Finite Element Investigation of Quasi-Static Crack Growth in Functionally Graded Materials Using a Novel Cohesive Zone Fracture Model

This work studies mode I crack growth in ceramic/metal functionally graded materials (FGMs) using three-dimensional interface-cohesive elements based upon a new phenomenological cohesive fracture model. The local separation energies and peak tractions for the metal and ceramic constituents govern the cohesive fracture process. The model formulation introduces two cohesive gradation parameters to control the transition of fracture behavior between the constituents. Numerical values of volume fractions for the constituents specified at nodes of the finite element model set the spatial gradation of material properties with standard isoparametric interpolations inside interface elements and background solid elements to define pointwise material property values. The paper describes applications of the cohesive fracture model and computational scheme to analyze crack growth in compact tension, C(T), and single-edge notch bend, SE(B), specimens with material properties characteristic of a TiB/Ti FGM. Young's modulus and Poisson's ratio of the background solid material are determined using a self-consistent method (the background material remains linear elastic). The numerical studies demonstrate that the load to cause crack extension in the FGM compares to that for the metal and that crack growth response varies strongly with values of the cohesive gradation parameter for the metal. These results suggest the potential to calibrate the value of this parameter by matching the predicted and measured crack growth response in standard fracture mechanics specimens. ©2002 ASME

[1]  M. Ortiz,et al.  Computational modelling of impact damage in brittle materials , 1996 .

[2]  Glaucio H. Paulino,et al.  Fracture Testing and Analysis of a Layered Functionally Graded Ti/TiB Beam in 3-Point Bending , 1999 .

[3]  D. S. Dugdale.  Yielding of steel sheets containing slits , 1960 .

[4]  Joshua R. Smith,et al.  Universal binding energy curves for metals and bimetallic interfaces , 1981 .

[5]  Gang Bao,et al.  Crack bridging in functionally graded coatings , 1998 .

[6]  Yoshinari Miyamoto,et al.  Functionally Graded Materials. , 1995 .

[7]  Thomas Siegmund,et al.  A numerical study of dynamic crack growth in elastic-viscoplastic solids , 1997 .

[8]  R. H. Dodds,et al.  Simulation of ductile crack growth in thin aluminum panels using 3-D surface cohesive elements , 2001 .

[9]  M. Ortiz,et al.  FINITE-DEFORMATION IRREVERSIBLE COHESIVE ELEMENTS FOR THREE-DIMENSIONAL CRACK-PROPAGATION ANALYSIS , 1999 .

[10]  M. Koizumi.  THE CONCEPT OF FGM , 1993 .

[11]  R. Hill.  A self-consistent mechanics of composite materials , 1965 .

[12]  A. Needleman.  A Continuum Model for Void Nucleation by Inclusion Debonding , 1987 .

[13]  Richard L. Williamson,et al.  Finite element analysis of thermal residual stresses at graded ceramic‐metal interfaces. Part I. Model description and geometrical effects , 1993 .

[14]  A. Hillerborg,et al.  Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements , 1976 .

[15]  M. Elices,et al.  On the initial shape of the softening function of cohesive materials , 1997, International Journal of Fracture.

[16]  R. Cook,et al.  Concepts and Applications of Finite Element Analysis , 1974 .

[17]  Zhongmin Jin,et al.  Some basic fracture mechanics concepts in functionally graded materials , 1996 .

[18]  Subra Suresh,et al.  Elastoplastic analysis of thermal cycling: layered materials with compositional gradients , 1995 .

[19]  Viggo Tvergaard,et al.  MICROMECHANICAL MODELS FOR GRADED COMPOSITE MATERIALS , 1997 .

[20]  Glaucio H. Paulino,et al.  Evolutionary characteristic length method for smeared cracking finite element models , 1997 .

[21]  B. H. Rabin,et al.  Functionally Gradient Materials , 1995 .

[22]  J. Hutchinson,et al.  The relation between crack growth resistance and fracture process parameters in elastic-plastic solids , 1992 .

[23]  G. Paulino,et al.  Finite element evaluation of mixed mode stress intensity factors in functionally graded materials , 2002 .

[24]  Subra Suresh,et al.  Micromechanical modeling of reinforcement fracture in particle-reinforced metal-matrix composites , 1994 .