A numerical study of the Urban Heat Island over Madrid during the DESIREX (2008) campaign with WRF and an evaluation of simple mitigation strategies

Nowadays, mesoscale meteorological models coupled to Urban Canopy Parameterizations (UCP) can be used to complement and interpret the information gathered from intensive meteorological campaigns on the behaviour of the Urban Boundary Layer (UBL). Moreover, the impact of the air conditioning (AC) systems on the air temperature, the relationships existing between energy consumption (EC) and meteorological conditions, and the evaluation of strategies to mitigate the Urban Heat Island (UHI) phenomenon can be evaluated using detailed UCP. In this work, a new UCP implemented in the Weather Research and Forecasting (WRF) model (version V3.2) has been tested over the city of Madrid using two different turbulent parameterisations of the Planetary Boundary Layer (PBL) under atmospheric conditions that were favourable for a large UHI. Two selected days were analysed coinciding with the Dual-use European Security IR Experiment (DESIREX) campaign that took place in the summer of 2008, and focused on Urban Heat Island (UHI) and Urban Thermography (UT) monitoring and assessment. For the two simulated days (30 June and 1 July) a high UHI intensity (5-6 °C) was observed and modelled. Numerical results for the surface air temperature and wind speed were compared against measurements showing a global satisfactory performance of the model. Some differences in the air temperature predictions were observed within the two turbulent schemes. Subsequently, the impact of the AC systems and the EC were evaluated for the simulated period. The heat fluxes coming from AC systems were responsible of an increase in the air temperature up to 1.5–2 °C in some dense urban areas. Effects of modifications in the roof albedo and building material properties reduced the total EC by 4.8 and 3.6%, respectively, affecting the intensity of the UHI. When AC systems were not ejecting the heat fluxes out in the atmosphere, the EC was reduced to 2.5%. Copyright © 2011 Royal Meteorological Society

[1]  P. Lacarrére,et al.  Parameterization of Orography-Induced Turbulence in a Mesobeta--Scale Model , 1989 .

[2]  S. Belair,et al.  The New Canadian Urban Modelling System: Evaluation for Two Cases from the Joint Urban 2003 Oklahoma City Experiment , 2009 .

[3]  J. Fung,et al.  Urban Modification in a Mesoscale Model and the Effects on the Local Circulation in the Pearl River Delta Region , 2007 .

[4]  J. Dudhia,et al.  A Revised Approach to Ice Microphysical Processes for the Bulk Parameterization of Clouds and Precipitation , 2004 .

[5]  H. Landsberg Urban Climate , 2011, Urban Ecology for Citizens and Planners.

[6]  Valéry Masson,et al.  A Physically-Based Scheme For The Urban Energy Budget In Atmospheric Models , 2000 .

[7]  Sara Hodges,et al.  Mitigating New York City's Heat Island: Integrating Stakeholder Perspectives and Scientific Evaluation , 2009 .

[8]  Alberto Martilli,et al.  A new Building Energy Model coupled with an Urban Canopy Parameterization for urban climate simulations—part II. Validation with one dimension off-line simulations , 2009 .

[9]  E. Terradellas,et al.  Implementation of a Single-Column Model for Fog and Low Cloud Forecasting at Central-Spanish Airports , 2007 .

[10]  Fuqing Zhang,et al.  Evaluation of Three Planetary Boundary Layer Schemes in the WRF Model , 2010 .

[11]  A. Clappier,et al.  An Urban Surface Exchange Parameterisation for Mesoscale Models , 2002 .

[12]  H. Kondo,et al.  Development of a numerical simulation system toward comprehensive assessments of urban warming countermeasures including their impacts upon the urban buildings' energy-demands , 2003 .

[13]  J. Dudhia Numerical Study of Convection Observed during the Winter Monsoon Experiment Using a Mesoscale Two-Dimensional Model , 1989 .

[14]  A. Arnfield Two decades of urban climate research: a review of turbulence, exchanges of energy and water, and the urban heat island , 2003 .

[15]  J. Dudhia,et al.  Simulating the IHOP_2002 fair-weather CBL with the WRF-ARW-Noah modeling system. Part II: Structures from a few kilometers to 100 km across , 2010 .

[16]  Alain Clappier,et al.  A new building energy model coupled with an urban canopy parameterization for urban climate simulations—part I. formulation, verification, and sensitivity analysis of the model , 2009 .

[17]  C. Kennedy,et al.  Comparative life cycle assessment of standard and green roofs. , 2006, Environmental science & technology.

[18]  H. Kondo,et al.  A Simple Single-Layer Urban Canopy Model For Atmospheric Models: Comparison With Multi-Layer And Slab Models , 2001 .

[19]  Aya Hagishima,et al.  A Simple Energy Balance Model for Regular Building Arrays , 2005 .

[20]  Z. Janjic The Step-Mountain Eta Coordinate Model: Further Developments of the Convection, Viscous Sublayer, and Turbulence Closure Schemes , 1994 .

[21]  Carlos Yagüe,et al.  Statistical analysis of the Madrid urban heat island , 1991 .

[22]  D. Sailor A review of methods for estimating anthropogenic heat and moisture emissions in the urban environment , 2011 .

[23]  G. Powers,et al.  A Description of the Advanced Research WRF Version 3 , 2008 .

[24]  J. Dudhia,et al.  Coupling an Advanced Land Surface–Hydrology Model with the Penn State–NCAR MM5 Modeling System. Part I: Model Implementation and Sensitivity , 2001 .

[25]  Fei Chen,et al.  A Study of the Urban Boundary Layer Using Different Urban Parameterizations and High-Resolution Urban Canopy Parameters with WRF , 2011 .

[26]  A. Clappier,et al.  Summer ozone episodes in the Greater Madrid area. Analyzing the ozone response to abatement strategies by modelling , 2002 .

[27]  Steven J. Burian,et al.  National Urban Database and Access Portal Tool , 2009 .

[28]  E. Mlawer,et al.  Radiative transfer for inhomogeneous atmospheres: RRTM, a validated correlated-k model for the longwave , 1997 .

[29]  F. Kirchner,et al.  On the impact of urban surface exchange parameterisations on air quality simulations: the Athens case , 2003 .