Suppressing defects through the synergistic effect of a Lewis base and a Lewis acid for highly efficient and stable perovskite solar cells

Achieving long-term operational stability at a high efficiency level for perovskite solar cells is the most challenging issue toward commercialization of this emerging photovoltaic technology. Here, we investigated the cooperation of a Lewis base and a Lewis acid by combining commercial bis-PCBM mixed isomers as the Lewis acid in the antisolvent and N-(4-bromophenyl)thiourea (BrPh-ThR) as the Lewis base in the perovskite solution precursor. The combination of the Lewis base and the Lewis acid synergistically passivates Pb2+ and PbX3− antisite defects, enlarges the perovskite grain size, and improves charge-carrier separation and transport, leading to improved device efficiency from 19.3% to 21.7%. In addition, this Lewis base and acid combination also suppresses moisture incursion and passivates pinholes generated in the hole-transporting layer. The unsealed devices remained at 93% of the initial efficiency value in ambient air (10–20% relative humidity) after 3600 h at 20–25 °C and dropped by 10% after 1500 h under continuous operation at 1-sun illumination and 55 °C in nitrogen with maximum power-point tracking.

[1]  Dongmei Li,et al.  A perylene diimide based polymer: a dual function interfacial material for efficient perovskite solar cells , 2017 .

[2]  Q. Meng,et al.  Fluorinated fused nonacyclic interfacial materials for efficient and stable perovskite solar cells , 2017 .

[3]  H. Fan,et al.  Recent Advances in Improving the Stability of Perovskite Solar Cells , 2016 .

[4]  Henry J. Snaith,et al.  Efficient planar heterojunction perovskite solar cells by vapour deposition , 2013, Nature.

[5]  Liuyang Sun,et al.  Impact of grain boundaries on efficiency and stability of organic-inorganic trihalide perovskites , 2017, Nature Communications.

[6]  P. Fang,et al.  Passivated Perovskite Crystallization via g‐C3N4 for High‐Performance Solar Cells , 2018 .

[7]  Nakita K. Noel,et al.  Enhanced photoluminescence and solar cell performance via Lewis base passivation of organic-inorganic lead halide perovskites. , 2014, ACS nano.

[8]  Oleksandr Voznyy,et al.  Perovskite–fullerene hybrid materials suppress hysteresis in planar diodes , 2015, Nature Communications.

[9]  Mohammad Khaja Nazeeruddin,et al.  Improved performance and stability of perovskite solar cells by crystal crosslinking with alkylphosphonic acid ω-ammonium chlorides. , 2015, Nature chemistry.

[10]  Qi Chen,et al.  Chemical Reduction of Intrinsic Defects in Thicker Heterojunction Planar Perovskite Solar Cells , 2017, Advanced materials.

[11]  S. Zakeeruddin,et al.  Adamantanes Enhance the Photovoltaic Performance and Operational Stability of Perovskite Solar Cells by Effective Mitigation of Interfacial Defect States , 2018 .

[12]  Seonhee Lee,et al.  Self-formed grain boundary healing layer for highly efficient CH3NH3PbI3 perovskite solar cells , 2016, Nature Energy.

[13]  Konrad Wojciechowski,et al.  Supramolecular halogen bond passivation of organic-inorganic halide perovskite solar cells. , 2014, Nano letters.

[14]  Bo Chen,et al.  Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations , 2017, Nature Energy.

[15]  Philip Schulz,et al.  Tailored interfaces of unencapsulated perovskite solar cells for >1,000 hour operational stability , 2018 .

[16]  Yanhong Luo,et al.  Investigation on the role of Lewis bases in the ripening process of perovskite films for highly efficient perovskite solar cells , 2017 .

[17]  Yang Yang,et al.  A Bifunctional Lewis Base Additive for Microscopic Homogeneity in Perovskite Solar Cells , 2017 .

[18]  Sang Il Seok,et al.  High-performance photovoltaic perovskite layers fabricated through intramolecular exchange , 2015, Science.

[19]  Chao Li,et al.  A PCBM-assisted perovskite growth process to fabricate high efficiency semitransparent solar cells , 2016 .

[20]  Nam-Gyu Park,et al.  Lewis Acid-Base Adduct Approach for High Efficiency Perovskite Solar Cells. , 2016, Accounts of chemical research.

[21]  Yongbo Yuan,et al.  Ion Migration in Organometal Trihalide Perovskite and Its Impact on Photovoltaic Efficiency and Stability. , 2016, Accounts of chemical research.

[22]  Hongwei Zhu,et al.  Suppressing defects through thiadiazole derivatives that modulate CH3NH3PbI3 crystal growth for highly stable perovskite solar cells under dark conditions , 2018 .

