A Review on Electromechanical Devices Fabricated by Additive Manufacturing

[1]  M. Bendahan,et al.  Temperature sensor realized by inkjet printing process on flexible substrate , 2016 .

[2]  Takao Someya,et al.  Printed skin-like large-area flexible sensors and actuators , 2009 .

[3]  Chen Yang,et al.  3D-printed microelectronics for integrated circuitry and passive wireless sensors , 2015 .

[4]  Jean-Louis Marty,et al.  Disposable Screen Printed Electrochemical Sensors: Tools for Environmental Monitoring , 2014, Sensors.

[5]  Fei Liu,et al.  Study of the key technologies of LOM for functional metal parts , 2004 .

[6]  Edward D. Herderick,et al.  Progress in Additive Manufacturing , 2015 .

[7]  Silvana Quaglini,et al.  Estimation of human trunk movements by wearable strain sensors and improvement of sensor’s placement on intelligent biomedical clothes , 2012, Biomedical engineering online.

[8]  Je Hoon Oh,et al.  All-inkjet-printed electrical components and circuit fabrication on a plastic substrate , 2012 .

[9]  Jinsheng Xu,et al.  Fabrication and Evaluation of a Micro(Bio)Sensor Array Chip for Multiple Parallel Measurements of Important Cell Biomarkers , 2014, Sensors.

[10]  Ryan B. Wicker,et al.  3D printing of electro mechanical systems , 2013 .

[11]  Satoshi Kawata,et al.  Two-photon photopolymerization and 3D lithographic microfabrication , 2005 .

[12]  Seokheun Choi,et al.  Paper-based batteries: a review. , 2014, Biosensors & bioelectronics.

[13]  Eberhard Abele,et al.  Additive manufacturing of active struts for piezoelectric shunt damping , 2016 .

[14]  Chi Zhou,et al.  Digital material fabrication using mask‐image‐projection‐based stereolithography , 2013 .

[15]  Jack G. Zhou,et al.  Chemical liquid deposition process for microstructure fabrication , 2005 .

[16]  Ryan B. Wicker,et al.  Expanding the applicability of FDM-type technologies through materials development , 2015 .

[17]  Ivan Poupyrev,et al.  3D printed interactive speakers , 2014, CHI.

[18]  D. Espalin,et al.  Encapsulated Copper Wire and Copper Mesh Capacitive Sensing for 3-D Printing Applications , 2015, IEEE Sensors Journal.

[19]  Sanjay Sampath,et al.  Thermal Spray Techniques for Fabrication of Meso-Electronics and Sensors , 2000 .

[20]  Vivek Subramanian,et al.  Characterization and optimization of a printed, primary silver–zinc battery , 2012 .

[21]  Michael C. McAlpine,et al.  3D Printed Bionic Ears , 2013, Nano letters.

[22]  K. Edinger.  Focused Ion Beams for Direct Writing , 2002 .

[23]  Markus J Buehler,et al.  Three-Dimensional-Printing of Bio-Inspired Composites. , 2016, Journal of biomechanical engineering.

[24]  Chih-Ting Lin,et al.  A Low-Power Integrated Humidity CMOS Sensor by Printing-on-Chip Technology , 2014, Sensors.

[25]  Ian Gibson,et al.  Additive manufacturing technologies : 3D printing, rapid prototyping, and direct digital manufacturing , 2015 .

[26]  Daniel Filippini,et al.  Low cost lab-on-a-chip prototyping with a consumer grade 3D printer. , 2014, Lab on a chip.

[27]  Jon P. Longtin,et al.  Direct-Write Thermal Spraying of Multilayer Electronics and Sensor Structures , 2002 .

[28]  Hod Lipson,et al.  Freeform fabrication of ionomeric polymer‐metal composite actuators , 2006, Rapid Prototyping Journal.

[29]  Philip J. Kitson,et al.  Configurable 3D-Printed millifluidic and microfluidic 'lab on a chip' reactionware devices. , 2012, Lab on a chip.

[30]  David A. Hutchins,et al.  A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors , 2012, PloS one.

[31]  Daniel Citterio,et al.  Inkjet printed (bio)chemical sensing devices , 2013, Analytical and Bioanalytical Chemistry.

