论文信息 - Thermomigration in SnPb composite flip chip solder joints

Thermomigration in SnPb composite flip chip solder joints

We have used composite flip chip solder joints to study thermomigration. The composite solder joint has 97Pb3Sn on the Si side and eutectic 37Pb63Sn on the substrate side. Redistribution of Sn and Pb occurs in thermomigration, and we found that Sn has moved to the Si side (the hot end) and Pb to the substrate side (the cold end). We estimate the driving force that a temperature gradient of 1000°C∕cm or a temperature difference of 10°C across a solder joint of 100μm in diameter is sufficient to induce the thermomigration.

[1] Hua Ye,et al. Thermomigration in Pb–Sn solder joints under joule heating during electric current stressing , 2003 .

[2] P. Shewmon. The thermal diffusion of carbon in α and γ iron , 1960 .

[3] Paul Shewmon,et al. Diffusion in Solids , 2016 .

[4] D. R. Frear,et al. Electromigration of eutectic SnPb and SnAg3.8Cu0.7 flip chip solder bumps and under-bump metallization , 2001 .

[5] Hua Ye,et al. Failure Modes of Flip Chip Solder Joints Under High Electric Current Density , 2005 .

[6] D. V. Ragone,et al. Thermodynamics of materials , 1995 .

[7] K. Tu,et al. Interdiffusion in a bulk couple of lead and lead-50 wt% indium alloy , 1976 .