[23]  Meng-Che Tsai,et al.  Organometal halide perovskite solar cells: degradation and stability , 2016 .

[24]  Qi Chen,et al.  Planar heterojunction perovskite solar cells via vapor-assisted solution process. , 2014, Journal of the American Chemical Society.

[25]  Min Gyu Kim,et al.  Colloidally prepared La-doped BaSnO3 electrodes for efficient, photostable perovskite solar cells , 2017, Science.

[26]  M. Li,et al.  Induced Crystallization of Perovskites by a Perylene Underlayer for High-Performance Solar Cells. , 2016, ACS nano.

[27]  Jie Zheng,et al.  Bulk heterojunction perovskite hybrid solar cells with large fill factor , 2015 .

[28]  Huanping Zhou,et al.  High‐Mobility p‐Type Organic Semiconducting Interlayer Enhancing Efficiency and Stability of Perovskite Solar Cells , 2017, Advanced science.

[29]  S. Zakeeruddin,et al.  A vacuum flash–assisted solution process for high-efficiency large-area perovskite solar cells , 2016, Science.

[30]  Kwanghee Lee,et al.  Achieving long-term stable perovskite solar cells via ion neutralization , 2016 .

[31]  Kai Zhu,et al.  Influence of Electrode Interfaces on the Stability of Perovskite Solar Cells: Reduced Degradation Using MoOx/Al for Hole Collection , 2016 .

[32]  Aram Amassian,et al.  Stable high efficiency two-dimensional perovskite solar cells via cesium doping , 2017 .

[33]  Jinsong Huang,et al.  π‐Conjugated Lewis Base: Efficient Trap‐Passivation and Charge‐Extraction for Hybrid Perovskite Solar Cells , 2017, Advanced materials.

[34]  Qingfeng Dong,et al.  Giant switchable photovoltaic effect in organometal trihalide perovskite devices. , 2015, Nature materials.

[35]  T. Murakami,et al.  Hysteresis-free perovskite solar cells made of potassium-doped organometal halide perovskite , 2017, Scientific Reports.

[36]  Qingfeng Dong,et al.  Electron-hole diffusion lengths > 175 μm in solution-grown CH3NH3PbI3 single crystals , 2015, Science.

[37]  G. Fang,et al.  A Lewis Base-Assisted Passivation Strategy Towards Highly Efficient and Stable Perovskite Solar Cells , 2018 .

[38]  S. Zakeeruddin,et al.  A Novel Dopant‐Free Triphenylamine Based Molecular “Butterfly” Hole‐Transport Material for Highly Efficient and Stable Perovskite Solar Cells , 2016 .

[39]  R. Munir,et al.  Stable High‐Performance Perovskite Solar Cells via Grain Boundary Passivation , 2018, Advanced materials.

[40]  S. Zakeeruddin,et al.  Isomer‐Pure Bis‐PCBM‐Assisted Crystal Engineering of Perovskite Solar Cells Showing Excellent Efficiency and Stability , 2017, Advanced materials.

[41]  Jianbin Xu,et al.  Fused‐Ring Electron Acceptor ITIC‐Th: A Novel Stabilizer for Halide Perovskite Precursor Solution , 2018 .

[42]  Chien-Hung Chiang,et al.  Bulk heterojunction perovskite–PCBM solar cells with high fill factor , 2016, Nature Photonics.

[43]  G. Cao,et al.  Highly Efficient and Stable Perovskite Solar Cells Based on Monolithically Grained CH3NH3PbI3 Film , 2017 .

[44]  Hongwei Song,et al.  Enhanced Performance of Perovskite Solar Cells with Zinc Chloride Additives. , 2017, ACS applied materials & interfaces.

[45]  Yin Xiao,et al.  Tuning the crystal growth of perovskite thin-films by adding the 2-pyridylthiourea additive for highly efficient and stable solar cells prepared in ambient air , 2017 .

[46]  Anders Hagfeldt,et al.  Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21% , 2016, Nature Energy.

[47]  Michael Grätzel,et al.  Systematic investigation of the impact of operation conditions on the degradation behaviour of perovskite solar cells , 2018, Nature Energy.

[48]  Nripan Mathews,et al.  Low-temperature solution-processed wavelength-tunable perovskites for lasing. , 2014, Nature materials.

[49]  Anders Hagfeldt,et al.  Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance , 2016, Science.

[50]  Wei Chen,et al.  Perovskite solar cells with 18.21% efficiency and area over 1 cm2 fabricated by heterojunction engineering , 2016, Nature Energy.

[51]  Peng Gao,et al.  Efficient luminescent solar cells based on tailored mixed-cation perovskites , 2016, Science Advances.