Crashworthiness Improvement , 1996 .

[10]  Ping Zhu,et al.  Lightweight Design of Automotive Front Side Rail Based on Robust Optimisation , 2007 .

[11]  Yunbo Liu,et al.  Development of simplified thin-walled beam models for crashworthiness analyses , 2007 .

[12]  Mariusz Pyrz,et al.  Crashworthiness optimization of thin-walled tubes using Macro Element Method and Evolutionary Algorithm , 2017 .

[13]  Guilin Wen,et al.  Optimisation design of reinforced S-shaped frame structure under axial dynamic loading , 2014 .

[14]  Zonghua Zhang,et al.  Design optimization of the S-frame to improve crashworthiness , 2014 .

[15]  Christophe Bastien,et al.  Effects of roof crush loading scenario upon body in white using topology optimisation , 2012 .

[16]  Heung-Soo Kim,et al.  Closed-form solution for crushing response of three-dimensional thin-walled “S” frames with rectangular cross-sections , 2004 .

[17]  W. Abramowicz,et al.  Dynamic axial crushing of square tubes , 1984 .

[18]  Heung-Soo Kim,et al.  Effect of the cross-sectional shape of hat-type cross-sections on crash resistance of an “S”-frame , 2001 .

[19]  Yucheng Liu,et al.  Simplified modelling of thin-walled box section beam , 2006 .

[20]  Yucheng Liu.  Crashworthiness design of thin-walled curved beams with box and channel cross sections , 2010 .

[21]  Fabian Duddeck,et al.  Topology optimization for crashworthiness of thin-walled structures under axial impact using hybrid cellular automata , 2016 .

[22]  C.-M. Ni.  Impact response of curved box beam-columns with large global and local deformations , 1973 .

[23]  Wlodek Abramowicz.  An alternative formulation of the FE method for arbitrary discrete/continuous models , 2004 .

[24]  J Latchford,et al.  Rollover far side roof strength test and simulation , 2007 .

[25]  Fengchong Lan,et al.  Crashworthiness research on S-shaped front rails made of steel–aluminum hybrid materials , 2011 .

[26]  P. Hosseini-Tehrani,et al.  Two materials S-frame representation for improving crashworthiness and lightening , 2006 .

[27]  Yucheng Liu.  Thin-walled curved hexagonal beams in crashes – FEA and design , 2010 .

[28]  Dengfeng Wang,et al.  Optimizing the design of automotive S-rail using grey relational analysis coupled with grey entropy measurement to improve crashworthiness , 2017 .

[29]  Bahram Notghi,et al.  Reliability-based robust multi-objective crashworthiness optimisation of S-shaped box beams with parametric uncertainties , 2010 .

[30]  Norman Jones,et al.  Dynamic progressive buckling of circular and square tubes , 1986 .

[31]  M Kroiss,et al.  Multi-Objective Optimization of a Vehicle Body by Combining Gradient-based Methods and Vehicle Concept Modelling , 2015 .

[32]  T. Wierzbicki,et al.  Torsional collapse of thin-walled prismatic columns , 2000 .

[33]  A. D. Seeds,et al.  Aluminium Crash Members in Axial and Bending Collapse , 1992 .