A maximum-likelihood output-error parameter estimation technique has been used to obtain stability and control derivatives for the NASA F-18B Systems Research Aircraft. This work has been performed to support flight testing of the active aeroelastic wing (AAW) F-18A project. The goal of this research is to obtain baseline F-18 stability and control derivatives that will form the foundation of the aerodynamic model for the AAW aircraft configuration. Flight data have been obtained at Mach numbers between 0.85 and 1.30 and at dynamic pressures ranging between 600 and 1500 lbf/sq ft. At each test condition, longitudinal and lateral-directional doublets have been performed using an automated onboard excitation system. The doublet maneuver consists of a series of single-surface inputs so that individual control-surface motions cannot be correlated with other control-surface motions. Flight test results have shown that several stability and control derivatives are significantly different than prescribed by the F-18B aerodynamic model. This report defines the parameter estimation technique used, presents stability and control derivative results, compares the results with predictions based on the current F-18B aerodynamic model, and shows improvements to the nonlinear simulation using updated derivatives from this research.
[1]
J. Carter.
Production support flight control computers: research capability for F/A-18 aircraft at Dryden Flight Research Center
,
1997,
16th DASC. AIAA/IEEE Digital Avionics Systems Conference. Reflections to the Future. Proceedings.
[2]
Stephen A. Whitmore,et al.
In-flight demonstration of a Real-Time Flush Airdata Sensing (RT-FADS) system
,
1995
.
[3]
R. E. Maine,et al.
Application of parameter estimation to aircraft stability and control: The output-error approach
,
1986
.
[4]
Kenneth,et al.
PRACTICAL ASPECTS OF USING A MAXIMUM LIKELIHOOD ESTIMATION METHOD TO EXTRACT STABILITY A N D CONTROL DERIVATIVES FROM FLIGHT DATA
,
2002
.
[5]
R. E. Maine,et al.
Practical aspects of a maximum likelihood estimation method to extract stability and control derivatives from flight data
,
1976
.
[6]
T. G. Gainer,et al.
Summary of transformation equations and equations of motion used in free flight and wind tunnel data reduction and analysis
,
1972
.