[32]  Christopher B. Williams,et al.  A procedure for creating actuated joints via embedding shape memory alloys in PolyJet 3D printing , 2015 .

[33]  Donald J. Hayes,et al.  Direct Write Using Ink-Jet Techniques , 2002 .

[34]  M. Itagaki,et al.  Screen-printed atmospheric corrosion monitoring sensor based on electrochemical impedance spectroscopy , 2009 .

[35]  R. Dickstein,et al.  Anticipatory postural adjustment in selected trunk muscles in post stroke hemiparetic patients. , 2004, Archives of physical medicine and rehabilitation.

[36]  M. Dapino.  Smart Structure Integration Through Ultrasonic Additive Manufacturing , 2014 .

[37]  I. Zein,et al.  Fused deposition modeling of novel scaffold architectures for tissue engineering applications. , 2002, Biomaterials.

[38]  Ben Wang,et al.  Fabrication and characterization of aerosol-jet printed strain sensors for multifunctional composite structures , 2012 .

[39]  Samuel Lakeou,et al.  Matrix Assisted Pulsed Laser Evaporation Direct Write (MAPLE DW): A New Method to Rapidly Prototype Active and Passive Electronic Circuit Elements , 2000 .

[40]  Candid Reig,et al.  Printed Antennas for Sensor Applications: A Review , 2014, IEEE Sensors Journal.

[41]  Khairurrijal,et al.  A New Approach for Fabricating Low Cost DSSC by Using Carbon-Ink From Inkjet Printer and Its Improvement Efficiency by Depositing Metal Bridge Between Titanium Dioxide Particles , 2014 .

[42]  Vishesh Vikas,et al.  Design Methodologies for Soft-Material Robots Through Additive Manufacturing, From Prototyping to Locomotion , 2015 .

[43]  T. Arie,et al.  Fully printed flexible fingerprint-like three-axis tactile and slip force and temperature sensors for artificial skin. , 2014, ACS nano.

[44]  Masahiro Anzai,et al.  Lamination of metal sheets , 1997 .

[45]  Sethu Vijayakumar,et al.  Rapid Manufacture of Novel Variable Impedance Robots , 2016 .

[46]  Gordon G. Wallace,et al.  Fabrication of an ammonia gas sensor using inkjet-printed polyaniline nanoparticles , 2008 .

[47]  K. Kim,et al.  A novel method of manufacturing three-dimensional ionic polymer–metal composites (IPMCs) biomimetic sensors, actuators and artificial muscles , 2002 .

[48]  Ashish D. Deshpande,et al.  On Integration of Additive Manufacturing During the Design and Development of a Rehabilitation Robot: A Case Study , 2015 .

[49]  Mohsen A. Jafari,et al.  A novel system for fused deposition of advanced multiple ceramics , 2000 .

[50]  Ingo Lütkebohle,et al.  An affordable, 3D-printable camera eye with two active degrees of freedom for an anthropomorphic robot , 2012, 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[51]  Sawyer B. Fuller,et al.  Ink-jet printed nanoparticle microelectromechanical systems , 2002 .

[52]  Alexandra M. Golobic,et al.  Highly compressible 3D periodic graphene aerogel microlattices , 2015, Nature Communications.

[53]  John E. Anthony,et al.  Hybrid Inorganic/organic complementary circuits using PEALD ZnO and ink-jet printed diF-TESADT TFTs , 2013 .

[54]  Y. Bonnassieux,et al.  Highly reproducible, hysteresis-free, flexible strain sensors by inkjet printing of carbon nanotubes , 2015 .

[55]  Alessandro Chiolerio,et al.  Wearable Electronics and Smart Textiles: A Critical Review , 2014, Sensors.

[56]  Andreas Tünnermann,et al.  All inkjet-printed piezoelectric polymer actuators: Characterization and applications for micropumps in lab-on-a-chip systems , 2013 .

[57]  Jack G. Zhou,et al.  Feasibility study of chemical liquid deposition based solid freeform fabrication , 2000 .

[58]  Selvakumar Palanisamy,et al.  Highly selective dopamine electrochemical sensor based on electrochemically pretreated graphite and nafion composite modified screen printed carbon electrode. , 2013, Journal of colloid and interface science.

