Dynamic building envelope with PCM for cooling purposes – Proof of concept

A novel concept based on the dynamic use of phase change materials (PCM) in building envelopes is presented in this paper. The concept aims at breaking the main technical barriers that PCM have been dealing with in its application as passive cooling system: (i) solidification process of PCM is limited and (ii) peak cooling load is delayed but mainly discharged indoors. The concept relies on the ability of the system to modify the position of the PCM layer inside the building envelope with respect to the insulation layer. A proof of concept evaluation based on a numerical tool demonstrates the cooling load reduction potential of this technology when implemented in different construction systems. PCM peak melting temperature as well as the daily activations of the system were optimized using a Particle Swarm Optimization (PSO) algorithm. The numerical results indicate that the dynamic system facilitates dramatically the solidification process of PCM, allowing the system to be designed with lower PCM peak melting temperatures. The potential of the system to charge PCM which solidifies at temperatures lower than indoor set point, allows the technology to be used not only as a thermal barrier but as a cooling supplier system.

[1]  M. Farid.  A New Approach in the Calculation of Heat Transfer with Phase Change , 2021, Thermal Energy Storage with Phase Change Materials.

[2]  F. Kuznik,et al.  Experimental assessment of a phase change material for wall building use , 2009 .

[3]  Brent R. Young,et al.  Application of PCM Energy Storage in Combination with Night Ventilation for Space Cooling , 2015, Thermal Energy Storage with Phase Change Materials.

[4]  D. W. Yarbrough,et al.  Dynamic thermal performance analysis of fiber insulations containing bio-based phase change materials (PCMs) , 2012 .

[5]  R. Lehtiniemi,et al.  Numerical and experimental investigation of melting and freezing processes in phase change material storage , 2004 .

[6]  Luisa F. Cabeza,et al.  Phase change materials and thermal energy storage for buildings , 2015 .

[7]  John L. Wilson,et al.  Thermal performance of buildings integrated with phase change materials to reduce heat stress risks during extreme heatwave events , 2017 .

[8]  Luisa F. Cabeza,et al.  Use of microencapsulated PCM in concrete walls for energy savings , 2007 .

[9]  Luisa F. Cabeza,et al.  Development and characterization of new shape-stabilized phase change material (PCM)—Polymer including electrical arc furnace dust (EAFD), for acoustic and thermal comfort in buildings , 2013 .

[10]  amordadsolaradmin.  codigo-tecnico-de-la-edificacion , 2015 .

[11]  Mario A. Medina,et al.  Development of a thermally enhanced frame wall with phase‐change materials for on‐peak air conditioning demand reduction and energy savings in residential buildings , 2005 .

[12]  Riccardo Poli,et al.  Particle swarm optimization , 1995, Swarm Intelligence.

[13]  P. C. Tabares-Velasco,et al.  Parametric analysis of a residential building with phase change material (PCM)-enhanced drywall, precooling, and variable electric rates in a hot and dry climate , 2018, Applied Energy.

[14]  Stephen Sharples,et al.  The potential of phase change materials to reduce domestic cooling energy loads for current and future UK climates , 2015 .

[15]  Kambiz Vafai,et al.  Numerical heat transfer , 1990 .

[16]  W. Swinbank.  Long‐wave radiation from clear skies , 1963 .

[17]  Luisa F. Cabeza,et al.  Passive cooling of buildings with phase change materials using whole-building energy simulation tools: A review , 2017 .

[18]  Peter Schossig,et al.  Micro-encapsulated phase-change materials integrated into construction materials , 2005 .

[19]  Sheikh Ahmad Zaki,et al.  A review on phase change material (PCM) for sustainable passive cooling in building envelopes , 2016 .

[20]  S. Thelandersson,et al.  Estimating extreme values of thermal gradients in concrete structures , 2011 .

[21]  Jay G. Sanjayan,et al.  Energy saving potential of phase change materials in major Australian cities , 2014 .

[22]  Jlm Jan Hensen,et al.  Climate adaptive building shells: state-of-the-art and future challenges , 2013 .

[23]  Luisa F. Cabeza,et al.  Simulation-based optimization of PCM melting temperature to improve the energy performance in buildings , 2017 .

[24]  G. Zannis,et al.  Experimental thermal characterization of a Mediterranean residential building with PCM gypsum board walls , 2013 .

[25]  Yoon-Bok Seong,et al.  Energy saving potentials of phase change materials applied to lightweight building envelopes , 2013 .

[26]  Luisa F. Cabeza,et al.  Experimental set-up for testing active and passive systems for energy savings in buildings – Lessons learnt , 2018 .

[27]  James Kennedy,et al.  Particle swarm optimization , 2002, Proceedings of ICNN'95 - International Conference on Neural Networks.

[28]  José Antonio Almendros-Ibáñez,et al.  A numerical study of external building walls containing phase change materials (PCM). , 2012 .

[29]  D. Feldman,et al.  Full scale thermal testing of latent heat storage in wallboard , 1996 .

[30]  Luigi Marletta,et al.  A methodology for investigating the effectiveness of PCM wallboards for summer thermal comfort in buildings , 2013 .

[31]  Jan Kosny,et al.  Cost Analysis of Simple Phase Change Material-Enhanced Building Envelopes in Southern U . S . Climates , 2012 .

[32]  Luisa F. Cabeza,et al.  Economic impact of integrating PCM as passive system in buildings using Fanger comfort model , 2016 .

[33]  Jiawei Lei,et al.  Energy performance of building envelopes integrated with phase change materials for cooling load reduction in tropical Singapore , 2016 .

[34]  Fathollah Pourfayaz,et al.  Experimental studies on the applications of PCMs and nano-PCMs in buildings: A critical review , 2017 .

[35]  Jérôme Henri Kämpf,et al.  Indoor thermal comfort assessment using different constructive solutions incorporating PCM , 2017 .

[36]  Luisa F. Cabeza,et al.  Experimental study of using PCM in brick constructive solutions for passive cooling , 2010 .

[37]  Feng Xing,et al.  Energy and economic analysis of building integrated with PCM in different cities of China , 2016 .

[38]  Luisa F. Cabeza,et al.  Numerical study on the thermal performance of a ventilated facade with PCM , 2013 .

[39]  M. A. Medina,et al.  Assessing the integration of a thin phase change material (PCM) layer in a residential building wall for heat transfer reduction and management , 2015 .