Hybrid Combining of Directional Antennas for Periodic Broadcast V2V Communication

A hybrid analog-digital combiner for broadcast vehicular communication is proposed. It has an analog part that does not require any channel state information or feedback from the receiver, and a digital part that uses maximal ratio combining (MRC). We focus on designing the analog part of the combiner to optimize the received signal strength along all azimuth angles for robust periodic vehicle-to-vehicle (V2V) communication, in a scenario of one dominant component between the communicating vehicles (e.g., highway scenario). We show that the parameters of a previously suggested fully analog combiner solves the optimization problem of the analog part of the proposed hybrid combiner. Assuming <inline-formula> <tex-math notation="LaTeX">$L$ </tex-math></inline-formula> directional antennas with uniform angular separation together with the special case of a two-port receiver, we show that it is optimal to combine groups of <inline-formula> <tex-math notation="LaTeX">$\lceil {L/2}\rceil $ </tex-math></inline-formula> and <inline-formula> <tex-math notation="LaTeX">$\lfloor {L/2}\rfloor $ </tex-math></inline-formula> antennas in analog domain and feed the output of each group to one digital port. This is shown to be optimal under a sufficient condition on the sidelobes level of the directional antennas. Moreover, we derive a performance bound for the hybrid combiner to guide the choice of antennas needed to meet the reliability requirements of the V2V communication links.

[1]  B. Holter,et al.  The optimal weights of a maximum ratio combiner using an eigenfilter approach , 2002 .

[2]  Sanjit Krishnan Kaul,et al.  Effect of Antenna Placement and Diversity on Vehicular Network Communications , 2007, 2007 4th Annual IEEE Communications Society Conference on Sensor, Mesh and Ad Hoc Communications and Networks.

[3]  Fredrik Tufvesson,et al.  A geometry-based stochastic MIMO model for vehicle-to-vehicle communications , 2009, IEEE Transactions on Wireless Communications.

[4]  Fredrik Tufvesson,et al.  Directional Analysis of Vehicle-to-Vehicle Propagation Channels , 2011, 2011 IEEE 73rd Vehicular Technology Conference (VTC Spring).

[5]  Ignacio Santamaría,et al.  Beamforming Design for Simplified Analog Antenna Combining Architectures , 2011, IEEE Transactions on Vehicular Technology.

[6]  Christoph F. Mecklenbräuker,et al.  Assessment of design methodologies for vehicular 802.11p antenna systems , 2014, 2014 International Conference on Connected Vehicles and Expo (ICCVE).

[7]  Shajahan Kutty,et al.  Beamforming for Millimeter Wave Communications: An Inclusive Survey , 2016, IEEE Communications Surveys & Tutorials.

[8]  Andreas F. Molisch,et al.  Hybrid Beamforming for Massive MIMO: A Survey , 2017, IEEE Communications Magazine.

[9]  Edith Condo Neira,et al.  Antenna Evaluation for Vehicular Applications in Multipath Environment , 2017 .

[10]  Ingrid Moerman,et al.  A Survey on Hybrid Beamforming Techniques in 5G: Architecture and System Model Perspectives , 2018, IEEE Communications Surveys & Tutorials.

[11]  Antonios Tsourdos,et al.  Generalized Hybrid Beamforming for Vehicular Connectivity Using THz Massive MIMO , 2019, IEEE Transactions on Vehicular Technology.

[12]  Erik G. Ström,et al.  Robust Connectivity With Multiple Directional Antennas for Vehicular Communications , 2020, IEEE Transactions on Intelligent Transportation Systems.