EUV resist performance enhancement by UV flood exposure for high NA EUV lithography

The enhancement in chemical gradients between the EUV exposed and unexposed areas can generate a wider process window, possibly, a smaller stochastic defectivity, and a lower local CD uniformity in EUV resists. This enhancement, in turn, helps to overcome the challenge of the small process window in high NA EUV lithography. In this work, a new concept resist, which is developed based on our chemical gradient enhancement technique model, is used to drive the chemical gradient upward chemically. The resist also has the capability of absorbing UV selectively at EUV exposed areas. Therefore, the UV flood exposure system, which has been discussed in Photosensitized Chemically Amplified ResistTM (PSCARTM), is used as another key part to further enhance the new resist. The new concept resist with UV lights was confirmed to give 15.1% improvement in its EUV sensitivity and, simultaneously, 25.0% improvement in local CD uniformity. This technique might be one of the solutions to bring CAR resist further into high-NA EUV lithography.

[1]  Seiichi Tagawa,et al.  High-resist sensitization by pattern and flood combination lithography , 2014, Advanced Lithography.

[2]  G. Vandenberghe,et al.  Constructing a robust PSCAR process for EUV , 2018, Advanced Lithography.

[3]  Gijsbert Rispens,et al.  Challenge toward breakage of RLS trade-off for EUV lithography by Photosensitized Chemically Amplified Resist (PSCAR) with flood exposure , 2016, SPIE Advanced Lithography.

[4]  Geert Vandenberghe,et al.  EUV resist sensitization and roughness improvement by PSCAR with in-line UV flood exposure system , 2018, Advanced Lithography.

[5]  Geert Vandenberghe,et al.  Calibrated PSCAR stochastic simulation , 2019, Advanced Lithography.

[6]  Gijsbert Rispens,et al.  Sensitivity enhancement of chemically amplified resists and performance study using extreme ultraviolet interference lithography , 2016 .

[7]  Hans-Jürgen Stock,et al.  EUV resist chemical gradient enhancement by UV flood exposure for improvement in EUV resist resolution, process control, roughness, sensitivity, and stochastic defectivity , 2020, Advanced Lithography.

[8]  Gijsbert Rispens,et al.  Novel high sensitivity EUV photoresist for sub-7nm node , 2016, SPIE Advanced Lithography.

[9]  Gijsbert Rispens,et al.  Sensitivity enhancement of chemically amplified resists and performance study using EUV interference lithography , 2016, SPIE Advanced Lithography.

[10]  Akihiro Oshima,et al.  Simulation and experimentation of PSCAR chemistry for complex structures , 2017, Advanced Lithography.

[11]  S. Tagawa,et al.  Super High Sensitivity Enhancement by Photo-Sensitized Chemically Amplified Resist (PS-CAR) Process , 2013 .

[12]  Geert Vandenberghe,et al.  Photosensitized Chemically Amplified Resist (PSCAR) 2.0 for high-throughput and high-resolution EUV lithography: dual photosensitization of acid generation and quencher decomposition by flood exposure , 2017, Advanced Lithography.

[13]  Geert Vandenberghe,et al.  PSCAR optimization to reduce EUV resist roughness with sensitization using Resist Formulation Optimizer (RFO) , 2019, Advanced Lithography.