An Unequally Spaced Multi-Tone Passive Load-Pull (USMT-PLP) to simultaneously characterize Linearity and Efficiency of RF Power Devices

This paper presents an experimental set-up to evaluate the in-band signal-to-noise radio degradation, through load-pull large signal measurement as proposed in [1].The Unequally Spaced Multi-Tone (UMST) is a tailored stimulus signal that presents flexible characteristics in terms of peak to average power ratio (PAPR), envelope probability density function (PDF), and radio-frequency (RF) bandwidth.The purpose of this measurement is to fully characterize third order intermodulation (IM3) products without involving any overlap between the different IM3 tones and the generated pilot tones.The automated test bench offers new perspectives for power amplifier (PA) designers, to design the output matching networks for achieving the best trade-off between linearity and efficiency. This is achieved by plotting simultaneously the impedance contours for a predetermined critera like the output power, the power added efficiency (PAE) or the carrier to intermodulation ratio (C/IM3). The USMT measurement can be also useful to perform nonlinearity measurement.

[1]  Fadhel M. Ghannouchi,et al.  Load-Pull Techniques with Applications to Power Amplifier Design , 2012 .

[2]  Fadhel M. Ghannouchi,et al.  Multitone power and intermodulation load-pull characterization of microwave transistors suitable for linear SSPA's design , 1997 .

[3]  Sylvain Laurent,et al.  A fully calibrated NVNA set-up for linearity characterization of RF power devices using Unequally Spaced Multi-Tone signal through IM3 & IM5 measurements , 2018, 2018 91st ARFTG Microwave Measurement Conference (ARFTG).

[4]  R. Westcott.  Investigation of multiple f.m./f.d.m. carriers through a satellite t.w.t. operating near to saturation , 1967 .

[5]  Jacques B. Sombrin,et al.  On the formal identity of EVM and NPR measurement methods: Conditions for identity of error vector magnitude and noise power ratio , 2011, 2011 41st European Microwave Conference.

[6]  Jacques Sombrin,et al.  A Multi-Tone Load Pull measurement system for on-wafer characterization of microwave power transistors , 2016, 2016 46th European Microwave Conference (EuMC).

[7]  M. Prigent,et al.  Envelope time-domain characterizations to assess in-band linearity performances of pre-matched MASMOS® power amplifier , 2017, 2017 IEEE Radio Frequency Integrated Circuits Symposium (RFIC).

[8]  R. Quere,et al.  A test set-up for the analysis of multi-tone intermodulation in microwave devices , 2014, 84th ARFTG Microwave Measurement Conference.

[9]  Jacques Sombrin,et al.  Linearity characterization of RF circuits through an unequally spaced multi-tone signal , 2016, 2016 88th ARFTG Microwave Measurement Conference (ARFTG).

[10]  Jong-Heon Kim,et al.  Load–Pull Characterization Using Different Digitally Modulated Stimuli , 2007, IEEE Microwave and Wireless Components Letters.