[59]  Atif Shamim,et al.  An Inkjet-Printed Buoyant 3-D Lagrangian Sensor for Real-Time Flood Monitoring , 2014, IEEE Transactions on Antennas and Propagation.

[60]  Hod Lipson,et al.  Bitblox: Printable digital materials for electromechanical machines , 2014, Int. J. Robotics Res..

[61]  Lee E. Weiss,et al.  Inkjet printed chemical sensor array based on polythiophene conductive polymers , 2007 .

[62]  James D. Carrico,et al.  Fused Filament Additive Manufacturing of Ionic Polymer-Metal Composite Soft Active 3D Structures , 2015 .

[63]  Ryan B. Wicker,et al.  3D Printing for the Rapid Prototyping of Structural Electronics , 2014, IEEE Access.

[64]  Ryan B. Wicker,et al.  3D Printing multifunctionality: structures with electronics , 2014 .

[65]  Steve Simon,et al.  Options for additive rapid prototyping methods (3D printing) in MEMS technology , 2014 .

[66]  Daniel Filippini,et al.  PDMS lab-on-a-chip fabrication using 3D printed templates. , 2014, Lab on a chip.

[67]  A. Safari,et al.  Piezoelectric composites for sensor and actuator applications , 2005, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[68]  Ryan B. Wicker,et al.  Mesoscale RF relay enabled by integrated rapid manufacturing , 2006 .

[69]  Sung-Hoon Choa,et al.  Electromechanical properties of printed copper ink film using a white flash light annealing process for flexible electronics , 2015, Microelectron. Reliab..

[70]  J. Lewis,et al.  3D Printing of Interdigitated Li‐Ion Microbattery Architectures , 2013, Advanced materials.

[71]  Xi Zhang,et al.  Fully printed electronics on flexible substrates: High gain amplifiers and DAC , 2014 .

[72]  F. Piller,et al.  Economic implications of 3D printing: Market structure models in light of additive manufacturing revisited , 2015 .

[73]  Michael F. Zaeh,et al.  Powder-bed-based 3D-printing of function integrated parts , 2015 .

[74]  Hwan-Sik Yoon,et al.  Aerosol-Printed Strain Sensor Using PEDOT:PSS , 2013, IEEE Sensors Journal.

[75]  Takuya Umedachi,et al.  Highly deformable 3-D printed soft robot generating inching and crawling locomotions with variable friction legs , 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[76]  Fulvia Villani,et al.  Inkjet printed graphene-based chemi-resistors for gas detection in environmental conditions , 2015, 2015 XVIII AISEM Annual Conference.

[77]  Jihoon Kim,et al.  Inkjet printing of transparent InZnSnO conducting electrodes from nano-particle ink for printable organic photovoltaics , 2012 .

[78]  Hermann Seitz,et al.  A review on 3D micro-additive manufacturing technologies , 2012, The International Journal of Advanced Manufacturing Technology.

[79]  L. Froyen,et al.  Binding Mechanisms in Selective Laser Sintering and Selective Laser Melting , 2004 .

[80]  H. Helvajian.  3D Microengineering via Laser Direct-Write Processing Approaches , 2002 .

[81]  Leandro Lorenzelli,et al.  Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review , 2015, IEEE Sensors Journal.

[82]  Pietro Salvo,et al.  A 3D printed dry electrode for ECG/EEG recording , 2012 .

[83]  Xuejun Lu,et al.  Aerosol-jet-printed, high-speed, flexible thin-film transistor made using single-walled carbon nanotube solution , 2010 .

[84]  Mark A. Ganter,et al.  3D-printed mechanochromic materials. , 2015, ACS applied materials & interfaces.

[85]  Aaron M. Dollar,et al.  A modular, open-source 3D printed underactuated hand , 2013, 2013 IEEE International Conference on Robotics and Automation.

[86]  Jinkyu Yang,et al.  Flexible ceramic-elastomer composite piezoelectric energy harvester fabricated by additive manufacturing , 2016 .

[87]  Bradley R. Ringeisen,et al.  Matrix Assisted Pulsed Laser Evaporation-Direct Write (Maple-Dw): A New Method to Rapidly Prototype Organic and Inorganic Materials , 2002 .