Thermodynamic model to study a solar collector for its application to Stirling engines

Abstract Energy production through clean and green sources has been paid attention over the last decades owing to high energy consumption and environmental emission. Solar energy is one of the most useful energy sources. Due to high investment cost of centralized generation of electricity and considerable loss in the network, it is necessary to look forward to decentralized electricity generation technologies. Stirling engines have high efficiency and are able to be coupled with solar energy which cannot be applied in internal combustion engines. Solar Stirling engines can be commercialized and used to generate decentralized electricity in small to medium levels. One of the most important steps to set up an efficient solar Stirling engine is choosing and designing the collector. In this study, a solar parabolic collector with 3500 W of power for its application to Stirling engines was designed and analyzed (It is the thermal inlet power for a Stirling engine). We studied the parabolic collector based on optical and thermal analysis. In this case, solar energy is focused by a concentrating mirror and transferred to a pipe containing fluid. MATLAB software was used for obtaining the parameters of the collector, with respect to the geographic, temporal, and environmental conditions, fluid inlet temperature and some other considerations. After obtaining the results of the design, we studied the effects of changing some conditions and parameters such as annular space pressure, type of the gas, wind velocity, environment temperature and absorber pipe coating.

[1]  F. Kuznik,et al.  Experimental assessment of a phase change material for wall building use , 2009 .

[2]  Juan Xiao,et al.  Three-dimensional numerical study of heat transfer characteristics in the receiver tube of parabolic trough solar collector , 2010 .

[3]  S. P Sukhatme,et al.  Solar Energy: Principles of Thermal Collection and Storage , 2009 .

[4]  M. Yaghoubi,et al.  Analysis of wind flow around a parabolic collector (1) fluid flow , 2007 .

[5]  T. Stuetzle,et al.  Automatic control of a 30 MWe SEGS VI parabolic trough plant , 2004 .

[6]  Soteris A. Kalogirou,et al.  Solar thermal collectors and applications , 2004 .

[7]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[8]  Ruzhu Wang,et al.  Numerical and experimental analysis of a point focus solar collector using high concentration imaging PMMA Fresnel lens , 2011 .

[9]  S. Kalogirou.  A detailed thermal model of a parabolic trough collector receiver , 2012 .

[10]  Soteris A. Kalogirou,et al.  The potential of solar industrial process heat applications , 2003 .

[11]  G. Kumaresan,et al.  Performance studies of a solar parabolic trough collector with a thermal energy storage system , 2012 .

[12]  Emmanuel E. Anyanwu,et al.  Review of solid adsorption solar refrigeration II:: An overview of the principles and theory , 2004 .

[13]  Michael W. Edenburn.  Performance analysis of a cylindrical parabolic focusing collector and comparison with experimental results , 1976 .

[14]  O. García-Valladares,et al.  Numerical simulation of parabolic trough solar collector: Improvement using counter flow concentric circular heat exchangers , 2009 .

[15]  Pichai Namprakai,et al.  A new version of a solar water heating system coupled with a solar water pump , 2009 .

[16]  Francesco Calise,et al.  Thermoeconomic optimization of Solar Heating and Cooling systems , 2011 .

[17]  Jun Wang,et al.  An optimized model and test of the China’s first high temperature parabolic trough solar receiver , 2010 .

[18]  Eckhard Lüpfert,et al.  Advances in Parabolic Trough Solar Power Technology , 2002 .

[19]  W. Beckman,et al.  Solar Engineering of Thermal Processes , 1985 .

[20]  R. B. Pope,et al.  Analysis of linear focused collectors for solar power , 1972 .

[21]  A. Patnode.  Simulation and Performance Evaluation of Parabolic Trough Solar Power Plants , 2006 .

[22]  R. Forristall,et al.  Heat Transfer Analysis and Modeling of a Parabolic Trough Solar Receiver Implemented in Engineering Equation Solver , 2003 .

[23]  Moh’d A. Al-Nimr,et al.  A modified tubeless solar collector partially filled with porous substrate , 1998 .

[24]  Ya-Ling He,et al.  A MCRT and FVM coupled simulation method for energy conversion process in parabolic trough solar collector , 2011 .

[25]  A. C. Ratzel,et al.  Techniques for reducing thermal conduction and natural convection heat losses in annular receiver geometries , 1979 .

[26]  Somchai Wongwises,et al.  Optimum absorber temperature of a once-reflecting full conical concentrator of a low temperature differential Stirling engine , 2005 .

[27]  M. Abouzeid,et al.  Use of a reluctance stepper motor for solar tracking based on a programmable logic array (PLA) controller , 2001 .

[28]  M. M. Rahman,et al.  Heat transfer analysis of parabolic trough solar receiver , 2011 .

[29]  P. Cooper.  The absorption of radiation in solar stills , 1969 .

[30]  Ming Li,et al.  Investigation of evacuated tube heated by solar trough concentrating system , 2006 .

[31]  Alper Ergün,et al.  Thermodynamic analysis of a new design of temperature controlled parabolic trough collector , 2013 .

[32]  Ruzhu Wang,et al.  Experimental investigation and analysis on a concentrating solar collector using linear Fresnel lens , 2010 .

[33]  S. Kalogirou.  Solar Energy Engineering: Processes and Systems , 2009 .

[34]  Peiwen Li,et al.  A novel application of a Fresnel lens for a solar stove and solar heating , 2011 .

[35]  John Currie,et al.  Integrated collector storage solar water heater: Temperature stratification , 2009 .

[36]  Mahmood Yaghoubi,et al.  Analysis of wind flow around a parabolic collector (2) heat transfer from receiver tube , 2007 .

[37]  A. Thomas,et al.  Design data for the computation of thermal loss in the receiver of a parabolic trough concentrator , 1994 .

[38]  John A. Clark,et al.  An analysis of the technical and economic performance of a parabolic trough concentrator for solar industrial process heat application , 1982 .