Effect of Random Void Defects on the Mechanical Behavior of C/C Braided Composites

Carbon/carbon (C/C) composites are widely used in engineering due to their superior mechanical performance. However, manufacturing defects, such as voids and micro‐cracks, seriously affect the C/C material and may initiate microstructural damage. In this paper, finite element models with random void defects are constructed to analyze the progressive damage behavior of C/C braided composites subjected to uniaxial tension. Because Hashin's criteria may not accurately predict the onset of failure for the braided composites, an improved damage initiation criterion based on Hashin's theory is proposed. A new damage evolvement model that is controlled by the material fracture energy of the textile composites and equivalence displacements is proposed. A Monte Carlo algorithm program is written to randomly assign individual elements as “void defects” in the carbon fiber yarns, carbon matrix, and fiber yarn‐matrix interface. Based on numerical analysis, the influence of the volume fraction of voids in three zones on the mechanical properties of the C/C composites is investigated. The numerical simulation results show that although the braided fiber yarns reduce the effect of random void defects on the elastic modulus and tensile strength, the influence of matrix defects cannot be avoided.

[1]  A. Waas,et al.  The effects of defects on the compressive response of thick carbon composites: An experimental and computational study , 2017 .

[2]  Jun Liang,et al.  An anisotropic elastoplastic damage constitutive model for 3D needled C/C-SiC composites , 2017 .

[3]  G. Vignoles,et al.  Synthesis of carbon coating and carbon matrix for C/C composites based on a hydrocarbon in its supercritical state , 2017 .

[4]  Chengguo Wang,et al.  Synthesis and characterization of nano-scale and submicro-scale silicon carbide whiskers on C/C composites , 2017 .

[5]  Lai-fei Cheng,et al.  The effect of hole defects on the oxidation behaviour of two-dimensional C/SiC composites , 2016 .

[6]  P. R. Cunningham,et al.  Multi-scale damage modelling of 3D woven composites under uni-axial tension , 2016 .

[7]  Jun Liang,et al.  Modeling of Nonlinear Mechanical Behavior for 3D Needled C/C-SiC Composites Under Tensile Load , 2016, Applied Composite Materials.

[8]  Rani Elhajjar,et al.  A hybrid numerical and imaging approach for characterizing defects in composite structures , 2016 .

[9]  Hejun Li,et al.  Effects of high-temperature annealing on the microstructures and mechanical properties of C/C–ZrC–SiC composites prepared by precursor infiltration and pyrolysis , 2016 .

[10]  Ai Shigang,et al.  A Numerical Study on the Thermal Conductivity of 3D Woven C/C Composites at High Temperature , 2015, Applied Composite Materials.

[11]  Fang Daining,et al.  Effect of manufacturing defects on mechanical properties and failure features of 3D orthogonal woven C/C composites , 2015 .

[12]  Na Chen,et al.  Experimental and Theoretical Advances in Amorphous Alloys , 2014 .

[13]  Erik L. G. Wernersson,et al.  Effects of defects on the tensile strength of short-fibre composite materials , 2014 .

[14]  Aditi Chattopadhyay,et al.  Damage characterization of surface and sub-surface defects in stitch-bonded biaxial carbon/epoxy composites , 2014 .

[15]  F. Daining,et al.  Finite Element Modeling of 3D Orthogonal Woven C/C Composite Based on Micro-Computed Tomography Experiment , 2014, Applied Composite Materials.

[16]  T. Zeng,et al.  Finite Element Analysis of Thermo-Mechanical Properties of 3D Braided Composites , 2014, Applied Composite Materials.

[17]  Yuxi Jia,et al.  Effective elastic properties and stress distribution of 2D biaxial nonorthogonally braided composites , 2012 .

[18]  Jun Liang,et al.  Effect of Interface Properties on Mechanical Behavior of 3D Four-Directional Braided Composites with Large Braid Angle Subjected to Uniaxial Tension , 2011 .

[19]  Liang Jun,et al.  Progressive damage and nonlinear analysis of 3D four-directional braided composites under unidirectional tension , 2009 .

[20]  Adrian P. Mouritz,et al.  Tensile fatigue properties of a 3D orthogonal woven composite , 2008 .

[21]  Ireneusz Lapczyk,et al.  Progressive damage modeling in fiber-reinforced materials , 2007 .

[22]  F. Christin.  Design, Fabrication, and Application of Thermostructural Composites (TSC) like C/C, C/SiC, and SiC/SiC Composites , 2002 .

[23]  Joon-Hyung Byun,et al.  The analytical characterization of 2-D braided textile composites , 2000 .